The AMPM paper (https://www.jilp.org/vol13/v13paper3.pdf) defines
the bandwidth-delay calculation as :
Mbandwidth= (Nrequests/Tepoch)×Tlatency
In the code, Tepoch and Tlatency are in ticks (which is okay),
but Tepoch is converted from Cycles (256K) to Ticks using the
clockEdge(Cycle c) function, which is incorrect as it yields currentTick
+ c * clockPeriod() instead of just c * clockPeriod().
In other words, the divider keeps increasing as time advances.
This patch substitutes clockEdge() with cyclesToTicks() to keep
the epoch length (Tepoch) constant throughout simulation.
Change-Id: I69dee29892fa4b9eb8de8715fd72a535e122687f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46479
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@huawei.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
According to the DPC paper : "If the best score is less
than or equal to a fixed value BADSCORE, we turn prefetchoff
during the next phase"
However, the current code will turn prefetch off if the best
*offset* of the learning phase is less than BADSCORE, which
is incorrect.
Change-Id: Ib5790fe1341f2dd6328ec3b018bc52012e376723
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46259
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@huawei.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
::Stats became ::statistics.
"statistics" was chosen over "stats" to avoid generating
conflicts with the already existing variables (there are
way too many "stats" in the codebase), which would make
this patch even more disturbing for the users.
Change-Id: If877b12d7dac356f86e3b3d941bf7558a4fd8719
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45421
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
::ProbePoints became ::probing.
"probing" was chosen over "probe_points" because the
namespace contains more than solely probe points; it
contains all classes related to the act of probing.
Change-Id: I44567974a521707593739a2bd5933391803e5b51
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45412
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
::Prefetcher became ::prefetcher.
"prefetch" was chosen over "prefetcher" to avoid generating
conflicts with the already existing variables. "prefetcher"
is a name that is expected to be more common in user's code
than "prefetch".
Change-Id: I8f07217f278a0229e05545b7847f2620ed208c66
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45410
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
::Compressor became ::compression.
"compression" was chosen over "compressor" to avoid
generating conflicts with the already existing variables,
as well as because the namespace contains more than solely
compressors (e.g., encoders).
Change-Id: I7054845984784b0dffcc4fb90d66c5096a64194d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45406
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
sim_clock::Int became sim_clock::as_int.
"as_int" was chosen because "int" is a reserved
keyword, and this namespace acts as a selector of
how to read the internal variables.
Another possibility to resolve this would be to
remove the namespaces "Float" and "Int" and use
unions instead.
Change-Id: I65f47608d2212424bed1731c7f53d242d5a7d89a
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45436
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Maintainer: Gabe Black <gabe.black@gmail.com>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
sim_clock::Float became sim_clock::as_float.
"as_float" was chosen because "float" is a reserved
keywords, and this namespace acts as a selector of
how to read the internal variables. Another
possibility to resolve this would be to remove the
namespaces "Float" and "Int" and use unions instead.
Change-Id: I7b3d9c6e9ab547493d5596c7eda080a25509a730
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45435
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Maintainer: Gabe Black <gabe.black@gmail.com>
The code in the body of a DPRINTF will always be compiled, even if it's
disabled. If TRACING_ON is false, the if around it will short circuit to
false without actually running any code to check the specified
condition, and the body of the if will be elided by the compiler as
unreachable code.
This creates a more consistent environment whether TRACING_ON is on or
not, so that variables which are only used in DPRINTF don't have to be
guarded by their own TRACING_ON #ifs at the call site. It also ensures
that the code inside DPRINTF is always checked to be valid code, even if
the DPRINTF itself will never go off. This helps avoid syntax errors,
etc, which aren't found because of the configuration of the build being
tested with.
Change-Id: Ia95ae229ebcd2fc9828f62e87f037f76b9279819
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44988
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
The GPU VIPER TCC protocol accidentally used "TiggerMsg" instead
of "TriggerMsg" for the triggerQueue_in port. This was a benign
bug beacuse the msg type is not used in the in_port implementation
but still makes the SLICC harder to understand, so fixing it is
worthwhile.
Change-Id: I88cbc72bac93bcc58a66f057a32f7bddf821cac9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44905
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
GPU MTYPE is currently set using a global config passed to the
PACoalescer. This patch enables MTYPE to be set by the shader on a
per-request bases. In real hardware, the MTYPE is extracted from a
GPUVM PTE during address translation. However, our current simulator
only models x86 page tables which do not have the appropriate bits for
GPU MTYPES. Rather than hacking non-x86 bits into our x86 page table
models, this patch instead keeps an interval tree of all pages that
request custom MTYPES in the driver itself. This is currently
only used to map host pages to the GPU as uncacheable, but is easily
extensible to other MTYPES.
