This commit removes functions that indexed into the
vectors that held the operands. Instead, for-each loops
are used, iterating through one of 6 vectors
(src, dst, srcScalar, srcVec, dstScalar, dstVec)
that all hold various (potentially overlapping)
combinations of the operands.
Change-Id: Ia3a857c8f6675be86c51ba2f77e3d85bfea9ffdb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42212
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
This change removes the GPUDynInstPtr argument from
getRegisterIndex(). The dynamic inst was only needed
to get access to its parent WF's state so it could
determine the number of scalar registers the wave was
allocated. However, we can simply pass the number of
scalar registers directly. This cuts down on shared
pointer usage.
Change-Id: I29ab8d9a3de1f8b82b820ef421fc653284567c65
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42210
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
The unnecessary DependenceTags is already being removed by another
pending change, and so is left in place for that to remove. Once that's
happened, the regs/*.hh includes can be removed, and there may be other
include related tangles to sort out.
Change-Id: I1c02aa8fd2f2045017609b70523b3519c2a92b03
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41742
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The SouthBridge used to have a parameter to point back at a Platform
object which it would dynamically cast to the Pc platform type, and it
would use that to tell the Pc platform where it was. The Pc platform
would then configure initial values in the SouthBridge during the init
phase. Now, the Pc platform has a parameter which by default
instantiates a SouthBridge, so that it will have a pointer
automatically. The Pc object knows it will have a SouthBridge, and now
the SouthBridge no longer has to assume that it's housed inside a Pc
platform.
Also, the SouthBridge device had instantiated a lot of child objects,
and then to ensure that they were accessible in c++, they were also set
as parameters on the object. Now, these children are created as the
default value for those parameters. They no longer have to be declared
and then separately hooked up as parameters. They could also
theoretically be replaced more easily since they're now only defaults,
although in practice that's unlikely.
Change-Id: I296b18a55ab6aedbb609ca4f545f7b19c21fd905
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43886
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This class, because it inherits from AddrMapper, would only poke its
upstream port to let it know to request its address range if it's
downstream port had asked it to. This doesn't make sense, since the
RangeAddrMapper has a fixed range it will respond to. Also, when the
RangeAddrMapper is notified that it's downstream port has an updated
range, the mapper should request that range and make sure all of the
addresses it will output are in the range the other object expects.
Change-Id: I57b558644b103822a9af53733bdb8518836ef5de
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43346
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The only thing left in isa_traits.hh are two constants, one for the
number of bytes in a page, and one for how far to shift an address to
get the page number. To make it clear that this is the only thing
isa_traits.hh should be used for from this point forward (until it is
entirely eliminated), this change renames it to the much less generic
page_size.hh.
Also, because isa_traits.hh used to have *much* more stuff in it, it was
included in a lot of places it didn't need to be. This change also
clears out all these legacy includes while updating the actually needed
ones to the new name.
Change-Id: I939b01b117c53d620b6b0a98982f6f21dc2ada72
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40179
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The BUILD_GPU setting was being set by adding a -D to the command line
at the top level SConstruct. Instead, add BUILD_GPU to export_vars so
that it ends up in a config/build_gpu.hh header. Also switch it from the
fairly dangerous #ifdef style to the safer #if.
Change-Id: Ic93d37c9d7671023a6978842dbb2750c3e92f8d8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40873
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This vestigial device provides a thin layer of indirection between
devices and the CPUs in a system. It's basically a collection of helper
functions, but since it's a SimObject it needs to be instantiated in
python and added to configurations.
Change-Id: I029d2314ae0bb890678e1e68dafcdab4bfe49beb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43347
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
dGPUs in all versions of ROCm and APUs starting with ROCM 2.2 can
under-allocate scratch resources. This patch adds support for
the CP to trigger a recoverable error so that the host can attempt to
re-allocate scratch to satisfy the currently stalled kernel.
Note that this patch does not include a mechanism to handle dynamic
scratch allocation for queues with in-flight kernels, as these queues
would first need to be drained and descheduled, which would require some
additional effort in the hsaPP and HW queue scheduler. If the CP
encounters this scenerio it will assert. I suspect this is not a
particularly common occurence in most of our applications so it is left
as a TODO.
