While it's plausible to define the cache_line_size as a 32-bit unsigned
int, the use of cache_line_size is way out of its original scope.
cache_line_size has been used to produce an address mask, which masking
out the offset bits from an address. For example, [1], [2], [3], and
[4]. However, since the cache_line_size is an "unsigned int", the type
of the value is not guaranteed to be 64-bit long. Subsequently, the bit
twiddling hacks in [1], [2], [3], and [4] produce 32-bit mask, i.e.,
0x00000000FFFFFFC0.
This behavior at least caused a problem in LLSC in RISC-V [5], where the
load reservation (LR) relies on the mask to produce the cache block
address. Two distinct 64-bit addresses can be mapped to the same cache
block using the above mask.
This patch explicitly defines cache_line_size as a 64-bit unsigned int
so the cache block mask can be produced correctly for 64-bit addresses.
[1]
3bdcfd6f7a/src/cpu/simple/atomic.hh (L147)
[2]
3bdcfd6f7a/src/cpu/simple/timing.hh (L224)
[3]
3bdcfd6f7a/src/cpu/o3/lsq_unit.cc (L241)
[4]
3bdcfd6f7a/src/cpu/minor/lsq.cc (L1425)
[5]
3bdcfd6f7a/src/arch/riscv/isa.cc (L787)
Now that the TraceCPU is no longer a BaseCPU we disable CPU switching
functionality. AFAICS from the code, it seems like using m5.switchCpus
was never really working.
The takeOverFrom was described as being used when checkpointing
(which is not really the case). Moreover the icache/dcache
event loops were not checking if the CPU was switched out
so the trace was always been consumed regardless of the BaseCPU
state.
Note: IMHO the only case where you might want to switch between
an execution-driven CPU to the TraceCPU is when you want to
warm your caches before the ROI.
All other cases don't really make sense as with the TraceCPU
there is no architectural state being maintained/updated.
Change-Id: I0611359d2b833e1bc0762be72642df24a7c92b1e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This is fixing a recently reported issue [1] where it is
not possible to use the TraceCPU to replay elastic traces
It requires some architectural data structures (like ArchMMU,
ArchDecoder...) which are no longer defined in the BaseCPU class at
compilation time. Which Arch version should be used for a class
(TraceCPU) that is supposed to be ISA agnostic ? Does it really make
sense to define them for the TraceCPU? Those classes are not used anyway
during trace replay and their sole purpose would just be to comply to
the BaseCPU interface.
As there is no elegant way to make things work, this patch stops
treating the TraceCPU as a BaseCPU.
While it philosophically makes sense to treat the TraceCPU as a common
CPU (it sort of replays pre-executed instructions), a case can be made
for considering it more like a traffic generator.
[1]: https://github.com/gem5/gem5/issues/301
Change-Id: I7438169e8cc7fb6272731efb336ed2cf271c0844
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
An example case,
```python
mem_side_port = RequestPort(
"This port sends requests and " "receives responses"
)
```
This is the residue of running the python formatter.
This is done by finding all tokens matching the regex `"\s"(?![.;"])`
and manually replacing them by empty strings.
Change-Id: Icf223bbe889e5fa5749a81ef77aa6e721f38b549
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/66111
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This makes what are configuration and what are internal SCons variables
explicit and separate, and makes it unnecessary to call out what
variables to export to C++.
These variables will also be plumbed into and out of kconfiglib in later
changes.
Change-Id: Iaf5e098d7404af06285c421dbdf8ef4171b3f001
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/56892
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
::Stats became ::statistics.
"statistics" was chosen over "stats" to avoid generating
conflicts with the already existing variables (there are
way too many "stats" in the codebase), which would make
this patch even more disturbing for the users.
Change-Id: If877b12d7dac356f86e3b3d941bf7558a4fd8719
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45421
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change replaces the __attribute__ syntax with the now standard [[]]
syntax. It also reorganizes compiler.hh so that all special macros have
some explanatory text saying what they do, and each attribute which has a
standard version can use that if available and what version of c++ it's
standard in is put in a comment.
Also, the requirements as far as where you put [[]] style attributes are
a little more strict than the old school __attribute__ style. The use of
the attribute macros was updated to fit these new, more strict
requirements.
Change-Id: Iace44306a534111f1c38b9856dc9e88cd9b49d2a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35219
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These are only used in these two files, one each, and pass one dummy
argument with a default value and one extra argument with an actual
value compared to the more common constructors.
Instead, switch to constructors without those two arguments and set the
one extra value explicitly after construction.
The constructor will likely be inlined, and merged with this additional
assignment.
Change-Id: I75ca539d5ca95b57b4f4322ffa050af2031544dd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26229
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
No caller uses any of the MasterPort specific properties of these
function's return values, so we can instead return a reference to the
base Port class. This makes it possible for the data and inst ports
to be of any port type, not just gem5 style MasterPorts. This makes
life simpler for, for example, systemc based CPUs which might have TLM
ports.
It also makes it possible for any two CPUs which have compatible ports
to be switched between, as long as the ports they use support being
unbound. Unfortunately that does not include TLM or systemc ports which
are bound permanently.
Change-Id: I98fce5a16d2ef1af051238e929dd96d57a4ac838
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20240
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.
Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.
Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
With this patch a gem5 System will store more info about its Masters.
While it was previously keeping track of the Master name and Master ID
only, it is now adding a per-Master pointer to the SimObject related to
the Master.
This will make it possible for a client to query a System for a Master
using either the master's name or the master's pointer.
Change-Id: I8b97d328a65cd06f329e2cdd3679451c17d2b8f6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
This change adds a Trace CPU param to exit simulation early,
i.e. when the first (any one) trace execution is complete. With
this change the user gets a choice to configure exit as either
when the last CPU finishes (default) or first CPU finishes
replay. Configuring an early exit enables simulating and
measuring stats strictly when memory-system resources are being
stressed by all Trace CPUs.
Change-Id: I3998045fdcc5cd343e1ca92d18dd7f7ecdba8f1d
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
This change subtracts the time offset present in the trace from
all the event times when nodes and request are sent so that the
replay starts immediately when the simulation starts. This makes
the stats accurate when the time offset in traces is large, for
example when traces are generated in the middle of a workload
execution. It also solves the problem of unnecessary DRAM
refresh events that would keep occuring during the large time
offset before even a single request is replayed into the system.
Change-Id: Ie0898842615def867ffd5c219948386d952af7f7
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
This change adds a simple feature to scale the frequency of
the Trace CPU.
The compute delays in the input traces provide timing. This
change adds a freqency multiplier parameter to the Trace CPU
set to 1.0 by default. The compute delay is manipulated to
effectively achieve the frequency at which the nodes become
ready and thus scale the frequency of the Trace CPU.
Change-Id: Iaabbd57806941ad56094fcddbeb38fcee1172431
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.
This is a re-spin of 20264eb after the revert (bd1c6789) and includes
some fixes of that commit.
