These types are IntReg, FloatReg, FloatRegBits, and MiscReg. There are
some remaining types, specifically the vector registers and the CCReg.
I'm less familiar with these new types of registers, and so will look
at getting rid of them at some later time.
Change-Id: Ide8f76b15c531286f61427330053b44074b8ac9b
Reviewed-on: https://gem5-review.googlesource.com/c/13624
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
The PL011 spec specifies a DMACR register at offset 0x48, which isn't
implemented in the model. Currently any attempt to access the register
results in a panic.
This change swaps the panic for a warning only when software writes into
DMACR to disable DMA, keeping the panic otherwise.
Change-Id: I04586b52df8d5d174536276fd7ae19e77ff4681a
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15279
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Implementation registers for the GICv2 model currently hold values
referring to a GIC-400 implementation. This patch is making them
parametrizable so that it is possible to instantiate a GIC-400 model.
The patch is also modifying Realview platform to use new GIC-400 model
in lieau of GICv2.
Change-Id: I446db8c796ee3c2708af91e9139f0a6e7947321b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15277
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
GIC architecture specification says that writing EOIR with
a not active irq it is an unpredictable behavior.
So, just warn when it happens for a PPI case, like it is
already done in SPI case.
Change-Id: Icb1b8f5690d5e87b15c3b0fe2ca0d37fdd4085ee
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13556
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This is an old platform, and we haven't had official Linux kernel configs
for it in a while, so we've decided to deprecate it.
Furthermore, trying to use it fails with:
object 'RealViewEB' has no attribute 'pci_host'
and the last commit in the class happened two years ago, which indicates
that no one has been using it.
Change-Id: Icc674b00b152eb3246e05141dbaf2624cc720f21
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12471
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Read/WriteCpu methods in the GICv2 are accessing the GICC_CTRL register
as if writing any non-zero value to the register will enable IRQ
signaling to the CPU. Instead, only the 2 least significant bits
control group0/group1 enablement. This patch is renaming GICC_CTRL
underlying data buffer from cpuEnabled to cpuControl and it is making it
an array of uint32_t instead of bool. cpuEnabled now becomes a method
and checks if GICC_CTRL.EnableGrp0 or GICC_CTRL.EnableGrp0 are set.
Change-Id: I40f0b3c52c40abd482a856f032bf3686f96ef641
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12945
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
From GCC 8.1 on GCC issues a warning when using memset et al on structs and
classes. With the way gem5 builds, this actually prevents successful
builds.
Instead of using a pointer with SCSIReply as type, we cast to a void
pointer to avoid the message. On the way we wrap the memset call into a
method of SCSIReply called reset for better code readability.
Signed-off-by: Maurice Becker <madnaurice@googlemail.com>
Change-Id: I3ed3fd9714be5d253aba01ca00b1863e1ae5cb68
Reviewed-on: https://gem5-review.googlesource.com/12685
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
UART_RSR shows errors with the transmission and UART_ECR can clear
those (according to PL011 Technical Reference Manual Revision r1p4). As
these transmission errors never occur, they are implemented as RAZ/WI.
Both registers exist at the same offset 0x004. RSR is read-only, ECR is
write-only.
Signed-off-by: Maurice Becker <madnaurice@googlemail.com>
Change-Id: Ia9d13c90c65feccf3ecec36a782170755b1e1c02
Reviewed-on: https://gem5-review.googlesource.com/12686
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
fs.py in baremetal mode currently fails for the VExpress_GEM5_V1 platform
due to inconsistent UART naming with error message:
AttributeError: object 'VExpress_GEM5_V1' has no attribute 'uart'
Consistently name keep all UARTs in the Arm platforms in a vector named
'uart' or as a single device named 'uart'. Update the configuration
scripts to reflect the fact that 'uart' can be a vector.
Change-Id: I20b8dbac794d6a9be19b6ce8c335a097872132fb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12473
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The Pl390 model has evolved and acquired a lot of the features from GICv2,
which means that the name is no longer appropriate. Rename it to GICv2
since this is more representative of the supported features.
