The only thing left in isa_traits.hh are two constants, one for the
number of bytes in a page, and one for how far to shift an address to
get the page number. To make it clear that this is the only thing
isa_traits.hh should be used for from this point forward (until it is
entirely eliminated), this change renames it to the much less generic
page_size.hh.
Also, because isa_traits.hh used to have *much* more stuff in it, it was
included in a lot of places it didn't need to be. This change also
clears out all these legacy includes while updating the actually needed
ones to the new name.
Change-Id: I939b01b117c53d620b6b0a98982f6f21dc2ada72
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40179
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There is no way to make this sort of template work with more than one
ISA at a time, and it's also more complex than it needs to be,
particularly since the methods within it are never used in performance
critical code. Using virtual functions is also simpler and uses less
code.
Change-Id: I0baa1a651fa656420f6f90776572f8700a6d7cab
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40106
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This register is used since the Linux kernel 5.6 aarch64 boot.
This register indicates CPU capabilities in aarch32 mode, and it has the
same value as the aarch32 ID_ISAR6 miscregister, which is also added.
The capability values of those registers are analogous to those present in
aarch64 accessible ID_AA64ISAR0_EL1 and ID_AA64ISAR1_EL1, which refer to
aarch64 capabilities however, and were already implemented before this
commit.
The arm architecture document clarifies that reads to this system register
location before it had been defined should return 0, but we were faulting
instead:
> Prior to the introduction of the features described by this register,
this register was unnamed and reserved, RES0 from EL1, EL2, and EL3.
Change-Id: I70e99536dc98925e88233fd4c6887bbcdd5d87dc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30935
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This macro probably would have been defined to "return" in some cases,
to be put after a call to a function that doesn't return so that the
compiler wouldn't think control would reach the end of a non-void
function. It was only ever defined to expand to nothing, and now that
[[noreturn]] is a standard attribute, it should never be needed going
forward.
Change-Id: I37625eab72deeaede77f9347116b9fddd75febf7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35217
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch adds Secure EL2 feature. This allows stage1
EL2/EL&0 and stage2 secure translation.
The changes are organized as follow:
+ insts/static_inst.cc: Modify checks for illegalInstruction on eret
+ isa.cc/hh: Enabling contorl bits
+ isa/insts/misc.hh/64.hh: Smc fault trigger.
+ miscregs.cc/hh: Declaration and initialization of new registers
+ self_debug.cc/hh: Add secureEL2 types for breakpoints
+ stage2_lookup.cc/hh: Allow stage2 in secure state.
+ tlb.cc/table_walker.cc: Allow secure state for stage2 and stage 1 EL2&0
translation regime
+ utility.cc/hh: New function InSecure and refactor of other helpers
to enable secure state
JIRA: https://gem5.atlassian.net/browse/GEM5-686
Change-Id: Ie59438b1828508e944334420da1d8f4745649056
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31394
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This code implementes hardware breakpoint exception as part of
software debug explained in ARMv8 reference manual ChapterD2.
+ ArmISA.py: Modify register to allow up to 15 Breakpoint registers
+ Sconscript: Add new file self_debug
+ faults.cc/hh: Defintion and implementation of HardwareBreakpoint
exception inheriting ArmFault.
+ isa.cc/hh: ArmISA contains now an attribute pointing to the SelfDebug
object that will be used to be access SelfDebug infrastructure
Added special cases for setMiscReg to cache debug enable bits.
+ miscregs.hh/cc: Definition and initialization of DBGDCn and DBGDVn
registers.
+ tlb.cc/hh: We include the access to check for breakpoint instruction as
part of the tlb translation process, checking if it comes from a
fetch in the itlb
+ types.hh: Definition of new bitwise register types.
+ utility.cc/hh: Definition and implementation of auxiliar functions for
the selfDebug.
+ self_debug.hh/cc: Main files that include the implemenattion of
breakpoint checks, selfdebug enable and auxiliar functions.
Change-Id: I0e2a4be7f778de560c512253a9148da61e3e7e7a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27967
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This function is no longer used anywhere in gem5.
Small helper functions which had been put alongside vtophys on ARM and
RISCV were also moved into src/arch/arm/remote_gdb.cc and
src/arch/power/pagetable.hh, the only places they were used.
Change-Id: Iba72f6c4b797a35a785a5bb781d602c943541fa7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26234
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
+ ArmISA.py: Enabling the feature adding QARMA algorithm as default.
+ faults.cc/faults.hh: Add PACTrapFault
+ includes/insts.isa: Adding new isa files.
+ aarch64.isa: Add decode part for PAC instructions
+ pauth.isa: Isa for PAC instructions
+ misc64.isa: PAC instructions templates
+ miscregs.cc/hh/types: New Registers for PAC Key low/high.
+ types.hh: Modification of system registers that were incomplete
for ARMv8
+ utility.hh: Add isSecureEL2 enabled. The function is there but will
always return false for now.
+ pauth_helpers.hh/cc: Implementation of auxiliar functions and derivates.
+ qarma.hh/cc: This functions follow ARMv8 reference pseudo code
implementing QARMA block cipher algorithms.
Change-Id: I3095a1279204206d9a816a4fb7fc176c18f9680b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25024
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These two functions were called in exactly one place one right after
the other, and served similar purposes.
This change merges them together, and cleans them up slightly. It also
removes checks for FullSystem, since those functions are only called
in full system to begin with.
Change-Id: I214f7d2d3f88960dccb5895c1241f61cd78716a8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24904
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
VecElem code had been introduced in order to simulate change of renaming
for vector registers. Most of the work is happening on the rename_map
switchRenameMode. Change of renaming can happen after a squash in the
pipeline.
This patch is also changing the interface to the ISA part so that
a PCState is used instead of ISA in order to check if rename mode
has changed.
Change-Id: I8af795d771b958e0a0d459abfeceff5f16b4b5d4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15601
Trying to read MPIDR(_EL1) from EL1, should return the value of
VMPIDR_EL2 if EL2 is enabled. This patch is modifying the utility
function for reading MPIDR in order to match this behaviour for both
AArch32 and AArch64.
Change-Id: I32c2d4d5052f509e6e0542a5314844164221c6a3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15617
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch refactors AArch64 MSR/MRS trapping, by moving the trapping
helpers in arch/arm/utility and in the isa code into a MiscRegOp64
class.
This class is the Base class for a generic AArch64 instruction which is
making use of system registers (MiscReg), like MSR,MRS,SYS. The common
denominator or those instruction is the chance that the system register
access is trapped to an upper Exception level. MiscRegOp64 is providing
that feature.
What do we gain? Other "pseudo" instructions, like access to
implementation defined registers can inherit from this class to make use
of the trapping functionalities even if there is no data movement
between GPRs and system register.
Change-Id: I0924354db100de04f1079a1ab43d4fd32039e08d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13778
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
According to the arm arm, CPTR_EL3.TCPAC traps EL2 accesses to the
CPTR_EL2 or HCPTR, and EL2 and EL1 accesses to the CPACR_EL1 or CPACR,
are trapped to EL3, unless they are trapped by CPTR_EL2.TCPAC.
Change-Id: I637be35b29db39f044dda0c6cc4fe986c9620371
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13775
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
