As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
::Stats became ::statistics.
"statistics" was chosen over "stats" to avoid generating
conflicts with the already existing variables (there are
way too many "stats" in the codebase), which would make
this patch even more disturbing for the users.
Change-Id: If877b12d7dac356f86e3b3d941bf7558a4fd8719
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45421
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In this context, the decoder width is the number of bytes that are fed
into the decoder at once. This is frequently the same as the size of an
instruction, but in instructions with occasionally variable instruction
sizes (ARM, RISCV), or extremely variable instruction sizes (x86) there
may be no relation.
Rather than determining the amount of data to feed to the decoder based
on a MachInst type defined by each ISA, this new interface adds some new
properties to the base InstDecoder class each arch specific decoder
inherits from. These are the size of the incoming buffer, a pointer to
wherever that data should end up, and a mask for masking a PC value so
it aligns with the instruction size.
These values are filled in by a templated InstDecoder constructor which
is templated based on what would have historically been the MachInst
type.
Because the "moreBytes" method would historically accept a parameter of
type MachInst, this parameter has also been eliminated. Now, the
decoder's parent object should use the pointer and size values to fill
in the buffer moreBytes reads. Then when moreBytes is called, it just
uses the buffer without having to show what its type is externally.
Change-Id: I0642cdb6a61e152441ca4ce47d748639175cda90
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40175
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There is a design which has been put forward which eliminates the idea
of a zero register entirely, but in the mean time, to get rid of one
more ISA specific constant, this change moves the ZeroReg constant into
the RegClassInfo class, specifically the IntRegClass instance which is
published by each ISA.
When the idea of zero registers has been eliminated entirely from
non ISA specific code, this and the existing machinery can be
eliminated.
Change-Id: I4302a53220dd5ff6b9b47ecc765bddc6698310ca
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42685
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The nullStaticInstPtr was low overhead, but the nopStaticInstPtr needed
an actual StaticInst implementation it could point to, and that brought
with it some (minor) additional dependencies. Specifically, the
implementation of advancePC needs the definition of TheISA::PCState,
while all other signatures/impementations in StaticInst are already
passing around that type by reference or could be made to, reducing
dependencies further.
Change-Id: I9ac6a6e5a3106858ea1fc727648f61dc39738a59
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42968
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation (and 2 of 2 spaces,
1 of 3 spaces and 2 of 12 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *enum [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>enum X ... {
by:
<indent level>enum X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^enum ([A-Za-z].*) \{$/enum \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ enum ([A-Za-z].*) \{$/ enum \1\n \{/g'
and so on.
Change-Id: Ib186cf379049098ceaec20dfe4d1edcedd5f940d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In most ISAs except MIPS and Power, this was implemented as
inst->advancePC(). It works just fine to call this function all the
time, but the idea had originally been that for ISAs which could simply
advance the PC using the PC itself, they could save the virtual function
call. Since the only ISAs which could skip the call were MIPS and Power,
and neither is at the point where that level of performance tuning
matters, this function can be collapsed with little downside.
If this turns out to be a performance bottleneck in the future, the way
the PC is managed could be revisited to see if we can factor out this
trip to the instruction object in the first place.
Change-Id: I533d1ad316e5c936466c529b7f1238a9ab87bd1c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39335
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Alex Dutu <alexandru.dutu@amd.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This DPRINTF accesses the ExtMachInst typed machInst member of the
StaticInst class, and so is ISA dependent. Move the DPRINTF to where the
instructions are actually decoded where that type doesn't have to be
disambiguated.
Also, this change makes this DPRINTF more accurate, since microops are
not really "decoded" when they are extracted from a macroop. The process
of unpacking them to feed into the rest of the CPU should be fairly
trivial, so really they're just being retrieved. With the DPRINTF in
this new position, it will only trigger when an instruction is actually
decoded from memory.
Change-Id: I14145165b93bb004057a729fa7909cd2d3d34d29
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40099
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This was mostly not used to begin with, but also when it was used, it
would obscure places where there were types, functions, etc, which were
switched between ISAs at compile time, and which would need to be
cleaned up to allow more than one ISA at a time.
Change-Id: Ieb372feff91b7e946b477fb78e54bcd0c2138966
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39655
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
If the memory system can provide a back door to memory, store that, and
use it for subsequent accesses to the range it covers. For now, this
covers only fetch. That's because fetch will generally happen more than
loads and stores, and because it's relatively simple to implement since
we can ignore atomic operations, etc.
