Architecture states the system counter has a fixed base frequency
provided in the first entry of the frequency modes table. Optionally,
other lower frequencies may be specified in consecutive entries.
This patch adds configurable frequencies to the GenericTimer model.
The default base frequency is kept as the one that was previously
hardcoded for backwards compatibility.
The table is not recommended to be updated once the system is running.
Change-Id: Icba0b340a0eb1cbb47dfe7d7e03b547af4570c60
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22425
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch is pulling the on-chip memory outside of the on_chip_devices
list.
The external interface will be more or less the same: configuration
scripts will still use the attachOnChipIO method; a new kw argument has
been added in order to store mem_ports.
We want to provide to on-chip memory the same mechanism used when
collecting on-chip dma ports. This is needed when using Ruby, since
we need to pass a non None mem_ports to prevent the bootmem to be
wired to the bus.
Change-Id: Ifc519c3072dc5de1530772c70c80dc2094e2c54c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22000
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch is carving out a portion of VExpress_GEM5 memory for the
bootloader. Prior to this patch this was only happening
conditionally/dynamically via the setupBootLoader call. With this patch
the region is always present and the setupBootLoader doesn't instantiate
memory, it is only setting up some bootloader parameters.
Change-Id: Iaa5cdf471b14e8faa37353a25631bf7c6fc64afc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21604
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The current default base address for GICv3 ITS stated in RealView is
0x2c120000. The redistributors base address is 0x2c010000; each
instantiated core has an associated redistributor with memory region
size 0x40000 (with GICv4 extension, enabled by default). With 8 cores,
the redistributor range spans to 0x2c210000, creating a conflict with
the ITS address space.
This patch changes the ITS base address to 0x2e010000 which guarantees
no overlapping with the redistributor.
Change-Id: I7dc1af9e69ac037f85ae96f0985554f1fb8372a0
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20608
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The PCI host has an interrupt-map property which only works for a fixed
setup of parent/child interrupt/address cells, which currently overlaps
with GICv2.
We want to make this flexible, so that the interrupt-map doesn't break
if we change the interrupt/address-cells value, and the patch is aiming
in that direction. This is also needed for GICv3 DTB autogeneration,
since it is using different values than GICv2.
Change-Id: If1c661ddcbc0c277c9d6b0e44a0fd3fe2427618c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20052
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch introduces the GICv3 ITS module, which is in charge of
translating MSIs into physical (GICv3) and virtual (GICv4) LPIs. The
patch is only GICv3 compliant, which means that there is no direct
virtual LPI injection (this also means V* commands are unimplemented)
Other missing features are:
* No 2level ITS tables (only flat table supported)
* Command errors: when there is an error in the ITS, it is
IMPLEMENTATION DEFINED on how the ITS behaves. There are three possible
scenarios (see GICv3 TRM) and this implementation only supports one of
these (which is, aborting the command and jumping to the next one).
Furter patches could make it possible to select different reactions
* Invalidation commands (INV, INVALL) are only doing the memory table
walks, assuming the current Gicv3Redistributor is not caching any
configuration table entry.
Change-Id: If4ae9267ac1de7b20a04986a2af3ca3109743211
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18601
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This is needed since there is a problem in the memory layout of
VExpress_GEM5_V2 as it is: having 256KB pages is creating overlapping
regions when reserving space for 256 PEs.
GICv3 redistributors: 0x2c010000 - 0x30010000
PCI regions: 0x30000000 - 0x40000000
We fix this by cutting down the number of supported PEs to 128
Change-Id: I6e87f66a6150a441ccba298662b4548a4972dc40
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18392
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.
Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Implementation registers for the GICv2 model currently hold values
referring to a GIC-400 implementation. This patch is making them
parametrizable so that it is possible to instantiate a GIC-400 model.
The patch is also modifying Realview platform to use new GIC-400 model
in lieau of GICv2.
Change-Id: I446db8c796ee3c2708af91e9139f0a6e7947321b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15277
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This is an old platform, and we haven't had official Linux kernel configs
for it in a while, so we've decided to deprecate it.
Furthermore, trying to use it fails with:
object 'RealViewEB' has no attribute 'pci_host'
and the last commit in the class happened two years ago, which indicates
that no one has been using it.
Change-Id: Icc674b00b152eb3246e05141dbaf2624cc720f21
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12471
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
fs.py in baremetal mode currently fails for the VExpress_GEM5_V1 platform
due to inconsistent UART naming with error message:
AttributeError: object 'VExpress_GEM5_V1' has no attribute 'uart'
Consistently name keep all UARTs in the Arm platforms in a vector named
'uart' or as a single device named 'uart'. Update the configuration
scripts to reflect the fact that 'uart' can be a vector.
