Only one is set up corrent, the one passed in from the constructor.
Others can be added with addThreadContext.
The inconsistency of adding one ThreadContext through the constructor
and others through addThreadContext isn't great, but this way we can
ensure that there is always at least one ThreadContext. I'm not sure
what the GDB stub should do if there aren't any threads. I don't think
that the protocol can actually handle that, judging from the
documentation I can find.
Change-Id: I9160c3701ce78dcbbe99de1a6fe2a13e7e69404e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44611
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Just because the current methods of the base class only call
Event::trace from within DTRACE(Event), that's no guarantee that future
methods will, that the call sites won't be changed so that they don't,
or any number of subclasses that may not even exist today will.
Instead, we should incur the very slight overhead of checking the
Debug::Event variable again to ensure expected behavior, and to avoid
unnecessary complexity for a very small optimization when we're already
enabled a high overhead behavior like tracing for all events in a
virtual function.
Change-Id: I1c360b2ba73ad73c0658e85e9122f1fef07f93ce
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44986
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
GPU MTYPE is currently set using a global config passed to the
PACoalescer. This patch enables MTYPE to be set by the shader on a
per-request bases. In real hardware, the MTYPE is extracted from a
GPUVM PTE during address translation. However, our current simulator
only models x86 page tables which do not have the appropriate bits for
GPU MTYPES. Rather than hacking non-x86 bits into our x86 page table
models, this patch instead keeps an interval tree of all pages that
request custom MTYPES in the driver itself. This is currently
only used to map host pages to the GPU as uncacheable, but is easily
extensible to other MTYPES.
Change-Id: I7daab0ffae42084b9131a67c85cd0aa4bbbfc8d6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42216
Maintainer: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
When a segfault happens in the guest, report a SEGV trap to GDB (if
there is one attached) instead of bailing out immediately.
The obvious use-case for this, is the ability to debug guest crashes
in GDB in the standard manner.
The less-trivial use-case is for development of software in an
incomplete software stack (cf. Aarno-Engblom's "Virtual Platforms"
pp.105 et seq.) One particular example is Ingalls-Miranda simulation of
JIT compilers, where the VM's address space may be split between the
simulated and the real machine: in this case, GDB traps facilitate the
transparent illusion of an unbroken address space.
Change-Id: I9072ed5f6474e05e9a99dc42ae5754be28121355
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44685
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The code which registers thread contexts originally returned the ID that
it had chosen, and let the CPU actually set the ID in the object itself.
That opened a window where calling contextId() on the ThreadContext
would return the wrong answer.
Instead, we can just set the ID immediately after it's decided. This
also localizes that logic and removes plumbing for the ID between that
decision and where it's actually applied.
Change-Id: I31ad84c3f9bf6f5b6f72457ca640ea929b24f6a0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44615
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
The nullStaticInstPtr was low overhead, but the nopStaticInstPtr needed
an actual StaticInst implementation it could point to, and that brought
with it some (minor) additional dependencies. Specifically, the
implementation of advancePC needs the definition of TheISA::PCState,
while all other signatures/impementations in StaticInst are already
passing around that type by reference or could be made to, reducing
dependencies further.
Change-Id: I9ac6a6e5a3106858ea1fc727648f61dc39738a59
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42968
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This has two purposes. First, SCons assumes that once you call
Configure, you won't set up the environment the Configure is based on
until after you get the environment back from it again with
conf.Finish(). We get away with this when the cache mode for config
tests is not "force", since Configure just reuses the environment we
pass in, and any changes we make are immediately communicated between
the two.
If the cache mode *is* "force" though, SCons modifies the decider so
that everything the conf environment goes to build looks like it's out
of date. It does that by cloning the original environment, and then
using that clone to do its tests. That causes a problem because we have
a long lived "conf" object and make further changes to main, and since
the two environments are now separate the one in conf doesn't see those
updates.