This patch also fixes a few memory leaks and updates the old DMA callback
object interface to use a much cleaner c++11 lambda interface.
Change-Id: Ica8a5fc88888283415507544d6cc49fa748fe84d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42201
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
In the HSAQueueDescriptor ptr function, we mod the index by numElts, but
numElts was previously just set to size, which was the raw size of the
queue. This lead to indexing past the queue. We fix this by dividing by
the size by the AQL packet size to get the actual number of elements the
queue can hold.
We also add an assert for indexing into the queue, as there is a
scenario where the queue reports a larger size than it actually is.
Change-Id: Ie5e699379f303255305c279e58a34dc783df86a0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42423
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Most ISAs used that constant exactly once, when setting up a Process.
This change just propogates the constant to the one place it's used. In
MIPS, the endianness is hard coded as little. There were some checks
which would change the behavior if the endianness was big. This change
removes that dead code. If someone wants to add support for big endian
MIPS, they can go back and add in the small bits of code that would be
required. It's likely the existing big endian support was incomplete and
not tested, so it's probably best for someone interested in it to start
fresh anyway.
Change-Id: Ife6ffcf4bca40001d5d9126f7d795f954f66bb22
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40178
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Previously, RISC-V FS support was unable to support O3CPU.
It was due to two issues:
1. CLINT was calling tc->setMiscRegNoEffect which triggers
a conditionalSquash on O3CPU. These frequent squashes led
to assertion error in src/cpu/o3/inst_queue_impl.hh line
1293 (we still suspect that the assertion might contain
some assumptions).
2. A CSR write to SATP needs to trigger a squash (since
MMU can be activated). This is done by conditionally
adding the IsSquashAfter flag to CSR operations if the
target is SATP. This is a simple fix. (Else, an auipc
right after a CSR write to SATP might compute the wrong
value). In the future, a better implementation should
only set the flag for writes to the relevant bit(s).
Change-Id: Ieb9fd0b9aa09e4d2f270b28c2297ea821a81bf65
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43244
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
Reviewed-by: Peter Yuen <petery.hin@huawei.com>
Changes:
1. RiscvBareMetal
The RiscvBareMetal class and API are preserved for backwards
compatibility, but the base class RiscvFSWorkload is removed
as it inherits from the Workload class. However, most needed
functionalities are already implemented in the KernelWorkload
class
2. RiscvLinux
The RiscvLinux class is added. A dtb filename can be specified
to be loaded to the corresponding memory address.
3. HiFive, Clint, Plic, Uart8250, VirtIOMMIO
Devicetree node generation function is added.
4. tlb, faults
Unnecessary includes of arch/riscv/fs_workload are removed.
Change-Id: Ia239b5614bd93d8e794330ead266f6121a4d13cb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42053
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *union [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>union X ... {
by:
<indent level>union X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^union [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^union ([A-Za-z].*) \{$/union \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ union [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ union ([A-Za-z].*) \{$/ union \1\n \{/g'
and so on.
Change-Id: I066854eb27a8acd2cc2dfa41596bb1b1f66c71b1
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43328
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation (and 2 of 2 spaces,
1 of 3 spaces and 2 of 12 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *enum [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>enum X ... {
by:
<indent level>enum X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^enum ([A-Za-z].*) \{$/enum \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ enum ([A-Za-z].*) \{$/ enum \1\n \{/g'
and so on.
Change-Id: Ib186cf379049098ceaec20dfe4d1edcedd5f940d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In most ISAs except MIPS and Power, this was implemented as
inst->advancePC(). It works just fine to call this function all the
time, but the idea had originally been that for ISAs which could simply
advance the PC using the PC itself, they could save the virtual function
call. Since the only ISAs which could skip the call were MIPS and Power,
and neither is at the point where that level of performance tuning
matters, this function can be collapsed with little downside.
If this turns out to be a performance bottleneck in the future, the way
the PC is managed could be revisited to see if we can factor out this
trip to the instruction object in the first place.
Change-Id: I533d1ad316e5c936466c529b7f1238a9ab87bd1c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39335
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Alex Dutu <alexandru.dutu@amd.com>
