The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation (and 2 of 2 spaces,
1 of 3 spaces and 2 of 12 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *enum [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>enum X ... {
by:
<indent level>enum X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^enum ([A-Za-z].*) \{$/enum \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ enum ([A-Za-z].*) \{$/ enum \1\n \{/g'
and so on.
Change-Id: Ib186cf379049098ceaec20dfe4d1edcedd5f940d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In most ISAs except MIPS and Power, this was implemented as
inst->advancePC(). It works just fine to call this function all the
time, but the idea had originally been that for ISAs which could simply
advance the PC using the PC itself, they could save the virtual function
call. Since the only ISAs which could skip the call were MIPS and Power,
and neither is at the point where that level of performance tuning
matters, this function can be collapsed with little downside.
If this turns out to be a performance bottleneck in the future, the way
the PC is managed could be revisited to see if we can factor out this
trip to the instruction object in the first place.
Change-Id: I533d1ad316e5c936466c529b7f1238a9ab87bd1c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39335
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Alex Dutu <alexandru.dutu@amd.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *class [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>class X ... {
by:
<indent level>class X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^class ([A-Za-z].*) \{$/class \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ class ([A-Za-z].*) \{$/ class \1\n \{/g'
and so on.
Change-Id: I17615ce16a333d69867b27c7bae0f4fdafd8b2eb
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39015
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There is no way to make this sort of template work with more than one
ISA at a time, and it's also more complex than it needs to be,
particularly since the methods within it are never used in performance
critical code. Using virtual functions is also simpler and uses less
code.
Change-Id: I0baa1a651fa656420f6f90776572f8700a6d7cab
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40106
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These currently only hold the number of registers in a particular class,
but can be extended in the future to hold other information about each
class. The ISA class holds a vector of descriptors which other parts of
gem5 can retrieve to set up storage for each class, etc.
Currently, the RegClass enum is used to explicitly index into the vector
of descriptors to get information about a particular class. Once enough
information is stored in the descriptors, the other parts of gem5 should
be able to set up for each register class generically, and the ISAs will
be able to leave out or create new register classes without having to
set up global plumbing for it.
The more immediate benefit is that this should (mostly) parameterize
away the ISA register constants to break another TheISA style
dependency. Currently a global set of descriptors are set up in the
BaseISA class using the old TheISA constants, but it should be easy to
break those out and make the ISAs set up their own descriptors. That
will bring arch/registers.hh significantly closer to being eliminated.
Change-Id: I6d6d1256288f880391246b71045482a4a03c4198
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41733
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Override ParseParam<>::parse and ShowParam<>::parse directly. This will
allow using a different format for serializing and displaying registers.
Also get rid of the print() methods. When any cprintf based mechanism is
used (like DPRINTF), the underlying mechanism will use << to output the
value. Since we already override <<, there's no reason to wrap that in a
method which calls csprintf which calls << anyway.
Change-Id: Id65b9a657507f2f2cdf9673fd961cfeb0590f48c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41994
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
The only way to allocate fixed sized arrays which will definitely be big
enough for all source/destination registers for a given instruction is
to track the maximum number of each at compile time, and then size the
arrays appropriately. That creates a point of centralization which
prevents breaking up decoder and instruction definitions into more
modular pieces, and if multiple ISAs are ever built at once, would
require coordination between all ISAs, and wasting memory for most of
them.
The dynamic allocation overhead is minimized by allocating the storage
for all variable arrays in one chunk, and then placing the arrays there
using placement new. There is still some overhead, although less than it
might be otherwise.
Change-Id: Id2c42869cba944deb97da01ca9e0e70186e22532
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38384
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This was mostly not used to begin with, but also when it was used, it
would obscure places where there were types, functions, etc, which were
switched between ISAs at compile time, and which would need to be
cleaned up to allow more than one ISA at a time.
