These were not caught by the previous patches because
the grep used ignored:
- anonymous structures
(e.g., "struct {")
- opening braces without leading spaces
(e.g., "struct Name{"),
- weird chars in auto-generation files
(e.g., "struct $name {").
- extra characters after the opening brace.
(e.g., "struct Name { // Comment")
- typedefs (note that this is not caught by the verifier)
(e.g., "typedef struct Name {")
Most of this has been fixed be grepping structures
with the following regex:
grep -nrE --exclude-dir=systemc \
"^ *(typedef)* *(struct|class|enum|union) [^{]*{$" src/
The following makes sure that "struct{" is captured:
grep -nrE --exclude-dir=systemc \
"^ *(struct|class|enum|union){" src/
To find cases that contain a comment after the
opening brace:
grep -nrE --exclude-dir=systemc \
"^ *(struct|class|enum|union)[^{]*{\s*//" src/
Change-Id: I9f822bed628d13b1a09ccd6059373aff63a8d7bd
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43505
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The only thing left in isa_traits.hh are two constants, one for the
number of bytes in a page, and one for how far to shift an address to
get the page number. To make it clear that this is the only thing
isa_traits.hh should be used for from this point forward (until it is
entirely eliminated), this change renames it to the much less generic
page_size.hh.
Also, because isa_traits.hh used to have *much* more stuff in it, it was
included in a lot of places it didn't need to be. This change also
clears out all these legacy includes while updating the actually needed
ones to the new name.
Change-Id: I939b01b117c53d620b6b0a98982f6f21dc2ada72
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40179
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Most ISAs used that constant exactly once, when setting up a Process.
This change just propogates the constant to the one place it's used. In
MIPS, the endianness is hard coded as little. There were some checks
which would change the behavior if the endianness was big. This change
removes that dead code. If someone wants to add support for big endian
MIPS, they can go back and add in the small bits of code that would be
required. It's likely the existing big endian support was incomplete and
not tested, so it's probably best for someone interested in it to start
fresh anyway.
Change-Id: Ife6ffcf4bca40001d5d9126f7d795f954f66bb22
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40178
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation (and 2 of 2 spaces,
1 of 3 spaces and 2 of 12 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *enum [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>enum X ... {
by:
<indent level>enum X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^enum ([A-Za-z].*) \{$/enum \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ enum ([A-Za-z].*) \{$/ enum \1\n \{/g'
and so on.
Change-Id: Ib186cf379049098ceaec20dfe4d1edcedd5f940d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In most ISAs except MIPS and Power, this was implemented as
inst->advancePC(). It works just fine to call this function all the
time, but the idea had originally been that for ISAs which could simply
advance the PC using the PC itself, they could save the virtual function
call. Since the only ISAs which could skip the call were MIPS and Power,
and neither is at the point where that level of performance tuning
matters, this function can be collapsed with little downside.
If this turns out to be a performance bottleneck in the future, the way
the PC is managed could be revisited to see if we can factor out this
trip to the instruction object in the first place.
Change-Id: I533d1ad316e5c936466c529b7f1238a9ab87bd1c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39335
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Alex Dutu <alexandru.dutu@amd.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This was an inline function defined for each ISA, but really it makes
more sense for it to be defined by the instruction classes. The actual
return address for any given instruction can best be calculated when you
know what that instruction actually does, and also the instructions will
know about ISA level PC management.
Change-Id: I2c5203aefa90f2f26ecd94e82b925c6b552e33d3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39324
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The patch is using the newly defined PARAMS macro to replace
custom params() getters in derived class.
The patch is also removing redundant _params:
Instead of creating yet another _params field, SimObject descendants
should use params() to expose the real type of SimObject::_params they
already have.
Change-Id: I43394cebb9661fe747bdbb332236f0f0181b3dba
Signed-off-by: Alexander Klimov <Alexander.Klimov@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39900
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This DPRINTF accesses the ExtMachInst typed machInst member of the
StaticInst class, and so is ISA dependent. Move the DPRINTF to where the
instructions are actually decoded where that type doesn't have to be
disambiguated.
Also, this change makes this DPRINTF more accurate, since microops are
not really "decoded" when they are extracted from a macroop. The process
of unpacking them to feed into the rest of the CPU should be fairly
trivial, so really they're just being retrieved. With the DPRINTF in
this new position, it will only trigger when an instruction is actually
decoded from memory.
