Don't use the "E" tag when there is only a register or memory based
version of the instruction, since that decodes to both. Don't special
case the "st(1)" version of an instruction if it's just a matter of the
assembly syntax and not the instruction encoding. Don't decode based on
Mod, and then use the tag type "E" which will again decode on Mod, use
"E" for both the memory and register versions at the same time. Set the
default instruction to Inst::UD2 so that we don't have to specify it as
the default locally in each decode block. Let the "M" tag handle the Mod
= 3 case, which is built into that operand type. That's slightly
inconsistent with the "R" type which does not handle the "not 3" case,
but we can take advantage of it none the less.
There are instructions which, when decoded as the Inst format, will take
the "M" type tag and be able to drop their decoding of the Mod = 3 case,
but since they aren't Inst right now and can't sub-decode Mod on their
own, the 3 case needs to stay for now.
In most cases when dealing with x87 registers, the "dataSize" argument
to microops doesn't matter since the size doesn't change. There may be
an opportunity to consolidate the various FP microops and use dataSize
= 10 for x87 registers, although there are some nuances there that may
make that not work out.
Change-Id: Ia3ff6176796af66f6a3c463b538e750e65893a84
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42904
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
This commit removes functions that indexed into the
vectors that held the operands. Instead, for-each loops
are used, iterating through one of 6 vectors
(src, dst, srcScalar, srcVec, dstScalar, dstVec)
that all hold various (potentially overlapping)
combinations of the operands.
Change-Id: Ia3a857c8f6675be86c51ba2f77e3d85bfea9ffdb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42212
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
This change removes the GPUDynInstPtr argument from
getRegisterIndex(). The dynamic inst was only needed
to get access to its parent WF's state so it could
determine the number of scalar registers the wave was
allocated. However, we can simply pass the number of
scalar registers directly. This cuts down on shared
pointer usage.
Change-Id: I29ab8d9a3de1f8b82b820ef421fc653284567c65
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42210
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
The unnecessary DependenceTags is already being removed by another
pending change, and so is left in place for that to remove. Once that's
happened, the regs/*.hh includes can be removed, and there may be other
include related tangles to sort out.
Change-Id: I1c02aa8fd2f2045017609b70523b3519c2a92b03
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41742
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The only thing left in isa_traits.hh are two constants, one for the
number of bytes in a page, and one for how far to shift an address to
get the page number. To make it clear that this is the only thing
isa_traits.hh should be used for from this point forward (until it is
entirely eliminated), this change renames it to the much less generic
page_size.hh.
Also, because isa_traits.hh used to have *much* more stuff in it, it was
included in a lot of places it didn't need to be. This change also
clears out all these legacy includes while updating the actually needed
ones to the new name.
Change-Id: I939b01b117c53d620b6b0a98982f6f21dc2ada72
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40179
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Most ISAs used that constant exactly once, when setting up a Process.
This change just propogates the constant to the one place it's used. In
MIPS, the endianness is hard coded as little. There were some checks
which would change the behavior if the endianness was big. This change
removes that dead code. If someone wants to add support for big endian
MIPS, they can go back and add in the small bits of code that would be
required. It's likely the existing big endian support was incomplete and
not tested, so it's probably best for someone interested in it to start
fresh anyway.
Change-Id: Ife6ffcf4bca40001d5d9126f7d795f954f66bb22
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40178
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Previously, RISC-V FS support was unable to support O3CPU.
It was due to two issues:
1. CLINT was calling tc->setMiscRegNoEffect which triggers
a conditionalSquash on O3CPU. These frequent squashes led
to assertion error in src/cpu/o3/inst_queue_impl.hh line
1293 (we still suspect that the assertion might contain
some assumptions).
2. A CSR write to SATP needs to trigger a squash (since
MMU can be activated). This is done by conditionally
adding the IsSquashAfter flag to CSR operations if the
target is SATP. This is a simple fix. (Else, an auipc
right after a CSR write to SATP might compute the wrong
value). In the future, a better implementation should
only set the flag for writes to the relevant bit(s).
Change-Id: Ieb9fd0b9aa09e4d2f270b28c2297ea821a81bf65
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43244
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
Reviewed-by: Peter Yuen <petery.hin@huawei.com>
Changes:
1. RiscvBareMetal
The RiscvBareMetal class and API are preserved for backwards
compatibility, but the base class RiscvFSWorkload is removed
as it inherits from the Workload class. However, most needed
functionalities are already implemented in the KernelWorkload
class
2. RiscvLinux
The RiscvLinux class is added. A dtb filename can be specified
to be loaded to the corresponding memory address.
3. HiFive, Clint, Plic, Uart8250, VirtIOMMIO
Devicetree node generation function is added.
4. tlb, faults
Unnecessary includes of arch/riscv/fs_workload are removed.
Change-Id: Ia239b5614bd93d8e794330ead266f6121a4d13cb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42053
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *union [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>union X ... {
by:
<indent level>union X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^union [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^union ([A-Za-z].*) \{$/union \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ union [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ union ([A-Za-z].*) \{$/ union \1\n \{/g'
and so on.