Some limitted benchmarking suggests that this speeds up x86 linux boot
by about 20%, although my modifications to the config to remove caching
(which blocks the back door mechanism) also made gem5 crash, so it's
hard to say for sure if that's a valid result. The crash happened in the
same way before and after, so it's probably at least relatively
representative.
While this gives a pretty substantial performance boost, it will prevent
statistics from being collected at the memory, or on intermediate objects
in the interconnect like the bus. That is to be expected with this
memory mode, however.
Change-Id: I73f73017e454300fd4d61f58462eb4ec719b8d85
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36979
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The byteEnable variable is used for masking bytes in a memory request.
The default behaviour is to provide from the ExecContext to the CPU
(and then to the LSQ) an empty vector, which is the same as providing
a vector where every element is true.
Such vectors basically mean: do not mask any byte in the memory request.
This behaviour adds more complexity to the downstream LSQs, which now
have to distinguish between an empty and non-empty byteEnable.
This patch is simplifying things by transforming an empty vector into
a all true one, making sure the CPUs are always receiving a non empty
byteEnable.
JIRA: https://gem5.atlassian.net/browse/GEM5-196
Change-Id: I1d1cecd86ed64c53a314ed700f28810d76c195c3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23285
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>
This change replaces the __attribute__ syntax with the now standard [[]]
syntax. It also reorganizes compiler.hh so that all special macros have
some explanatory text saying what they do, and each attribute which has a
standard version can use that if available and what version of c++ it's
standard in is put in a comment.
Also, the requirements as far as where you put [[]] style attributes are
a little more strict than the old school __attribute__ style. The use of
the attribute macros was updated to fit these new, more strict
requirements.
Change-Id: Iace44306a534111f1c38b9856dc9e88cd9b49d2a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35219
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
System calls should now be requested from the workload directly and not
routed through ExecContext or ThreadContext interfaces. That removes a
major special case for SE mode from those interfaces.
For now, when the SE workload gets a request for a system call, it
dispatches it to the appropriate Process object. In the future, the
ISA specific Workload subclasses will be responsible for handling system
calls and not the Process classes.
For simplicity, the Workload syscall() method is defined in the base
class but will panic everywhere except when SEWorkload overrides it. In
the future, this mechanism will turn into a way to request generic
services from the workload which are not necessarily system calls. For
instance, it could be a way to request handling of a page fault without
having to have another PseudoInst just for that purpose.
Change-Id: I18d36d64c54adf4f4f17a62e7e006ff2fc0b22f1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33282
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In most cases, the microcode ROM doesn't actually do anything. The
structural existence of a microcode ROM doesn't make sense in the
general case, and in architectures that know they have one and need to
interact with it, they can cast their decoder into an arch specific type
and access the ROM that way.
Change-Id: I25b67bfe65df1fdb84eb5bc894cfcb83da1ce64b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32898
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This code was at least a little Alpha specific, and now that Alpha is
gone it can no longer be compiled. We could either fix it up to work
with other/all ISAs or delete it, and the consensus was to delete it. It
could potentially be revived in the future by retrieving it from version
control.
Change-Id: Ied073f2b9b166951ecba3442cd762eb19bc690b3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32954
Reviewed-by: Steve Reinhardt <stever@gmail.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This parameter is associated with a periodic event which would take a
sample for a kernel profile in FS mode. Unfortunately the only ISA which
had working versions of the necessary classes was alpha, and that has
been deleted. That means that without additional work for any given ISA,
the profile parameter has no chance of working.
Ideally, this parameter should be moved to the Workload classes. There
it can intrinsically be tied to a particular kernel, rather than having
to assume a particular kernel and gate everything on whether you're in
FS mode.
Because this isn't (IMHO) where this parameter should live in the long
term, and because it's currently unusable without additional development
for each of the ISAs, I think it makes the most sense to remove the
front end for this mechanism from the CPU.
Since the sampling/profiling mechanism itself could be useful and could
be re-plumbed somewhere else, the back end and its classes are left alone.
Change-Id: I2a3319c1d5ad0ef8c99f5d35953b93c51b2a8a0b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32214
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch sets the faulting flag in atomic, timing, minor and o3 CPU
models.
It also fixes the minor/timing CPU models which were not respecting the
ExecFaulting flag. This is now checked before calling dump() on the
tracing object, to bring it in line with the other CPU models.
Change-Id: I9c7b64cc5605596eb7fcf25fdecaeac5c4b5e3d7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30135
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