GICv2 is backwards compatible with the older Pl390, so we decided to
simply rename the class to represent both GICv2 and older interfaces such
as the instead of creating a new separate one.
Change-Id: I1c05fba8b3cb5841c66480e9f05b8c873eba3229
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12492
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Remove default dist_addr and cpu_addr register addresses since those are
purely platform specific.
Parametrize the cpu_size parameter. RealViewPBX has the Gic CPU and
distributor base too close for the newer CPU size of 0x2000, leading to
overlap.
This was introduced in I90a9f669a46a37d79c6cc542087cf91f2044f104 and makes
using RealViewPBX fail with:
fatal: system.membus has two ports responding within range
[0x1f000100 : 0x1f0020ff]:
system.realview.gic.pio
system.realview.gic.pio
Change-Id: Ic6c0e6b3d4705ff369eb739d54a1173a47819b7d
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12491
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
With this patch the python ArmInterruptPin SimObject matches to the
C++ ArmInterruptPinGen. The latter is in charge of generating
the ArmInterruptPin (which is not a SimObject anymore).
This is meant to ease the generation of ArmInterruptPins: by
not being SimObjects we are not forced to instantiate them
in the configuration script; we can generate them dynamically
instead throughout simulation.
Change-Id: I917d73a26168447221f5993c8ae975ee3771e3bf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12401
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The GICv2 specifies that 8KiB of the memory map is allocated to the
CPU interface and 4KiB is allocated to the distributor. The current
distributor size is off by 1 and the CPU interface is completely off
by a lot.
Change-Id: I90a9f669a46a37d79c6cc542087cf91f2044f104
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11769
The platform code uses a custom mechanism to traverse the object
hierarchy when generating device trees. This is highly undesirable
since this breaks for common cases such as when SimObjects are stored
in a list.
Change-Id: I1b968e5fa1db62f1456e3c0ac3de47ab1299e58d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10781
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Add a new VExpress_GEM5_V1_Base Platform which configures basic on
chip devices. The original VExpress_GEM5_V1 will inherit the Base and
add more on chip devices (currently only the HDLCD). This change will
make it possible to create variations of the base platform with
different devices.
Change-Id: I21f9bf4f6217d87e811ff777f630122593eef013
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10807
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
The MMIO interface currently only supports a subset of version 0.9.5
of the VirtIO specification. It has the following known limitations:
* The queue size hint (the QUEUE_NUM register) is ignored.
* Queue alignment is assumed to be hard-coded to
VirtQueue::ALIGN_SIZE (4096 bytes).
* Only 4096 byte pages are currently supported.
Change-Id: Ifd318f5e5bddab0b6a42d8c8af9ff2fbb477f98b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Rekai Gonzalez Alberquilla <rekai.gonzalezalberquilla@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Add GIC-based interrupt adaptor implementations that support PPI
(ArmPPI) and SPI (ArmSPI) delivery. In addition to being useful for
"normal" memory-mapped devices, the PPI adaptor makes it possible to
use the same device model to generate both PPIs and SPIs (e.g., the
PMU).
Change-Id: I73d6591c168040faef2443430c4f1da10c387a2a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2521
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
These are single byte commands which change the mode of the mouse. They don't
take any additional parameters like the SetRate or SetResolution.
Change-Id: I29194916cfed5d3f4893947ef6d6cc636aee2419
Reviewed-on: https://gem5-review.googlesource.com/9701
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Prior to this changeset the bootloader rom (instantiated as a
SimpleMemory) in ruby Arm systems was treated as an IO device and it
was fronted by a DMA controller. This changeset moves the bootloader
rom and adds it to the system as another memory with a dedicated
directory controller.
Change-Id: I094fed031cdef7f77a939d94f948d967b349b7e0
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Enables automatic generation of Device Trees for RealView PCI host
controllers. Note that some parts are more hard coded than you'd want,
but this is due to the limited understanding the PCI host has of its
configuration (i.e. it doesn't know all memory ranges). Fixing this,
for now at least, went beyond the scope and intentions of the
Device Tree generating code: use with care!
Change-Id: I2041871e0eb4d04fb5191257c47dd38649d1c0cc
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5967
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