Second, and more subtly, we export our "main" and "env" environments so
that other SConsopts and SConscript files can use them and define things
in them. The way Configure is designed, if the config caching mode is
"force", then it will create a new environment, and then that
environment will replace what the, for instance, "main" variable points
to when "main = conf.Finish()" is executed.
Unfortunately, if we've already Export()-ed main, we've exported what
the "main" variable pointed to at that time. Our view of "main" will
track with the value that conf.Finish() returned, but since that
construction environment is mearly derived from the main we Exported and
not actually the same thing, they have diverged at that point and will
behave independently.
To solve both of these problems, this change modifies the
gem5_scons.Configure() method so that it's a context manager instead of
a regular function. As before, it will call Configure for us and create
a configuration context, which it will yield as the "with" value. When
the context exits, all the variables in the context Finish() returns
will be shoved back into the original context with Replace(). This isn't
perfect since variables which were deleted in the environment (probably
very rare in practice) will not exist and so will not overwrite the
still existent variable in the original dict.
This has several advantages. The environment never splits into two
copies which continue on independently. It makes the lifetime of a
configuration context short, which is good because behavior during that
time is tricky and unintuitive. It also makes the scope of the context
very clear, so that you won't miss the fact that you're in a special
setting and need to pay attention to what environment you're modifying.
Also, this keeps the conceptual overhead of configuration localized to
where the configuration is happening. In parts of the SConscripts which
are not doing anything with conf, etc, they don't have to modify their
behavior since no configuration context is active.
This change is based on this change from Hanhwi Jang who identified this
problem and proposed an initial solution:
https://gem5-review.googlesource.com/c/public/gem5/+/44265
Change-Id: Iae0a292d6b375c5da98619f31392ca1de6216fcd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44389
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Hanhwi Jang <jang.hanhwi@gmail.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
These were not caught by the previous patches because
the grep used ignored:
- anonymous structures
(e.g., "struct {")
- opening braces without leading spaces
(e.g., "struct Name{"),
- weird chars in auto-generation files
(e.g., "struct $name {").
- extra characters after the opening brace.
(e.g., "struct Name { // Comment")
- typedefs (note that this is not caught by the verifier)
(e.g., "typedef struct Name {")
Most of this has been fixed be grepping structures
with the following regex:
grep -nrE --exclude-dir=systemc \
"^ *(typedef)* *(struct|class|enum|union) [^{]*{$" src/
The following makes sure that "struct{" is captured:
grep -nrE --exclude-dir=systemc \
"^ *(struct|class|enum|union){" src/
To find cases that contain a comment after the
opening brace:
grep -nrE --exclude-dir=systemc \
"^ *(struct|class|enum|union)[^{]*{\s*//" src/
Change-Id: I9f822bed628d13b1a09ccd6059373aff63a8d7bd
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43505
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Use SConsopts files local to individual domains to pull
non-foundational build code out of SConstruct. This greatly simplifies
SConstruct, and also makes it easier to find build configuration having
to do with particular pieces of gem5.
This change also converts some python level variables, all_protocols,
protocol_dirs, and slicc_includes, into the environment where the timing
of their initialization is more flexible.
Change-Id: Ie61ceb75ae9e5557cc400603c972a9582e99c1ea
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40872
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
This unused pair of methods could be used to trigger a breakpoint within
the remote GDB stub, but was unused and would need to be called from an
instance of GDB attached to gem5 itself.
The system's version of breakpoint was also limitted in that it would
only cause a breakpoint in the first thread's GDB and no other.
Change-Id: I53ceab78667610177dbb8be1def3a88262befeec
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44031
Reviewed-by: Boris Shingarov <shingarov@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The only thing left in isa_traits.hh are two constants, one for the
number of bytes in a page, and one for how far to shift an address to
get the page number. To make it clear that this is the only thing
isa_traits.hh should be used for from this point forward (until it is
entirely eliminated), this change renames it to the much less generic
page_size.hh.
Also, because isa_traits.hh used to have *much* more stuff in it, it was
included in a lot of places it didn't need to be. This change also
clears out all these legacy includes while updating the actually needed
ones to the new name.
