Event creation and management support from emulated drivers is required
to support interruptible signals in HSA and this support was not
available. This changeset adds the event creation and management support
in the emulated driver. With this patch, each interruptible signal
created by the HSA runtime is associated with a signal event. The HSA
runtime can then put a thread waiting on a signal condition to sleep
asking the driver to monitor the event associated with that signal. If
the signal is modified by the GPU, the dispatcher notifies the driver
about signal value change. If the modifier is a CPU thread, the thread
will have to make HSA API calls to modify the signal and these API calls
will notify the driver about signal value change. Once the driver is
notified about a change in the signal value, the driver checks to see if
any thread is sleeping on that signal and wake up the sleeping thread
associated with that event. The driver has also implemented the time_out
wakeup that can wake up the thread after a certain time period has
expired. This is also true for barrier packets.
Each signal has an event address in a kernel managed and allocated
event page that can be used as a mailbox pointer to notify an event.
However, this feature used by non-CPU agents to communicate with the
driver is not implemented by this changeset because the non-CPU HSA
agents in our model can directly communicate with driver in our
implementation. Having said that, adding that feature should be trivial
because the event address and event pages are correctly setup by this
changeset and just adding the event page's virtual address to our PIO
doorbell interface in the page tables and registering that pio address
to the driver should be sufficient. Managing mailbox pointer for an
event is based on event ID and using this event ID as an index into
event page, this changeset already provides a unique mailbox pointer for
each event.
Change-Id: Ic62794076ddd47526b1f952fdb4c1bad632bdd2e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38335
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The thermal models currently work on temperatures in Celsius stored in
plain doubles. Switch to using Temperature instead and internal
processing in Kelvin. There should be no impact on the result since
all thermal processes work on temperature deltas.
Change-Id: I22d0261ae102f30d86051f24a2d88b067b321c91
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39455
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
This is a major change in our platform configuration.
At the moment the VExpress_GEM5_V1 and VExpress_GEM5_V2 platforms
both instantiate an HDLcd device. As the presence of the device
can slow down host performances when the software stack is
aware of its presence, we have historically been providing
an entry in the hdlcd DTB node to "hide" the entry from the
DTB parser:
status = "disable";
This default entry in the hdlcd node will in fact prevent the driver
from bringing up the device. Unfortunately this is useful for
experienced users only which are aware of this knob.
In order to make things more transparent, and to avoid any confusion
(e.g. having the hdlcd present in the config.ini, but not being able to
program it in Linux) we are deprecating this solution; we are removing
the HDLcd from the aforementioned platforms.
Users not interested on simulating a display controller won't
notice the difference.
Users interested on including it, will now have to switch to a new
VExpress_GEM5_Vx_HLCD platform
which will enabled the HDLcd without any further tweaking required
JIRA: https://gem5.atlassian.net/browse/GEM5-866
Change-Id: I4b1920efe764080115a57f52d8a3df2e6e2386a0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38796
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
We currently use the traditional SI-like prefixes to represent
binary multipliers in some contexts. This is ambiguous in many cases
since they overload the meaning of the SI prefix.
Here are some examples of commonly used in the industry:
* Storage vendors define 1 MB as 10**6 bytes
* Memory vendors define 1 MB as 2**20 bytes
* Network equipment treats 1Mbit/s as 10**6 bits/s
* Memory vendors define 1Mbit as 2**20 bits
In practice, this means that a FLASH chip on a storage bus uses
decimal prefixes, but that same flash chip on a memory bus uses binary
prefixes. It would also be reasonable to assume that the contents of a
1Mbit FLASH chip would take 0.1s to transfer over a 10Mbit Ethernet
link. That's however not the case due to different meanings of the
prefix.
The quantity 2MX is treated differently by gem5 depending on the unit
X:
* Physical quantities (s, Hz, V, A, J, K, C, F) use decimal prefixes.
* Interconnect and NoC bandwidths (B/s) use binary prefixes.
* Network bandwidths (bps) use decimal prefixes.
* Memory sizes and storage sizes (B) use binary prefixes.
Mitigate this ambiguity by consistently using the ISO/IEC/SI prefixes
for binary multipliers for parameters and comments where appropriate.
Change-Id: I9b47194d26d71c8ebedda6c31a5bac54b600d3bf
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39575
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
We currently use the traditional SI-like prefixes for to represent
binary multipliers in some contexts. This is ambiguous in many cases
since they overload the meaning of the SI prefix.
Here are some examples of commonly used in the industry:
* Storage vendors define 1 MB as 10**6 bytes
* Memory vendors define 1 MB as 2**20 bytes
* Network equipment treats 1Mbit/s as 10**6 bits/s
* Memory vendors define 1Mbit as 2**20 bits
In practice, this means that a FLASH chip on a storage bus uses
decimal prefixes, but that same flash chip on a memory bus uses binary
prefixes. It would also be reasonable to assume that the contents of a
1Mbit FLASH chip would take 0.1s to transfer over a 10Mbit Ethernet
link. That's however not the case due to different meanings of the
prefix.