Change-Id: I14145165b93bb004057a729fa7909cd2d3d34d29
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40099
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The base/refcnt.hh header was not used in base/types.hh at all, and
enum/ByteOrder.hh was there just so other files could find it. Instead,
this change moves enum/Byteorder.hh to sim/byteswap.hh where it's fits
with the purpose of the header.
This change also fixes some style problems with the code in
base/types.hh itself.
Change-Id: I471ae5cb2cca9169ba8616fb8411b40108a3ffb2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39855
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There were accessors for reading these indexes, but they were not
consistently used. This change makes them private to StaticInst, and
changes places that were accessing them directly to instead use the
accessors. New accessors are added for code generated by the ISA parser
and some ARM code to set the indexes without accessing them directly.
By forcing these values to be behind accessors, it will be much simpler
to change how those values are stored and retrieved.
Change-Id: Icca80023d7f89e29504fac6b194881f88aedeec2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36875
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The event in KVM x86 SE mode plays double duty, triggering a system call
or a page fault depending on where it's called from (the system call
handler vs page fault handler).
This means we can eliminate the page fault gem5 op and the
pseudo_inst.hh switching header file.
This change touches a lot of things, but there wasn't really a good
place to split it up which still made sense and was consistent and
functional.
Change-Id: Ic414829917bcbd421893aa6c89d78273e4926b78
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34165
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change replaces the __attribute__ syntax with the now standard [[]]
syntax. It also reorganizes compiler.hh so that all special macros have
some explanatory text saying what they do, and each attribute which has a
standard version can use that if available and what version of c++ it's
standard in is put in a comment.
Also, the requirements as far as where you put [[]] style attributes are
a little more strict than the old school __attribute__ style. The use of
the attribute macros was updated to fit these new, more strict
requirements.
Change-Id: Iace44306a534111f1c38b9856dc9e88cd9b49d2a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35219
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
A comment at the top of StaticInstFlags.py says that if IsMemRef is set,
exactly one of IsStore or IsLoad will be set. That's not strictly true
since IsAtomic may be set as well, in which case neither IsStore or
IsLoad will be set (in one example I found).
The isMemRef accessor still exists, and now just ors the IsStore,
IsLoad, and IsAtomic flags.
Change-Id: Ic5ff104da68978273977a6eff2abab5dd0ae7fda
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33744
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There were three different StaticInst flags for memory barriers,
IsMemBarrier, IsReadBarrier, and IsWriteBarrier. IsReadBarrier was never
used, and IsMemBarrier was for both loads and stores, so a composite of
IsReadBarrier and IsWriteBarrier.
This change gets rid of IsMemBarrier and replaces by setting
IsReadBarrier and IsWriteBarrier at the same time. An isMemBarrier
accessor is left, but is now implemented by checking if both of the
other flags are set, and renamed to isFullMemBarrier to make it clear
that it's checking both for both types of barrier, not one or the other.
Change-Id: I702633a047f4777be4b180b42d62438ca69f52ea
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33743
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
When the system call happens during the execution of the system call
instruction, it can be ambiguous what state takes precedence, the state
update from the instruction or the system call. These may be tracked
differently and found in an unpredictable order in, for example, the O3
CPU. An instruction can avoid updating any state explicitly, but
implicitly updated state (specifically the PC) will always update,
whether the instruction wants it to or not.
If the system call can be deferred by using a Fault object, then it's no
longer ambiguous. The PC update will be discarded, and the system call
can set the PC however it likes. Because there is no implicit PC update,
the PC needs to be walked forward, either to what it would have been
anyway, or to what the system call set in NPC.
In addition, because of the existing semantics around handling Faults,
the instruction no longer needs to be marked as serializing,
non-speculative, etc.
The "normal", aka architectural, aka FS version of the system call
instructions don't return a Fault artificially.
Change-Id: I72011a16a89332b1dcfb01c79f2f0d75c55ab773
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33281
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
The VAddr class wasn't used and was just a copy (with style fixes) of
the Alpha version.
Delete unused constants in isa_traits.hh, and remove unnecessary
includes. Replace MachineBytes with sizeof(uint32_t) in
arch/power/process.cc.
Change-Id: Ia4862448c43b2dd07078b1ebbbbfda4636343730
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33199
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
