This may be directly in the case of native tests, or through a user
level QEMU binary for non-native tests. scons is smart enough to expect
to be able to run native tests always, and non-native tests only if a
qemu binary has been found.
To tell scons to run tests in a particular category, you can use a
command of this form:
scons build/[category]/test/
where category is either an "abi" like sparc or x86, or "native" for
tests which don't do anything target specific and so can be run on the
host.
There will be two directories under .../tests, "bin" and "result". "bin"
is where the test binaries themselves will be built, and "result" is for
the results of running those binaries.
Change-Id: I6450ab4a97169f8a01292d946bfac18008b0430c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27752
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
When the result is returned to the caller from the pseudoInst dispatch
function, the default behavior is to not store that value using the
guestABI mechanism. In the x86 definition, I accidentally used this
version but then didn't store the result manually. The fix should simply
be to not return the result to the instruction definition and to let the
guestABI mechanism handle everything normally.
Change-Id: Ib69f266ad6314032622e5d8d69e9ff114c62657a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38195
Reviewed-by: Daniel Gerzhoy <daniel.gerzhoy@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Previously, we were using ROCm 1.6.2 as there were issues with some of
the machine learning applications that weren't present on 1.6.2.
However, after re-running them we've found that they, and all other
applications previously tested, run to completion.
Additionally, there have been patches to enable BLIT kernels which made
it so we no longer need to build HIP and MIOpen differently for APU and
DGPU code. This allows us to install HIP directly from the .deb packages
instead of from source. Installing from the .deb packages also avoid the
hipDeviceSynchronize() bug. Finally, this makes it so most GPU programs
can be run as-is without modifications to remove hipMalloc/hipMemcpy
calls as was done previously.
Change-Id: Ic61b09ed200b19f759d891487cde874abd607537
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37675
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
exp_cnt (expInstsIssued in the code) is used in the waitcnt instruction
to track that data has been read out of VGPRs in previous global
memory instructions, making it safe to overwrite the VGPRs used in said
global memory instructions.
Previously, exp_cnt wasn't being tracked at all, which lead to the
waitcnt finishing immediately, leading to the memory instruction's VPGRs
getting overwritten by subsequent instructions, causing errors.
This patch makes it so waitcnts waiting on exp_cnt will wait for MUBUF
buffer store instructions to read their VGPRs before completing
Change-Id: Idd2b59511bc086cf316217da27b7a228272b0b0f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37555
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Alexandru Duțu <alexandru.dutu@amd.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The existing device tree generation method would use the default
frequency as both the min and max frequency when setting up the OSC
device tree nodes. This would sort of work, except it seems that if
the kernel needed to adjust a frequency, it would fail to do so since
it would assume the new frequency was out of range.
Since the existing property is used to set the initial frequency of
those clocks, and because the default, min and max frequencies are all
mostly independent variables (other than obvious ordering restrictions),
two new properties were added, min_freq and max_freq, which are only
there to fill in the frequency range property in the device tree. If
they aren't set, then the device tree generation method falls back to
the old way of using the default frequency as both min and max.
Change-Id: Ie907bd673f8bcb149e69e45c5b486863149b8a68
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37935
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Since this class has a custom destructor ~ProbeListener(), it should
also generally have the 4 other methods defined, otherwise calling
those methods lead to subtle failures.
In this specific case, the ProbeManager *const manager; field stores a
pointer back to the ProbeListener object at:
ProbeListener::ProbeListener {
manager->addListener(name, *this);
which gets unregistered by the destructor:
ProbeListener::~ProbeListener()
manager->removeListener(name, *this);
and because the default copy does not re-register anything, it leads to
unregistration.
Therefore, a copy constructor would need the manager to support multiple
identical listeners, or at least refcount them, which would be overkill.
The two move operations would be more feasible, as we could make them
unregister the old ProbeListener address and then re-register the new one,
but that is not very efficient, so we just delete them as well.
A consequence of not implementing the move methods is that it is
impossible to store ProbeListener inside an std::vector. since objects
inside std::vector may need to be moved in memory when the vector resizes,
and therefore need to be movable. The alternative is to use an std::vector
of std::unique_ptr instead.
Change-Id: I8dc0157665391f86e2ca81d144bc6a42e9312d6c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37977
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This register is used since the Linux kernel 5.6 aarch64 boot.