Change-Id: I7daab0ffae42084b9131a67c85cd0aa4bbbfc8d6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42216
Maintainer: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
CfiMemory: This is modelling a flash memory adhering to the
Common Flash Interface (CFI):
JEDEC JESD68.01
JEDEC JEP137B
Intel Application Note 646
This is as of now a pure functional model of a flash controller: no
timing/power information has been encoded in it and it is therefore not
representive of a real device. Some voltage/timing values have
nevertheless been encoded in the CFI table. This is just a requirement
from the CFI specification: guest software might query those entries,
but they are not reflected in gem5 statistics.
The model is meant to be used to allow execution of flash drivers (e.g.
UEFI firmware storing EFI variables in non volatile memory)
JIRA: https://gem5.atlassian.net/browse/GEM5-913
Change-Id: Id99e331ac8237f3ecb69d618da0d7ca7b038cd1f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41495
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The Bridge SimObject, which hosts the CDC and SerDes functionality,
could be woken up out-of-order when changing frequencies in DVFS.
This change ensures there is no packet drop during the transition
times.
Change-Id: I40240dcb3e957217abd2d7ad22cc4f78809f7b49
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44287
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Flitbuffers act as FIFOs for internal links and output queues
in routers. This change replaces the use of vectors with deque
for performance improvements. The older implementation of using
a vector combined with a heap sort was both incorrect and
inefficient.
Incorrect because flit buffers should act strictly
as FIFO, sorting them based on time changes the order which affects
functionality in the case of DVFS enabled NoCs.
Change-Id: Ieba40f85628b7c7255e86792d40b8ce3d7ac34b5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44286
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The switch allocator implements a two step separable allocator and
utilizes port winner and vc winner data structures for functionality.
This improves the data structures used and their operations to improve
overall performance of the simulation. We start with an invalid output
port(-1) and an invalid vc(-1) and then allocate the outports
and vcs to inport.
Change-Id: I38b70ebdc1a54b8f748c2a5d510814bf139b9eaa
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44285
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These were not caught by the previous patches because
the grep used ignored:
- anonymous structures
(e.g., "struct {")
- opening braces without leading spaces
(e.g., "struct Name{"),
- weird chars in auto-generation files
(e.g., "struct $name {").
- extra characters after the opening brace.
(e.g., "struct Name { // Comment")
- typedefs (note that this is not caught by the verifier)
(e.g., "typedef struct Name {")
Most of this has been fixed be grepping structures
with the following regex:
grep -nrE --exclude-dir=systemc \
"^ *(typedef)* *(struct|class|enum|union) [^{]*{$" src/
The following makes sure that "struct{" is captured:
grep -nrE --exclude-dir=systemc \
"^ *(struct|class|enum|union){" src/
To find cases that contain a comment after the
opening brace:
grep -nrE --exclude-dir=systemc \
"^ *(struct|class|enum|union)[^{]*{\s*//" src/
Change-Id: I9f822bed628d13b1a09ccd6059373aff63a8d7bd
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43505
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Use SConsopts files local to individual domains to pull
non-foundational build code out of SConstruct. This greatly simplifies
SConstruct, and also makes it easier to find build configuration having
to do with particular pieces of gem5.
This change also converts some python level variables, all_protocols,
protocol_dirs, and slicc_includes, into the environment where the timing
of their initialization is more flexible.
Change-Id: Ie61ceb75ae9e5557cc400603c972a9582e99c1ea
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40872
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
This class, because it inherits from AddrMapper, would only poke its
upstream port to let it know to request its address range if it's
downstream port had asked it to. This doesn't make sense, since the
RangeAddrMapper has a fixed range it will respond to. Also, when the
RangeAddrMapper is notified that it's downstream port has an updated
range, the mapper should request that range and make sure all of the
addresses it will output are in the range the other object expects.
Change-Id: I57b558644b103822a9af53733bdb8518836ef5de
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43346
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The BUILD_GPU setting was being set by adding a -D to the command line
at the top level SConstruct. Instead, add BUILD_GPU to export_vars so
that it ends up in a config/build_gpu.hh header. Also switch it from the
fairly dangerous #ifdef style to the safer #if.
Change-Id: Ic93d37c9d7671023a6978842dbb2750c3e92f8d8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40873
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
