The only thing left in isa_traits.hh are two constants, one for the
number of bytes in a page, and one for how far to shift an address to
get the page number. To make it clear that this is the only thing
isa_traits.hh should be used for from this point forward (until it is
entirely eliminated), this change renames it to the much less generic
page_size.hh.
Also, because isa_traits.hh used to have *much* more stuff in it, it was
included in a lot of places it didn't need to be. This change also
clears out all these legacy includes while updating the actually needed
ones to the new name.
Change-Id: I939b01b117c53d620b6b0a98982f6f21dc2ada72
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40179
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The BUILD_GPU setting was being set by adding a -D to the command line
at the top level SConstruct. Instead, add BUILD_GPU to export_vars so
that it ends up in a config/build_gpu.hh header. Also switch it from the
fairly dangerous #ifdef style to the safer #if.
Change-Id: Ic93d37c9d7671023a6978842dbb2750c3e92f8d8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40873
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This vestigial device provides a thin layer of indirection between
devices and the CPUs in a system. It's basically a collection of helper
functions, but since it's a SimObject it needs to be instantiated in
python and added to configurations.
Change-Id: I029d2314ae0bb890678e1e68dafcdab4bfe49beb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43347
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
dGPUs in all versions of ROCm and APUs starting with ROCM 2.2 can
under-allocate scratch resources. This patch adds support for
the CP to trigger a recoverable error so that the host can attempt to
re-allocate scratch to satisfy the currently stalled kernel.
Note that this patch does not include a mechanism to handle dynamic
scratch allocation for queues with in-flight kernels, as these queues
would first need to be drained and descheduled, which would require some
additional effort in the hsaPP and HW queue scheduler. If the CP
encounters this scenerio it will assert. I suspect this is not a
particularly common occurence in most of our applications so it is left
as a TODO.
This patch also fixes a few memory leaks and updates the old DMA callback
object interface to use a much cleaner c++11 lambda interface.
Change-Id: Ica8a5fc88888283415507544d6cc49fa748fe84d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42201
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
In the HSAQueueDescriptor ptr function, we mod the index by numElts, but
numElts was previously just set to size, which was the raw size of the
queue. This lead to indexing past the queue. We fix this by dividing by
the size by the AQL packet size to get the actual number of elements the
queue can hold.
We also add an assert for indexing into the queue, as there is a
scenario where the queue reports a larger size than it actually is.
Change-Id: Ie5e699379f303255305c279e58a34dc783df86a0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42423
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Most ISAs used that constant exactly once, when setting up a Process.
This change just propogates the constant to the one place it's used. In
MIPS, the endianness is hard coded as little. There were some checks
which would change the behavior if the endianness was big. This change
removes that dead code. If someone wants to add support for big endian
MIPS, they can go back and add in the small bits of code that would be
required. It's likely the existing big endian support was incomplete and
not tested, so it's probably best for someone interested in it to start
fresh anyway.
Change-Id: Ife6ffcf4bca40001d5d9126f7d795f954f66bb22
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40178
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Previously, RISC-V FS support was unable to support O3CPU.
It was due to two issues:
1. CLINT was calling tc->setMiscRegNoEffect which triggers
a conditionalSquash on O3CPU. These frequent squashes led
to assertion error in src/cpu/o3/inst_queue_impl.hh line
1293 (we still suspect that the assertion might contain
some assumptions).
2. A CSR write to SATP needs to trigger a squash (since
MMU can be activated). This is done by conditionally
adding the IsSquashAfter flag to CSR operations if the
target is SATP. This is a simple fix. (Else, an auipc
right after a CSR write to SATP might compute the wrong
value). In the future, a better implementation should
only set the flag for writes to the relevant bit(s).
Change-Id: Ieb9fd0b9aa09e4d2f270b28c2297ea821a81bf65
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43244
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
Reviewed-by: Peter Yuen <petery.hin@huawei.com>
Changes:
1. RiscvBareMetal
The RiscvBareMetal class and API are preserved for backwards
compatibility, but the base class RiscvFSWorkload is removed
as it inherits from the Workload class. However, most needed
functionalities are already implemented in the KernelWorkload
class
2. RiscvLinux
The RiscvLinux class is added. A dtb filename can be specified
to be loaded to the corresponding memory address.
3. HiFive, Clint, Plic, Uart8250, VirtIOMMIO
Devicetree node generation function is added.
4. tlb, faults
Unnecessary includes of arch/riscv/fs_workload are removed.
Change-Id: Ia239b5614bd93d8e794330ead266f6121a4d13cb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42053
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *union [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>union X ... {
by:
<indent level>union X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^union [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^union ([A-Za-z].*) \{$/union \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ union [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ union ([A-Za-z].*) \{$/ union \1\n \{/g'
and so on.
Change-Id: I066854eb27a8acd2cc2dfa41596bb1b1f66c71b1
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43328
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation (and 2 of 2 spaces,
1 of 3 spaces and 2 of 12 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *enum [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>enum X ... {
by:
<indent level>enum X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^enum ([A-Za-z].*) \{$/enum \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ enum ([A-Za-z].*) \{$/ enum \1\n \{/g'
and so on.
Change-Id: Ib186cf379049098ceaec20dfe4d1edcedd5f940d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In most ISAs except MIPS and Power, this was implemented as
inst->advancePC(). It works just fine to call this function all the
time, but the idea had originally been that for ISAs which could simply
advance the PC using the PC itself, they could save the virtual function
call. Since the only ISAs which could skip the call were MIPS and Power,
and neither is at the point where that level of performance tuning
matters, this function can be collapsed with little downside.
If this turns out to be a performance bottleneck in the future, the way
the PC is managed could be revisited to see if we can factor out this
trip to the instruction object in the first place.