Change-Id: I066854eb27a8acd2cc2dfa41596bb1b1f66c71b1
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43328
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation (and 2 of 2 spaces,
1 of 3 spaces and 2 of 12 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *enum [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>enum X ... {
by:
<indent level>enum X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^enum ([A-Za-z].*) \{$/enum \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ enum ([A-Za-z].*) \{$/ enum \1\n \{/g'
and so on.
Change-Id: Ib186cf379049098ceaec20dfe4d1edcedd5f940d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In most ISAs except MIPS and Power, this was implemented as
inst->advancePC(). It works just fine to call this function all the
time, but the idea had originally been that for ISAs which could simply
advance the PC using the PC itself, they could save the virtual function
call. Since the only ISAs which could skip the call were MIPS and Power,
and neither is at the point where that level of performance tuning
matters, this function can be collapsed with little downside.
If this turns out to be a performance bottleneck in the future, the way
the PC is managed could be revisited to see if we can factor out this
trip to the instruction object in the first place.
Change-Id: I533d1ad316e5c936466c529b7f1238a9ab87bd1c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39335
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Alex Dutu <alexandru.dutu@amd.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *class [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>class X ... {
by:
<indent level>class X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^class ([A-Za-z].*) \{$/class \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ class ([A-Za-z].*) \{$/ class \1\n \{/g'
and so on.
Change-Id: I17615ce16a333d69867b27c7bae0f4fdafd8b2eb
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39015
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There is no way to make this sort of template work with more than one
ISA at a time, and it's also more complex than it needs to be,
particularly since the methods within it are never used in performance
critical code. Using virtual functions is also simpler and uses less
code.
Change-Id: I0baa1a651fa656420f6f90776572f8700a6d7cab
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40106
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
For newer versions of libstdc++ (Like the one in the
ubuntu-20.04_all-dependencies docker image), the variables used when
rehashing, e.g., std::unordered_maps have been extended. This resulted
in the rehashing function using different, unimplemented, instructions.
Because these instructions are unimplemented, it resulted in a
std::bad_alloc exception when inserting into an unordered_map
This patchset implements the following instructions:
FCOMI, a floating point comparison instruction, using the compfp
microop. The implementation mirrors that of the FUCOMI instruction
(another floating point comparison instruction)
FSUBRP, a reverse subtraction instruction, is implemented using the
subfp microop like the FSUBP does, but with the operands flipped
accordingly.
FISTP, an instruction to convert a float to int and then store, is
implemented by using a conversion microop (cvtf_d2i) and then a store.
The cvtf_d2i microop is re-written to handle multple data sizes, as is
required by the FISTP instruction.
Change-Id: I85c57acace1f7a547b0a97ec3a0f0500909c5d2a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42443
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Added takeover methods for PMA Checker and RiscvTLB to ensure
that checkpoint restoration works. Also added logic in PLIC
to prevent posting interrupts to a CPU that has yet to complete
the current interrupt. PLIC's behaviour when a CPU claims another
interrupt before completion is also changed. Now PLIC will return
the uncompleted interrupt ID instead of return 0. This behaviour
is not documented in the specs but is designed this way to avoid
issues from CPU side (especially MinorCPU).
Change-Id: I68eaaf56d2c4d76cc1e0a1e2160f5abe184c2cd5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41933
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
This was an inline function defined for each ISA, but really it makes
more sense for it to be defined by the instruction classes. The actual
return address for any given instruction can best be calculated when you
know what that instruction actually does, and also the instructions will
know about ISA level PC management.
Change-Id: I2c5203aefa90f2f26ecd94e82b925c6b552e33d3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39324
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These currently only hold the number of registers in a particular class,
but can be extended in the future to hold other information about each
class. The ISA class holds a vector of descriptors which other parts of
gem5 can retrieve to set up storage for each class, etc.
Currently, the RegClass enum is used to explicitly index into the vector
of descriptors to get information about a particular class. Once enough
information is stored in the descriptors, the other parts of gem5 should
be able to set up for each register class generically, and the ISAs will
be able to leave out or create new register classes without having to
set up global plumbing for it.
The more immediate benefit is that this should (mostly) parameterize
away the ISA register constants to break another TheISA style
dependency. Currently a global set of descriptors are set up in the
BaseISA class using the old TheISA constants, but it should be easy to
break those out and make the ISAs set up their own descriptors. That
will bring arch/registers.hh significantly closer to being eliminated.
Change-Id: I6d6d1256288f880391246b71045482a4a03c4198
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41733
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This was set to 1, the same as SSrcReg1. That value is used to order the
registers in the source operand array. Other code then expects to find
operands in that order when, for example, looking up an index to pick
sub-parts of a register out, or to print a register name.
Since the index value of SSrcReg1 and SSrcReg2 were the same, they
wouldn't be sorted in a predictable way, meaning the code looking for
SSrcReg2's index might have found SSrcReg1's index instead and done the
wrong thing.
Change-Id: I75045e64595e249802f57d22023a7eeb7b8ac5c6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42342
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
