In checkpoint output files, the parameters for page table including
size and entries are organized not very clearly. For example:
[system.cpu.workload]
...
ptable.size=...
[system.cpu.workload.Entry0]
vaddr=...
paddr=...
flags=...
[system.cpu.workload.Entry1]
...
This commit moves these parameters into a separate section named
'ptable'. For example:
[system.cpu.workload.ptable]
size=...
[system.cpu.workload.ptable.Entry0]
vaddr=...
paddr=...
flags=...
[system.cpu.workload.ptable.Entry1]
...
Change-Id: Iaa4129b3f4f090e8c3651bde90524abba0999c7f
Signed-off-by: Ian Jiang <ianjiang.ict@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31874
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This changeset adds the necessary changes for running
GCN3 ISA with VIPER in apu_se.py.
Changes to the VIPER protocol configs are made to add support
for DMA and scalar caches.
hsaTopology is added to help the pseudo FS create the files
needed by ROCm to understand the device on which the SW is
being run.
Change-Id: I0f47a6a36bb241a26972c0faafafcf332a7d7d1f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30274
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adding getter and setter methods for getting and setting the atomic ops
in the WriteMask class. This allows for message types with WriteMasks to
get or set the atomic ops without explicitly modifying the constructor
for the message type. This will beused by the DMASequencer which uses the
SequencerMsg type where the constructor is auto generated via SLICC.
Change-Id: I71787d294c1b89547618e9a13e386b65bb3e1021
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31474
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This very simple and mostly useless operation has no side effects, and
can be used to verify that arguments are making it into gem5, being
operated on, and then that a result can be returned into the simulation.
Change-Id: I29bce824078526ff77513c80365f8fad88fef128
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27557
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
`bitfield::replaceBits` has two parameters, `first` and `last`, which
relate to the position of the MSB and the LSB of the bits to be replaced
respectively. Therefore `first` >= `last`. In some areas of the
codebase, this assumption has been flipped with `first` <= `last`. This
caused at least one known error, recorded here:
https://gem5.atlassian.net/browse/GEM5-695. These inconsistencies have
therefore been rectified.
A note has been added to the `bitfield::replaceBits` Doxygen to make
the usage of this function clearer.
Change-Id: Ie75856161d9a5684066430ecbdcc52e04e1e77bf
Issue-on: https://gem5.atlassian.net/browse/GEM5-696
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31674
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The data rate is used by the drampower lib to estimate the power
consumption of the DRAM Core. Previously, we used the formula:
burst_cycles = divCeil(p->tBURST_MAX, p->tCK);
data_rate = p->burst_length / burst_cycles;
to derive the data_rate. However, under certain configurations this
formula computes the wrong result due to rounding errors. This patch
simplifies the way we derive the data_rate by passing the value of the
DRAM parameter beats_per_clock.
Change-Id: Ic8cd35bb4641d9c0a704675d2672a6fe4f4ec13e
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30056
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Compiling gem5 with dramsim2 included fails due to some inconsistencies in
including SimObjects. In this patch this issue is fixed along with
temporarily disabling -Werror=nonnull-compare in CCFLAGS. Also, the remote
for cloning dramsim2 has been changed.
Change-Id: Ia24095150d026d736352aaf0d735b7554ede10bb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31434
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change separates the pipeline stage interfaces
for the GPU's compute unit into their own classes
with a well-defined interface. This helps to create
a cleaner interface for users to extend the CU
pipeline's capabilities and also helps consolidate
all the pipeline communication code in one place
in the source.
Change-Id: I569d52bce84dc1b9fbf8f0f96d53a81a2b6773c6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29972
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In case of flat memory instructions the status for the
LM pipe execution unit is set to SKIP or EMPTY, as the bus
between the VRF and the GM and LM pipe is shared. The
destination operands should not be scheduled for the LM pipe,
event if the wave is in the dispatch list. This can lead
to deadlock in the destination cache as DCEs are reused
and the slotsAvailableForBank count gets artificially
incremented.
Change-Id: I2230c53e3bc1032d2cccbe00fab62c99ab8de6cd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29970
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Affected instructions: V_DIV_SCALE_F64, V_CMP_CLASS_F64,
V_CMPX_CLASS_F64 and their VOPC, VOP3, F32 variants.