Change-Id: I939b01b117c53d620b6b0a98982f6f21dc2ada72
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40179
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *union [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>union X ... {
by:
<indent level>union X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^union [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^union ([A-Za-z].*) \{$/union \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ union [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ union ([A-Za-z].*) \{$/ union \1\n \{/g'
and so on.
Change-Id: I066854eb27a8acd2cc2dfa41596bb1b1f66c71b1
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43328
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation (and 2 of 2 spaces,
1 of 3 spaces and 2 of 12 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *enum [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>enum X ... {
by:
<indent level>enum X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^enum ([A-Za-z].*) \{$/enum \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ enum ([A-Za-z].*) \{$/ enum \1\n \{/g'
and so on.
Change-Id: Ib186cf379049098ceaec20dfe4d1edcedd5f940d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *class [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>class X ... {
by:
<indent level>class X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^class ([A-Za-z].*) \{$/class \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ class ([A-Za-z].*) \{$/ class \1\n \{/g'
and so on.
Change-Id: I17615ce16a333d69867b27c7bae0f4fdafd8b2eb
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39015
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In fs simulation, the kernel is loaded to physical address first and
then it would relocate itself to virtual address. The address which
using by kernel symbol table is virtual address. To debug the process
before kernel relocated to virutal memory, we need another copy of
symbol table for physical address.
Change-Id: I38107ff94b301df1a5170dd98774df88cfb02298
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43104
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Instead of using recursively applied templates to accumulate a series of
wrapper lambdas which dispatch to a call, use pure parameter pack
expansion. This has two benefits. One, it makes the code simpler(ish) and
easier to understand. The parameter pack machinery is still intrinsically
fairly tricky, but there's less of it and it's a fairly straightforward
application of that mechanism.
Also, a nice side benefit is that the template for simcall dispatch will
expand to a small fixed number of functions which do all their work
locally, instead of having a new function for each layer of the onion,
one per parameter, and no calls through lambdas. That should hopefully
make debugging easier, and produce less bookkeeping overhead as far as
really long names, lots of functions, etc.
This code, specifically the code in dispatch.hh, can be simplified even
further in the future once we start using c++17 which is if constexpr,
and std::apply which explodes a tuple and uses its components as
arguments to a function, something I'm doing manually here.
Change-Id: If7c9234cc1014101211474c2ec20362702cf78c2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41600
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
When requestor id is requested, it is stripped of the System name via
the `stripSystemName` function in `system.cc`. However, there is a bug
in this code that leaves a leading ".". E.g.:
`system.cpu.mmu.dtb.walker` is stripped to `.cpu.mmu.dtb.walker`.
This patch fixes this issue.
Change-Id: I825cbc60c7f7eaa84c8a0150c30e9f2902cff6cb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41513
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
The patch is using the newly defined PARAMS macro to replace
custom params() getters in derived class.
The patch is also removing redundant _params:
Instead of creating yet another _params field, SimObject descendants
should use params() to expose the real type of SimObject::_params they
already have.
Change-Id: I43394cebb9661fe747bdbb332236f0f0181b3dba
Signed-off-by: Alexander Klimov <Alexander.Klimov@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39900
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The mismatches were from places where Params structs had been declared
as classes instead of structs, and ruby's MachineID struct.
A comment describing why the warning had been disabled said that it was
because of libstdc++ version 4.8. As far as I can tell, that version is
old enough to be outside the window we support, and so that should no
longer be a problem. It looks like the oldest version of gcc we
support, 5.0, corresponds with approximately libstdc++ version 6.0.21.
https://gcc.gnu.org/onlinedocs/libstdc++/manual/abi.html#abi.versioning
Change-Id: I75ad92f3723a1883bd47e3919c5572a353344047
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40953
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The idea of this template was to distinguish types which should
grow/shrink based on the native size of the ABI in question. Or in other
words, if the ABI was 32 bit, the type should also be 32 bit, or 64 bit
and 64 bit.