The quantity 2MX is treated differently by gem5 depending on the unit
X:
* Physical quantities (s, Hz, V, A, J, K, C, F) use decimal prefixes.
* Interconnect and NoC bandwidths (B/s) use binary prefixes.
* Network bandwidths (bps) use decimal prefixes.
* Memory sizes and storage sizes (B) use binary prefixes.
Mitigate this ambiguity by consistently using the ISO/IEC/SI prefixes
for binary multipliers for parameters and comments where appropriate.
Change-Id: I6ab03934af850494d95a37dcda5c2000794b4d3a
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39578
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
When in non-caching mode, performance metrics are not meaningful, and
we're just interested in functional level behavior. Going through the
DMA FIFO in the HDLCD controller is very inefficient, and prevents
reading a batch of pixels from memory all in one go.
Change-Id: I3fb6d4d06730b5a94b5399f01aa02186baa5c9b3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38721
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Before the commit, the bootloader had a hardcoded entry point that it
would jump to.
However, the Linux kernel arm64 v5.8 forced us to change the kernel
entry point because the required memory alignment has changed at:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?h=v5.8&id=cfa7ede20f133cc81cef01dc3a516dda3a9721ee
Therefore the only way to have a single bootloader that boots both
pre-v5.8 and post-v5.8 kernels is to pass that information from gem5
to the bootloader, which we do in this patch via registers.
This approach was already used by the 32-bit bootloader, which passed
that value via r3, and we try to use the same register x3 in 64-bit.
Since we are now passing this information, the this patch also removes
the hardcoding of DTB and cpu-release-addr, and also passes those
values via registers.
We store the cpu-release-addr in x5 as that value appears to have a
function similar to flags_addr, which is used only in 32-bit arm and
gets stored in r5.
This commit renames atags_addr to dtb_addr, since both are mutually
exclusive, and serve a similar purpose, DTB being the newer recommended
approach.
Similarly, flags_addr is renamed to cpu_release_addr, and it is moved
from ArmSystem into ArmFsWorkload, since it is not an intrinsic system
property, and should be together with dtb_addr instead.
Before this commit, flags_addr was being set from FSConfig.py and
configs/example/arm/devices.py to self.realview.realview_io.pio_addr
+ 0x30. This commit moves that logic into RealView.py instead, and
sets the flags address 8 bytes before the start of the DTB address.
JIRA: https://gem5.atlassian.net/browse/GEM5-787
Change-Id: If70bea9690be04b84e6040e256a9b03e46710e10
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35076
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This is implemented similary to the NonCachingSimpleCPU, except that
both the normal atomic and noncaching atomic behaviors are implemented
by the same class. The sendDma function now dispatches to a method which
implements one or the other behavior since that function was getting too
big and complex.
Change-Id: I7972971ef41d1373424e587cf67c8444d50de748
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38719
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Instead of generating all of the DMA packets when a request is
initiated, keep track of the necessary properties and generate them as
needed.
The primary benefit of this approach is that if we don't actually need
packets, for instance if we can satisfy the request using a memory
backdoor, we can just skip them. Otherwise we'll have wasted time
creating them, and then have to clean them up.
Change-Id: I04d399fb7bce1ff9a44979c311be356baf2db555
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38717
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This function had a comment claiming that returning an arbitrary request
from the call was necessary for page table walker statistics, but
looking at the actual code, the return type was never used. Also
returning whatever the last request happens to be seems arbitrary, and a
bad boundary for modularization. The page table walker should not depend
on the internal implementation of the DMA port.
Change-Id: I00281fbaf6aeb85b15baf54f3d4a23ca1ac72b8b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38716
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The existing device tree generation method would use the default
frequency as both the min and max frequency when setting up the OSC
device tree nodes. This would sort of work, except it seems that if
the kernel needed to adjust a frequency, it would fail to do so since
it would assume the new frequency was out of range.
Since the existing property is used to set the initial frequency of
those clocks, and because the default, min and max frequencies are all
mostly independent variables (other than obvious ordering restrictions),
two new properties were added, min_freq and max_freq, which are only
there to fill in the frequency range property in the device tree. If
they aren't set, then the device tree generation method falls back to
the old way of using the default frequency as both min and max.
Change-Id: Ie907bd673f8bcb149e69e45c5b486863149b8a68
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37935
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
HSA packet processor will now accept and process agent packets.
Type field in packet is command type.
For now:
AgentCmd::Nop = 0
AgentCmd::Steal = 1
Steal command steals the completion signal for a running kernel.
This enables a benchmark to use hsa primitives to send an agent
packet to steal the signal, then wait on that signal.
Minimal working example to be added in gem5-resources.
Change-Id: I37f8a4b7ea1780b471559aecbf4af1050353b0b1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37015
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This gets rid of the requirement to only modify one byte register at a
time, and builds some structure around individual DMA channels.
The one small feature of the i8237 that was implemented is still
implemented, but now with a method of the i8237.
Change-Id: Ibc2b2d75f2a3b860da3f28ae649c6f1a099bdf7d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36815
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