Change-Id: Ieb372feff91b7e946b477fb78e54bcd0c2138966
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39655
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This class had been trying to keep all indices within the modulus of the
queue size, and to use all elements in the underlying storage by making
the empty and full conditions alias, differentiated by a bool. To keep
track of the difference between a storage location on one trip around
the queue vs other times around, ie an alias once the indices had
wrapped, it also keep track of a "round" value in both the queue itself,
and any iterators it created.
All this bookkeeping significantly complicated the data structure.
Instead, this change modifies it to keep track of a monotonically
increasing index which is wrapped at the time it's used. Only the head
index and current size need to be tracked in the queue itself, and only
a pointer to the queue and an index need to be tracked in the iterators.
Theoretically, it's possible that this value could overflow eventually
since it increases forever, unlike before where the index wrapped and
was never larger than the queue's capacity. In practice, the type of the
index was changed from a uint32_t to a size_t, probably a 64 bit value
in modern systems, which will hold much larger values. Also, the round
counter and the index values together acted like a smaller than 64 bit
value anyway, since the round counter would overflow after 2^32 times
around a less than 2^32 entry queue.
One minor interface difference is that the head() and tail() values
returned by the queue are no longer pre-wrapped to be modulo the queue's
capacity. As long as consumers don't try to be overly clever and feed in
fixed values, do their own bounds checking, etc., something that would
be cumbersome considering the wrapping nature of the structure, this
shouldn't be an issue.
Also, since external consumers no longer need to worry about wrapping,
since only one of them was used in only one place, and because they
weren't even marked as part of the interface, the modulo helper
functions have been eliminated from the queue. If other code wants to
perform modulo arithmetic for some reason (which the queue no longer
requires) they can accomplish basically the same thing in basically the
same amount of code using normal math.
Also, rather than inherit from std::vector, this change makes the vector
internal to the queue. That prevents methods of the vector that aren't
aware of the circular nature of the structure from leaking out if
they're not overridden or otherwise proactively blocked.
On top of simplifying the implementation, this also makes it perform
*slightly* better. To measure that, I ran the following command:
$ time build/ARM/base/circular_queue.test.opt --gtest_repeat=100000 > /dev/null
and found a few percent improvement in total run time. While this
difference was small and not measured against realistic usage of the
data structure, it was still measurable, and at minimum doesn't seem to
have hurt performance.
Change-Id: Ic2baa28de135be7086fa94579bbec451d69b3b15
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38478
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
On the O3 CPU, when the number of threads on the CPU (SMT) is too low to
hold all the old style CPU workload items, then it would increase the
number of threads to match. There are three problems with this.
1. This behavior was only implemented on O3.
2. It could silently hide a bug in the config where the number of
workload items was accidentally too big.
3. It makes the DerivO3CPUParams struct tamper with itself in the
create() method, which means not even config.ini will accurately
reflect the actual config of the system.
Change-Id: I0aab70d4b98093f7f14156ca437e763f031049ab
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35937
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Currently, when the numThreads parameter is set to something larger than
1 in full system mode, the O3 CPU will just silently change it back down
again to 1. This could be confusing to the user since it won't be
immediately apparent, even when looking at config.ini, that their config
isn't being respected.
This change moves that check into the CPU constructor, where CPU
behavior probably should be rather than the create() method which should
just build the object, and also turns it into an error.
Change-Id: I627ff8702b5e8aaad8839aa8d52524690be25619
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35936
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The fetch policy is only meaningful for SMT simulations. The
"SingleThreaded" value is a placeholder which is the default, and is
only supposed to be used in non-SMT simulations.
Rather than have this enum value and have special checks for it in
various places in O3, we can just eliminate it and set the default,
which is still only meaningful in SMT simulations, be an SMT fetch
policy.
The DerivO3CPUParams::create() function would forcefully change the
the fetch policy from "SingleThreaded" to "RoundRobin" anyway if there
were more than one thread, so that can be the actual default instead of
the shadow effective default.
Change-Id: I458fda00b5bcc246b0957e6c937eab0c5b4563c3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35935
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The byteEnable variable is used for masking bytes in a memory request.