Unfortunately, I had intended for Addr to be a conforming type (since
local pointers would be conforming), but uint64_t not to be. Since Addr
is defined as a typedef of uint64_t, the compiler would make *both*
types conforming, giving incorrect behavior on 32 bit systems.
Local pointers will need to be handled in a different way, likely with
the VPtr template, so that they will be treated correctly and not like
an explicitly 64 bit data type.
Change-Id: Idfdd5351260b48bb531a1926b93e0478a297826d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40495
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The default type for VPtr is now void, and the void partial
specialization of VPtr is basically just a fancy container for Addr. Its
purpose is to distinguish guest addresses from actual uint64_t-s in the
signature of simcalls so that types which are purposefully 64 bits will
stay that way, and addresses will scale to the size of pointers in the
target ABI.
Change-Id: I71e2201f5917005861ba678c6675dbcbaa0965b3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40497
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
This type is primarily used to determine the size of a pointer when
using that ABI, similar to the uintptr_t type, but also less directly
to determine the "native" size of the ABI. For instance, for 32 bit ARM
ABIs, it should be defined as uint32_t since that's both the size of a
uintptr_t, and, less directly, the size of a 32 bit ARM register and
"naturally" sized types in that ABI.
This type can be used by the VPtr template to retrieve its actual value
from a simcall's parameters. In general, when accepting or returning a
pointer or address in a simcall, the VPtr template should be used so
that it's managed correctly by GuestABI. Addr will be treated as a
uint64_t allways which will be incorrect for 32 bit ABIs.
Change-Id: I3af046917387541d6faff96a21a1f1dbf7317e06
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40496
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
This should help reduce warning spew when building with newer compilers.
The pybind11::module type has been renamed pybind11::module_ to avoid
conflicts with c++20 modules, according to the pybind11 changelog, so
this CL also updates gem5 source to use the new type. There is
supposedly an alias pybind11::module which is for compatibility, but we
still get linker errors without changing to pybind11::module_.
Change-Id: I0acb36215b33e3a713866baec43f5af630c356ee
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40255
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Event creation and management support from emulated drivers is required
to support interruptible signals in HSA and this support was not
available. This changeset adds the event creation and management support
in the emulated driver. With this patch, each interruptible signal
created by the HSA runtime is associated with a signal event. The HSA
runtime can then put a thread waiting on a signal condition to sleep
asking the driver to monitor the event associated with that signal. If
the signal is modified by the GPU, the dispatcher notifies the driver
about signal value change. If the modifier is a CPU thread, the thread
will have to make HSA API calls to modify the signal and these API calls
will notify the driver about signal value change. Once the driver is
notified about a change in the signal value, the driver checks to see if
any thread is sleeping on that signal and wake up the sleeping thread
associated with that event. The driver has also implemented the time_out
wakeup that can wake up the thread after a certain time period has
expired. This is also true for barrier packets.
Each signal has an event address in a kernel managed and allocated
event page that can be used as a mailbox pointer to notify an event.
However, this feature used by non-CPU agents to communicate with the
driver is not implemented by this changeset because the non-CPU HSA
agents in our model can directly communicate with driver in our
implementation. Having said that, adding that feature should be trivial
because the event address and event pages are correctly setup by this
changeset and just adding the event page's virtual address to our PIO
doorbell interface in the page tables and registering that pio address
to the driver should be sufficient. Managing mailbox pointer for an
event is based on event ID and using this event ID as an index into
event page, this changeset already provides a unique mailbox pointer for
each event.
Change-Id: Ic62794076ddd47526b1f952fdb4c1bad632bdd2e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38335
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The base/refcnt.hh header was not used in base/types.hh at all, and
enum/ByteOrder.hh was there just so other files could find it. Instead,
this change moves enum/Byteorder.hh to sim/byteswap.hh where it's fits
with the purpose of the header.
This change also fixes some style problems with the code in
base/types.hh itself.
Change-Id: I471ae5cb2cca9169ba8616fb8411b40108a3ffb2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39855
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
