The current code to merge translation entries from stage 1 and stage 2
doesn't handle cases where the page sizes at the different stages
differ. This change fixes both the case when the hypervisor has a
larger page size and when it has a smaller page size.
Change-Id: Icdf289005bf1e4de4d91d54643924a38d9d77796
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10505
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
In the Arm ISA there are some sys reg numbers which are reserved for
implementation defined registers. The default behaviour is to to treat
them as unimplemented registers. It is now possible to change this
behaviour at runtime and treat them as NOP. In this way an access to
those register won't make simulation fail.
Change-Id: I0d108299a6d5aa81fcdabdaef04eafe46df92343
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10504
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
In the AArch64 ISA, S3_<op1>_<Cn>_<Cm>_<op2> refers to a pool
of implementation defined registers, provided that reg numbers
are in the following range:
<op1> is in the range 0 - 7
<CRn> can take the values 11, 15
<CRm> is in the range 0 - 15
<op2> is in the range 0 - 7
Change-Id: I7edd013e5cea4887f5e4c5a81f4835b7de93bd50
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10501
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch implements the ARMv8.1 TTBR1_EL2 register, which is used for
getting the translation table base address when a Host Operating System
is running at EL2. (HCR_EL2.E2H = 1)
Change-Id: Ic0ab351cae3fd64855eda7c18c8757da0d7b8663
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10382
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch adds the EL2 Host bit to the HCR_EL2 register. Enables a
configuration where a Host Operating System is running in EL2, and the
Host Operating System's applications are running in EL0.
Change-Id: I92d21ed9f8958c58f135dca1b6a97460ba4c02f9
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10381
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The Arm Semihosting layer currently assumes that the guest application
shares STDIO with gem5. This makes it hard to distinguish application
output from gem5's output and makes it impossible to redirect STDIN
when running in interactive mode. Add support for custom STDIO
redirection when instantiating the Semihosting model.
Change-Id: I3411a6b9bfb008ffc3087d8837f59be72bd1e8ae
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10021
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
With this patch a gem5 System will store more info about its Masters.
While it was previously keeping track of the Master name and Master ID
only, it is now adding a per-Master pointer to the SimObject related to
the Master.
This will make it possible for a client to query a System for a Master
using either the master's name or the master's pointer.
Change-Id: I8b97d328a65cd06f329e2cdd3679451c17d2b8f6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
This patch changes the fault being thrown when MSR/MRS to an unknown
Misc register in AArch64. While previously the instruction was decoded
as an Unknown instruction (hence not printing any information), it is
now decoded as a FailUnimplemented and the unrecognized System register
numbers (CRn, op0...) are printed.
Change-Id: I205ff7adcde5934231c77e8d2250db69a34581fc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10061
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Some bits in CPACR_EL1 are RES0 but not RAZ/WI. For instance, bit
CPACR_EL1[31] is RES0 but should be made stateful, since it allows
programing of CPACR.ASEDIS. Therefore the masking of CPACR_EL1
is removed.
Change-Id: If1fa3fa1e06bc38495b8afce2c635f3ddf76ce32
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10046
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch fixes the masking of cp10 and cp11 in CPACR according to
NSACR.cp10 / NSACR.cp11 by adding the condition "in Non-secure state,
if EL3 is implemented and is using AArch32...", which is specified in
ARM ARM.
Change-Id: Id00e7bf04d6a985e27dbf1028677da0746b79924
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10044
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
When EL3 is not implemented or it is running on AArch64, Secure banking
does not apply and there is only one flatten register version. In this
scenario gem5 is using the _NS (Non-secure) version as a default backing
storage location: secure mode software must be able to access the
non-secure register.
Change-Id: I5086e6228a5cba4d18c632543a2bcf80ffb069a8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9941
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch introduces the TarmacTracer: an instruction tracer which
allows to dump a gem5 execution trace in Tarmac format [1]. The new
tracer is supporting either Tarmac and TarmacV8 format specifications.
Not every traceable information has been implemented:
Implemented Trace Type:
Instruction Trace
Register Trace
Processor Memory Access Trace
Unimplemented Trace Type:
Program Flow Trace
Event Trace
Memory Bus Trace
[1]: https://developer.arm.com/docs/dui0845/f/tarmac-trace-file-format
Change-Id: I8799d8e5852e868673f728971db3fe8c63961f5e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9382
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
A new InstTracer (TarmacParser) has been implemented. This tracer is
parsing a pre-existing Tarmac trace file [1] while gem5 is running; it
is comparing execution data together with trace data and it is dumping
differences.
This allows to use Tarmac format as a glue between heterogeneous
simuators speaking the same Tarmac language.
Kudos to Giacomo Gabrielli for writing the original tracer.
[1]: https://developer.arm.com/docs/dui0845/f/tarmac-trace-file-format
Change-Id: I9b92204a149813166166adba4a7c61a248bdcac3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9381
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
MiscRegisters are not banked between secure and non-secure mode if EL3
is not implemented or if EL3 is using AArch64 (highestELIs64). In this
scenario a unique register is used and it is mapped to the NS version
(see snsBankedIndex implementation), so that a secure world read/write
should access the non secure storage.