These instances of std::isnormal were being used to check for
subnormal (denorms) values. std::isnormal is not specific enough.
It returns true for normal values but false for NaN, Inf, 0.0, and
subnormals. std::fpclassify returns macros for each category of
floating point numbers. Now we only catch subnormals.
Change-Id: I8d8f4452ff58de71e7c8e0b2b5e73467b532e196
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29967
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Replaced !std::isnormal with std::fpclassify because std::isnormal
is not specific enough. !std::isnormal was incorrectly catching
NaN, Inf, 0.0, and subnormals (aka denormals), where as it was only
suppose to catch subnormals.
The return value and error handling spec of std::ldexp listed on
cppreference.com appears to match up in nearly all cases after
making these changes. If std::ldexp handled subnormals as described
in the GCN3 2016 guide, we could have used vdst[lane] = std::ldexp
and not need to check for any corner cases.
Change-Id: I4c77af77c3b7798f86d40442610cef1296a28441
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29966
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
We currently have a bug in decoding workitem ID from the kernel
descriptor with multiple dimensions. The enable_vgpr_workitem_id bits
are currently seperated into x and y components, when they should be
treated as a single 2 bit value, where y is enabled when it is > 0,
and z is enabled when it is > 1. The current setup allows a kernel
launch with vgprs reserved for the z dimension and not the y dimension,
which is incorrect.
Change-Id: Iee64b207feb95bcf064898d5db33b8f201e25323
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29965
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
roundNearestEven is an inst_util function that RNDNE_F64 and F32
call, including both VOP1 and VOP3 formats. IEEE 754 spec says this
function should round inputs to the nearest integer but round ties
to the nearest even integer. Prior to this patch it was rounding all
inputs to nearest even, not just the ties. It was probably implemented
this way originally because the language in the ISA manual is ambiguous
although it provided the correct logic.
Fixed roundNearestEven to use the semantics originally described in
the GCN3 ISA manual.
Change-Id: I83ecb1d516fcf5bdf17e54ddf409b447a129a9a7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29964
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
This change fixes a memory leak due to live GPUDynInstPtr references
to vector store insts being stored in the CU's headTailMap and never
released.
This happened because store insts are not supposed to have their
head-tail latencies tracked by the headTailMap; instead they use
timing information from the GPUCoalescer. When updating the
headTailLatency stat via the headTailMap, only loads were considered
and removed from the headTailMap, however when inserting into the
headTailMap loads and stores were considered, thus leading to the
memory leak.
This change fixes the issue by only adding loads to the headTailMap.
Change-Id: I8a8f5b79f55e00481ae5e82519a9ed627a7ecbd1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29963
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
The BLIT kernels used to implement DMA through the shaders don't fill
out all of the standard fields in an amd_kernel_code_t object. This
patch modifies the code object parsing logic to support these new
kernels.
BLIT kernels are used in APUs when using ROCm memcopies for certain size
buffers, and are used for dGPUs when the SDMA engines are disabled.
Change-Id: Id4e667474d05e311097dbec443def07dfad14a79
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29959
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Based on the 64-bit ELF ABI for Power systems (ppc64 and
ppc64le), the data types int64_t and uint64_t are typedefs
of long and unsigned long respectively. If the SystemC
data types int64 and uint64 point to these, several errors
are observed while building the simulator on Power systems
due to ambiguity between the types when overloading some
operators and functions.
E.g.
...
build/POWER/systemc/ext/channel/../dt/bit/sc_bit.hh:114:17: error: 'static bool sc_dt::sc_bit::to_value(sc_dt::int64)' cannot be overloaded with 'static bool sc_dt::sc_bit::to_value(long int)'
114 | static bool to_value(tp i) { return to_value((int)i); }
| ^~~~~~~~
...
build/POWER/systemc/ext/channel/../dt/bit/sc_bit.hh:114:17: note: previous declaration 'static bool sc_dt::sc_bit::to_value(long int)'
114 | static bool to_value(tp i) { return to_value((int)i); }
| ^~~~~~~~
...
This adds a minor change to a SystemC datatype header to
ensure that the simulator can be built on Power systems.
Change-Id: Icd8bb38134bf98768cc38f9856d7d11a01ebaf21
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31414
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