Change-Id: I533d1ad316e5c936466c529b7f1238a9ab87bd1c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39335
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Alex Dutu <alexandru.dutu@amd.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *class [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>class X ... {
by:
<indent level>class X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^class ([A-Za-z].*) \{$/class \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ class ([A-Za-z].*) \{$/ class \1\n \{/g'
and so on.
Change-Id: I17615ce16a333d69867b27c7bae0f4fdafd8b2eb
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39015
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
We are adding a controller method to MemInterface objects making
them able to generate the appropriate memory controller.
This will bring the following benefits
a) Semplification: It will simplify MemConfig.config_mem
b) Reusability: Scripts not using config_mem
won't have to duplicate the if...else checks
c) Modularity: Users will be able to define their own
dram interfaces without needing to handle the mem_ctrl
mapping in the shared MemConfig.py module
Change-Id: I4b836fd7c91675cf7aacc644f25989484d5be3ec
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42074
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There is no way to make this sort of template work with more than one
ISA at a time, and it's also more complex than it needs to be,
particularly since the methods within it are never used in performance
critical code. Using virtual functions is also simpler and uses less
code.
Change-Id: I0baa1a651fa656420f6f90776572f8700a6d7cab
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40106
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The only difference between the NormalLogger and Logger is
a simple implementation for log(), which is then called by
the other loggers. Since this is common to everybody, move
this implementation to Logger and remove NormalLogger.
This makes it possible to test the NormalLoggers using the
current gtest logging framework.
Change-Id: I6805fa14f58ddc7d37b00fcd7fcacb32e0b5d456
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41395
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
In fs simulation, the kernel is loaded to physical address first and
then it would relocate itself to virtual address. The address which
using by kernel symbol table is virtual address. To debug the process
before kernel relocated to virutal memory, we need another copy of
symbol table for physical address.
Change-Id: I38107ff94b301df1a5170dd98774df88cfb02298
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43104
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In some cases, we want to move and copy the symbol table to another
address. However, the name of symbol table should be unique. This rename
helper provides a way to modify the name of symbol. Developers can use
it to solve the conflict with this helper.
Change-Id: I4627e06da3a03da57009d613188be117c75750a0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43105
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch add a new Ruby cache coherence protocol based on Arm' AMBA5
CHI specification. The CHI protocol defines and implements two state
machine types:
- Cache_Controller: generic cache controller that can be configured as:
- Top-level L1 I/D cache
- A intermediate level (L2, L3, ...) private or shared cache
- A CHI home node (i.e. the point of coherence of the system and
has the global directory)
- A DMA requester
- Memory_Controller: implements a CHI slave node and interfaces with
gem5 memory controller. This controller has the functionality of a
Directory_Controller on the other Ruby protocols, except it doesn't
have a directory.
The Cache_Controller has multiple cache allocation/deallocation
parameters to control the clusivity with respect to upstream caches.
Allocation can be completely disabled to use Cache_Controller as a
DMA requester or as a home node without a shared LLC.
The standard configuration file configs/ruby/CHI.py provides a
'create_system' compatible with configs/example/fs.py and
configs/example/se.py and creates a system with private L1/L2 caches
per core and a shared LLC at the home nodes. Different cache topologies
can be defined by modifying 'create_system' or by creating custom
scripts using the structures defined in configs/ruby/CHI.py.
This patch also includes the 'CustomMesh' topology script to be used
with CHI. CustomMesh generates a 2D mesh topology with the placement
of components manually defined in a separate configuration file using
the --noc-config parameter.
The example in configs/example/noc_config/2x4.yaml creates a simple 2x4
mesh. For example, to run a SE mode simulation, with 4 cores,
4 mem ctnrls, and 4 home nodes (L3 caches):
build/ARM/gem5.opt configs/example/se.py \
--cmd 'tests/test-progs/hello/bin/arm/linux/hello' \
--ruby --num-cpus=4 --num-dirs=4 --num-l3caches=4 \
--topology=CustomMesh --noc-config=configs/example/noc_config/2x4.yaml
If one doesn't care about the component placement on the interconnect,
the 'Crossbar' and 'Pt2Pt' may be used and they do not require the
--noc-config option.
Additional authors:
Joshua Randall <joshua.randall@arm.com>
Pedro Benedicte <pedro.benedicteillescas@arm.com>
Tuan Ta <tuan.ta2@arm.com>
JIRA: https://gem5.atlassian.net/browse/GEM5-908
Change-Id: I856524b0afd30842194190f5bd69e7e6ded906b0
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42563
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Rather than print the errno, print the result of strerror so the user
doesn't have to look up what each error code does. Don't duplicate
descriptors needlessly which have been returned by pipe(). Use panic_if
instead of if () panic. Check each call to a standard library function
instead of calling multiple and then only knowing that one of them
failed (but not which one). Close the far side of our pipes for both
the gem5 process, and the process that will become diod. Remove some
stray #undef-s which undefine macros that were never defined. Don't
try to force the descriptors going to diod to be particular numbers.
Slightly reduce nesting in the if which checks the results of fork.
Drop unnecessary \n-s in calls to panic, inform, etc. Minor spacing
related style fixes. Use nullptr instead of NULL.
Change-Id: I48d93778a1e139ef624876a0b316486aac774d7f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43083
Reviewed-by: Yu-hsin Wang <yuhsingw@google.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The WalkCache stats are wrongly using the legacy framework.
With this patch we are registering those to the hierarchical structure.
As we need to pass the Stats::Group parent at construction time,
we are replacing 2d arrays with Vector2d for count stats and using a flat
vector of pointers for the Formula stats
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Change-Id: I8992bc262a376e4e81a4d608c11dff6902e0a01d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42984
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