The default behaviour is to provide from the ExecContext to the CPU
(and then to the LSQ) an empty vector, which is the same as providing
a vector where every element is true.
Such vectors basically mean: do not mask any byte in the memory request.
This behaviour adds more complexity to the downstream LSQs, which now
have to distinguish between an empty and non-empty byteEnable.
This patch is simplifying things by transforming an empty vector into
a all true one, making sure the CPUs are always receiving a non empty
byteEnable.
JIRA: https://gem5.atlassian.net/browse/GEM5-196
Change-Id: I1d1cecd86ed64c53a314ed700f28810d76c195c3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23285
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>
Commits 02745afd and f9b4e32 introduced a mechanism for creating checkpoint
objects for hardware transactional memory (HTM) and Arm TME. Because the
checkpoint object also contains the local UID of a transaction, it is
needed before any architectural checkpointing takes places. This caused
segfaults when running HTM codes.
This commit allows ISAs to allocate a checkpoint once at the beginning
of simulation. In order to do that we need to remove the validity check
assertion; the cpt will become valid only after a first successfull
transaction start
Change-Id: I233d01805f8ab655131ed8cd6404950a2bf6fbc7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35015
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change replaces the __attribute__ syntax with the now standard [[]]
syntax. It also reorganizes compiler.hh so that all special macros have
some explanatory text saying what they do, and each attribute which has a
standard version can use that if available and what version of c++ it's
standard in is put in a comment.
Also, the requirements as far as where you put [[]] style attributes are
a little more strict than the old school __attribute__ style. The use of
the attribute macros was updated to fit these new, more strict
requirements.
Change-Id: Iace44306a534111f1c38b9856dc9e88cd9b49d2a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35219
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
System calls should now be requested from the workload directly and not
routed through ExecContext or ThreadContext interfaces. That removes a
major special case for SE mode from those interfaces.
For now, when the SE workload gets a request for a system call, it
dispatches it to the appropriate Process object. In the future, the
ISA specific Workload subclasses will be responsible for handling system
calls and not the Process classes.
For simplicity, the Workload syscall() method is defined in the base
class but will panic everywhere except when SEWorkload overrides it. In
the future, this mechanism will turn into a way to request generic
services from the workload which are not necessarily system calls. For
instance, it could be a way to request handling of a page fault without
having to have another PseudoInst just for that purpose.
Change-Id: I18d36d64c54adf4f4f17a62e7e006ff2fc0b22f1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33282
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There were three different StaticInst flags for memory barriers,
IsMemBarrier, IsReadBarrier, and IsWriteBarrier. IsReadBarrier was never
used, and IsMemBarrier was for both loads and stores, so a composite of
IsReadBarrier and IsWriteBarrier.
This change gets rid of IsMemBarrier and replaces by setting
IsReadBarrier and IsWriteBarrier at the same time. An isMemBarrier
accessor is left, but is now implemented by checking if both of the
other flags are set, and renamed to isFullMemBarrier to make it clear
that it's checking both for both types of barrier, not one or the other.
Change-Id: I702633a047f4777be4b180b42d62438ca69f52ea
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33743
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This was set by MIPS in two places, I think largely just because it was
available. This flag refers to IPRs which are an Alpha concept. In the
O3 CPU, IsIprAccess was used as a possible indicator to determine if an
instruction IsSerializeBefore, but we've already got a flag for that. In
the minor CPU, which hasn't been made to work with MIPS as far as I
know, it was used in a condition but not mentioned in the comment
alongside the condition. I think there it was added for the sake of
Alpha.
This change eliminates that flag and removes it from the O3 and minor
CPUs. In the MIPS ISA description, the instructions that were marked as
IsIprAccess have now been marked as IsSerializeBefore since, if there
was a real reason for them to be marked as IsIprAccess, it would have
been to get it them to work in O3, and there IsSerializeBefore gets
equivalent behavior.
Change-Id: Ia874cde12fa70b998d3e638458f13d69798d40b7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33739
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