Change-Id: I20b8dbac794d6a9be19b6ce8c335a097872132fb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12473
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The Pl390 model has evolved and acquired a lot of the features from GICv2,
which means that the name is no longer appropriate. Rename it to GICv2
since this is more representative of the supported features.
GICv2 is backwards compatible with the older Pl390, so we decided to
simply rename the class to represent both GICv2 and older interfaces such
as the instead of creating a new separate one.
Change-Id: I1c05fba8b3cb5841c66480e9f05b8c873eba3229
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12492
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Remove default dist_addr and cpu_addr register addresses since those are
purely platform specific.
Parametrize the cpu_size parameter. RealViewPBX has the Gic CPU and
distributor base too close for the newer CPU size of 0x2000, leading to
overlap.
This was introduced in I90a9f669a46a37d79c6cc542087cf91f2044f104 and makes
using RealViewPBX fail with:
fatal: system.membus has two ports responding within range
[0x1f000100 : 0x1f0020ff]:
system.realview.gic.pio
system.realview.gic.pio
Change-Id: Ic6c0e6b3d4705ff369eb739d54a1173a47819b7d
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12491
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The GICv2 specifies that 8KiB of the memory map is allocated to the
CPU interface and 4KiB is allocated to the distributor. The current
distributor size is off by 1 and the CPU interface is completely off
by a lot.
Change-Id: I90a9f669a46a37d79c6cc542087cf91f2044f104
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11769
The platform code uses a custom mechanism to traverse the object
hierarchy when generating device trees. This is highly undesirable
since this breaks for common cases such as when SimObjects are stored
in a list.
Change-Id: I1b968e5fa1db62f1456e3c0ac3de47ab1299e58d
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10781
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Add a new VExpress_GEM5_V1_Base Platform which configures basic on
chip devices. The original VExpress_GEM5_V1 will inherit the Base and
add more on chip devices (currently only the HDLCD). This change will
make it possible to create variations of the base platform with
different devices.
Change-Id: I21f9bf4f6217d87e811ff777f630122593eef013
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10807
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Prior to this changeset the bootloader rom (instantiated as a
SimpleMemory) in ruby Arm systems was treated as an IO device and it
was fronted by a DMA controller. This changeset moves the bootloader
rom and adds it to the system as another memory with a dedicated
directory controller.
Change-Id: I094fed031cdef7f77a939d94f948d967b349b7e0
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Enables automatic generation of Device Trees for RealView PCI host
controllers. Note that some parts are more hard coded than you'd want,
but this is due to the limited understanding the PCI host has of its
configuration (i.e. it doesn't know all memory ranges). Fixing this,
for now at least, went beyond the scope and intentions of the
Device Tree generating code: use with care!
Change-Id: I2041871e0eb4d04fb5191257c47dd38649d1c0cc
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5967
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Within a device tree, the GenericTimer device needs to point (via phandle)
to a clock domain which is itself also an object in the device tree. Within
gem5, clock domains are managed by making all clocked SimObjects inherit
from ClockedObject rather than SimObject.
Without this change, the GenericTimer is unable to generate the appropriate
clock domain phandle, and will crash during DTB autogeneration.
Change-Id: I6d3fb6362847c6a01720b2f14b3d595d1e59f01f
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4960
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Recent Linux kernels for AArch64 have changed their start addresses
but we still want to relocate the kernel to 0x80080000 which
required hacking the load_addr_mask in Realview.py to be 0x7ffffff
from 0xfffffff to mask off the proper number of MSBs to load the
kernel in the desired location. To avoid having to make this change
in the future again, we auto-calculate the load_addr_mask if it is
specified as 0x0 in the System sim-object to find the most restrictive
address mask instead of having the configuration specify it. If the
configuration does specify the address mask, we use it instead of
auto-calculating.
Change-Id: I18aabb5d09945c6e3e3819c9c8036ea24b6c35cf
Signed-off-by: Geoffrey Blake <Geoffrey.Blake@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2323
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
The fixed image writer (which was dumping .bmp images only) has been
replaced by the configurable one in HDLcd device. Default format is
Auto, which gives gem5 the freedom to choose the format it prefers.
Change-Id: I0643266556bb10b43cdebd628f6daa2cd5e105dd
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5183
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The bootloader arguments were previously defaulting to a predetermined
value even if initialized elsewhere in the platform config script.
This commit fixes this issue by not calling the default initialization
routine if the bootloader is already defined.
Change-Id: Id80af4762b52dc036da29430b2795bb30970a349
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3967
Use the new fast scan-out API in the PixelPump to render frames at a
fixed frame rate in KVM mode. The refresh rate when running in KVM can
be controlled by the virt_refresh_rate parameter.
Change-Id: Ib3c78f174e3f8f4ca8a9b723c4e5d311a433b8aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2242
Reviewed-by: Rahul Thakur <rjthakur@google.com>
