These changes enable a simple binary to be simulated in full system mode.
Additionally, a new fault was implemented.
It is executed once the CPU is initialized.
This fault clears all interrupts and sets the pc to a reset vector.
Change-Id: I50cfac91a61ba39a6ef3d38caca8794073887c88
Reviewed-on: https://gem5-review.googlesource.com/9061
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The old utility function called badMode was only checking if the mode
passed as an argument was a recognized mode. It was not checking if the
corresponding mode/EL was implemented. That function has been renamed to
unknownMode and a new badMode has been introduced. This is used by the
cpsrWriteByInstruction function. In this way any try to change the
execution mode won't succeed if the mode hasn't been implemented.
Change-Id: Ibfe385c5465b904acc0d2eb9647710891d72c9df
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/11196
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch adds two new functions named amoMemAtomic used in Atomic CPU
model and initiateMemAMO used in Timing CPU models to issue AMO requests
to the memory system.
Change-Id: I962bdc0e5f25b72c170d96ebc136f29a2b230d5e
Reviewed-on: https://gem5-review.googlesource.com/8186
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
The Illegal Execution fault triggered by the setting of processor state
PSTATE.IL happens in AArch32 as well and takes the form of UNDEFINED
exception fault. We are hence copying the UndefinedInstruction AArch32
fields into the IllegalInstSetStateFault.
Change-Id: Ibb7424397c2030ea5d010577c530277a27036aea
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10814
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch moves the detection of the Illegal Execution flag (PSTATE.IL)
from the tlb translation stage (fetch) to the decoding stage. This is
done by adding the illegalExecution field to the PCState.
Change-Id: I9c1c4e9c6bd5ded905c1d56b3034e4e9322582fa
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10813
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch substitutes reads to the CPSR in user mode (MRS CPSR) to
reads to APSR (Application Program Status Register).
This is the user level alias for the CPSR. The APSR is a subset of the
CPSR.
Change-Id: I18a70693aef6fd305a4c4cb3c6f81f331bc60a2d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10602
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.
Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
The current code to merge translation entries from stage 1 and stage 2
doesn't handle cases where the page sizes at the different stages
differ. This change fixes both the case when the hypervisor has a
larger page size and when it has a smaller page size.
Change-Id: Icdf289005bf1e4de4d91d54643924a38d9d77796
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10505
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
In the Arm ISA there are some sys reg numbers which are reserved for
implementation defined registers. The default behaviour is to to treat
them as unimplemented registers. It is now possible to change this
behaviour at runtime and treat them as NOP. In this way an access to
those register won't make simulation fail.
Change-Id: I0d108299a6d5aa81fcdabdaef04eafe46df92343
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10504
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
In the AArch64 ISA, S3_<op1>_<Cn>_<Cm>_<op2> refers to a pool
of implementation defined registers, provided that reg numbers
are in the following range:
<op1> is in the range 0 - 7
<CRn> can take the values 11, 15
<CRm> is in the range 0 - 15
<op2> is in the range 0 - 7
Change-Id: I7edd013e5cea4887f5e4c5a81f4835b7de93bd50
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10501
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch implements the ARMv8.1 TTBR1_EL2 register, which is used for
getting the translation table base address when a Host Operating System
is running at EL2. (HCR_EL2.E2H = 1)
Change-Id: Ic0ab351cae3fd64855eda7c18c8757da0d7b8663
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10382
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch adds the EL2 Host bit to the HCR_EL2 register. Enables a
configuration where a Host Operating System is running in EL2, and the
Host Operating System's applications are running in EL0.
Change-Id: I92d21ed9f8958c58f135dca1b6a97460ba4c02f9
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10381
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The Arm Semihosting layer currently assumes that the guest application
shares STDIO with gem5. This makes it hard to distinguish application
output from gem5's output and makes it impossible to redirect STDIN
when running in interactive mode. Add support for custom STDIO
redirection when instantiating the Semihosting model.
Change-Id: I3411a6b9bfb008ffc3087d8837f59be72bd1e8ae
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10021
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
This patch updates the CSRs to match the RISC-V privileged specification
version 1.10. As interrupts, faults, and privilege levels are not yet
supported, there are no meaninful side effects that are implemented.
Performance counters are also not yet implemented, as they do not have
specifications. Currently they act as cycle counters.
Note that this implementation trusts software to use the registers
properly. Access protection, readability, and writeability of registers
based on privilege will come in a future patch.
Change-Id: I1de89bdbe369b5027911b2e6bc0425d3acaa708a
Reviewed-on: https://gem5-review.googlesource.com/7441
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>
The bits and insertBits assume the first bit is the larger bit and the last
bit is the smaller bit. This commit fixes several X86 and Power calls to
these functions that incorrectly assumed that first was the smaller bit.
Change-Id: I2b5354d1b9ca66e3436c4a72042416a6ce6dec01
Reviewed-on: https://gem5-review.googlesource.com/10241
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
With this patch a gem5 System will store more info about its Masters.
While it was previously keeping track of the Master name and Master ID
only, it is now adding a per-Master pointer to the SimObject related to
the Master.
This will make it possible for a client to query a System for a Master
using either the master's name or the master's pointer.
Change-Id: I8b97d328a65cd06f329e2cdd3679451c17d2b8f6
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
This patch changes the fault being thrown when MSR/MRS to an unknown
Misc register in AArch64. While previously the instruction was decoded
as an Unknown instruction (hence not printing any information), it is
now decoded as a FailUnimplemented and the unrecognized System register
numbers (CRn, op0...) are printed.
Change-Id: I205ff7adcde5934231c77e8d2250db69a34581fc
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10061
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Some bits in CPACR_EL1 are RES0 but not RAZ/WI. For instance, bit
CPACR_EL1[31] is RES0 but should be made stateful, since it allows
programing of CPACR.ASEDIS. Therefore the masking of CPACR_EL1
is removed.
Change-Id: If1fa3fa1e06bc38495b8afce2c635f3ddf76ce32
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10046
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This patch fixes the masking of cp10 and cp11 in CPACR according to
NSACR.cp10 / NSACR.cp11 by adding the condition "in Non-secure state,
if EL3 is implemented and is using AArch32...", which is specified in
ARM ARM.
Change-Id: Id00e7bf04d6a985e27dbf1028677da0746b79924
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10044
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
When EL3 is not implemented or it is running on AArch64, Secure banking
does not apply and there is only one flatten register version. In this
scenario gem5 is using the _NS (Non-secure) version as a default backing
storage location: secure mode software must be able to access the
non-secure register.
Change-Id: I5086e6228a5cba4d18c632543a2bcf80ffb069a8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9941
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
When we transitioned from having PCs and nextPCs stored as individual items
in the ThreadContext and went to having PC objects with abstracted
components (micro PCs, delay slots, variable instruction lengths, etc.), a
small mistake was made when translating the alpha StackTrace code.
Change-Id: Ib5dd65c53a26920e66899f421902607efd139e71
Reviewed-on: https://gem5-review.googlesource.com/9702
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
This patch introduces the TarmacTracer: an instruction tracer which
allows to dump a gem5 execution trace in Tarmac format [1]. The new
tracer is supporting either Tarmac and TarmacV8 format specifications.
Not every traceable information has been implemented:
Implemented Trace Type:
Instruction Trace
Register Trace
Processor Memory Access Trace
Unimplemented Trace Type:
Program Flow Trace
Event Trace
Memory Bus Trace
[1]: https://developer.arm.com/docs/dui0845/f/tarmac-trace-file-format
Change-Id: I8799d8e5852e868673f728971db3fe8c63961f5e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9382
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