Change-Id: Ica4182e3cdf4021d2bd1db23e477ce2bbf055926
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9502
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Clang has started(?) reporting override related warnings, something gcc
apparently did before, but was disabled in the SConstruct. Rather than
disable the warnings in for clang as well, this change fixes the
warnings. A future change will re-enable the warnings for gcc.
Change-Id: I3cc79e45749b2ae0f9bebb1acadc56a3d3a942da
Reviewed-on: https://gem5-review.googlesource.com/9343
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
This function takes a pointer to a buffer and the current size of the
buffer as a pass by reference argument. If the size of the buffer is
sufficient, the function stores a binary representation of itself
(generally the ISA defined instruction encoding) in the buffer, and
sets the size argument to how much space it used. This could be used
by ISAs which have two instruction sizes (ARM and thumb, for example).
If the buffer size isn't sufficient, then the size parameter should be
set to what size is required, and then the function should return
without modifying the buffer.
The buffer itself should be aligned to the same standard as memory
returned by new, specifically "The pointer returned shall be suitably
aligned so that it can be converted to a pointer of any complete object
type and then used to access the object or array in the storage
allocated...". This will avoid having to memcpy buffers to avoid
unaligned accesses.
To standardize the representation of the data, it should be stored in
the buffer as little endian. Since most hosts (including ARM and x86
hosts) will be little endian, this will almost always be a no-op.
Change-Id: I2f31aa0b4f9c0126b44f47a881c2901243279bd6
Reviewed-on: https://gem5-review.googlesource.com/7562
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
TLBI broadcasting was the default implementation of most of TLBI
instructions. This patch applies the broadcasting behaviour only to the
Inner-Shareable subset, while simpler TLB invalidation instructions only
affect the PE that executes them.
Change-Id: Idb01d0d4f593131f657e8fc9668112de8e4ccdcb
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9182
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
gcc 7 onwards have additional heuristics to detect implicit
fallthroughs and it fails the build with warnings for ARM as a result.
There was one gcc bug[1] that I fixed but the rest are cases that gcc
cannot detect due to the point at which it does the fallthrough check.
Most of this patch adds __builtin_unreachable() hints in places that throw
this warning to indicate to gcc that the fallthrough will never
happen.
The remaining cases are actually possible fallthroughs due to
incorrect code running on the simulator; in which case an Unknown
instruction is returned.
[1] https://gcc.gnu.org/ml/gcc-patches/2018-02/msg01105.html
Change-Id: I1baa9fa0ed15181c10c755c0bd777f88b607c158
Signed-off-by: Siddhesh Poyarekar <siddhesh.poyarekar@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/8541
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
GCC 7 generates maybe-uninitialized warnings at the code that updates
the "dest" variables in the writeVecElem function of neon64_mem.hh file.
It is because the generated code does not appropriately initialize the
output variable before passing it to the writeVecElem function. This
patch initializes the output variable to fix this.
Change-Id: I50a8f4e456ccdcaa3db1392ec097017450c56ecb
Signed-off-by: Chun-Chen Hsu <chunchenhsu@google.com>
Reviewed-on: https://gem5-review.googlesource.com/9121
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch introduces the TLB IPA-Based invalidating instructions in
aarch32. In the entry selection policy the level of translation is not
taken into account.
This means that no difference stands between (e.g.) TLBIIPAS2 and
TLBIPAS2L.
Change-Id: Ieeb54665480874d2041056f356d86448c45043cb
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8822
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
In the pool of TLB Invalidate system register a category of instruction
was missing: the ones operating on entries added to the TLB during the
last level only of a table walk. (E.g. TLBIVMAL). This patch is not
considering this matching criteria when invalidating the entries and it
is rather performing the invalidation on all levels.
Change-Id: I5f2186cfdd73793e76c90b260f7128be187903fe
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8821
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The fault status code generated by a Prefetch/Data Fault was containing
a wrong value when the fault was triggered in aarch32 but handled in
aarch64. This because the encoding differs between the two ISAs and the
encoder was just checking the starting ISA rather than the the ending
one. In this case the getFsr must be called after we know which is the
ending ISA, which happens only after ArmFault::invoke gets called. The
fsc update hence happens before writing into the Syndrome register.
Change-Id: I725f12b6dcc0178f608233bd3d15e466d1cd1ffc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8362
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
There is a set of internal variables in ArmFault thats get updated once
the fault is invoked (ArmFault::invoke). Sometimes we rely on those even
if the fault is generated but not invoked (e.g. when checking if a
memory access is producing a fault). This patch is moving the update
functionalities inside a public method so that a client can make use of
it even when not invoking the fault.
Change-Id: I3ac5b6835023f28ec569fe25487dffa356e1b2fd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8361
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The HLT instruction is used to trap into semihosting. The semihosting
code can change the contents of memory behind the back of the CPU,
which requires instructions triggering semihosting to be
non-speculative and memory barriers.
Change-Id: I735166251aa194120ad49c08082d4ac65fe96524
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8373
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