This register indicates CPU capabilities in aarch32 mode, and it has the
same value as the aarch32 ID_ISAR6 miscregister, which is also added.
The capability values of those registers are analogous to those present in
aarch64 accessible ID_AA64ISAR0_EL1 and ID_AA64ISAR1_EL1, which refer to
aarch64 capabilities however, and were already implemented before this
commit.
The arm architecture document clarifies that reads to this system register
location before it had been defined should return 0, but we were faulting
instead:
> Prior to the introduction of the features described by this register,
this register was unnamed and reserved, RES0 from EL1, EL2, and EL3.
Change-Id: I70e99536dc98925e88233fd4c6887bbcdd5d87dc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30935
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In clang, the following error was given:
```
In file included from build/X86/sim/eventq.hh:51:
build/X86/sim/serialize.hh:533:19: error: 'ScopedCheckpointSection' is a protected member of 'Serializable'
Serializable::ScopedCheckpointSection sec(os, sectionName);
^
build/X86/sim/serialize.hh:175:11: note: declared protected here
class ScopedCheckpointSection {
^
```
The use, at line 533, was introduced in this commit:
https://gem5-review.googlesource.com/c/public/gem5/+/36135
This can be fixed by making ScopedCheckpointSection public.
Change-Id: Ib6ffba18d5e8c37980d4febb548f2405cb45ce8c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37915
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Once all ISAs are converted, the base StaticInst class will be able to
drop its local arrays, and will no longer need to know what the global
maximum number of source or destination registers is for a given
instruction.
Most of the convertion was very simple and just involved adding tags to
declare and install the register arrays in all the class definitions.
Since SPARC has a relatively simple ISA definition, there weren't many
places that needed to be updated.
The exception was the BlockMem template, which was declaring the microop
classes within the body of the macroop. That was ok when those
declarations didn't need anything other than the name of their parent,
but now they also need to know how big to declare their arrays based on
their actual implementation.
To facilitate that, and to significantly streamline the definition of
the macroop class, the microop class definitions were moved to their own
template, and only the declaration was left in the parent class.
Change-Id: I09e6b1d1041c6a0aeaee63ce5f9a18cf482b6203
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36879
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This will prevent checkpoints from breaking on every miscreg addition.
Before this commit, miscregs were stored as an array:
[system.cpu.isa]
miscRegs=965 0 0 0 0 0 0 0 0 0 0 0 17895697 ...
and after this commit they are stored as a map:
[system.cpu.isa]
[system.cpu.isa.miscRegs]
cpsr=965
spsr=0
spsr_fiq=0
spsr_irq=0
spsr_svc=0
spsr_mon=0
spsr_abt=0
spsr_hyp=0
spsr_und=0
elr_hyp=0
fpsid=0
fpscr=0
mvfr1=17895697
JIRA: https://gem5.atlassian.net/browse/GEM5-661
Change-Id: I49999c7206bd9ac1cfb81297d45c8117ff8ae675
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36116
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The SmartDict, used by buildEnv, has been added long time ago for
the following reasons: (checking its documentation)
---
The SmartDict class fixes a couple of issues with using the content
of os.environ or similar dicts of strings as Python variables:
1) Undefined variables should return False rather than raising KeyError.
2) String values of 'False', '0', etc., should evaluate to False
(not just the empty string).
---
These are valid reasons, but I believe they should be addressed in
a more standardized way by using a common dictionary.
1) We should simply rely on dict.get
if buildEnv.get('KEY', False/None):
2) We should discourage the use of stringified False or 0.
If we are using a dictionary, can't we just pass those values as
booleans?
The SmartDict is basically converting every value into a
string ("Variable") at every access (__getitem__)
The Variable is a string + some "basic" conversion methods
What is the problem of passing every dict value as a string?
The problem is the ambiguity on the boolean conversion.
If a variable is modelling a boolean, we can return true if
the value is 'yes', 'true'... and false if the value is
'no', 'false' etc. We should raise an exception if it is
something different, like a typo (e.g.) 'Fasle'.
But if the variable is not modelling a boolean, we don't know
how to handle that. How should we convert 'mystring' ?
If we decide to treat 'mystring' as True (which is basically
what a str.__bool__ would return) we will break typoes detection,
as 'Fasle' will now be converted to True, rather than raising
an exception.
Change-Id: I960fbfb1ec0f703e1e372dd752ee75f00632acac
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37775
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There is a mismatch between the tags in MAINTAINERS.yaml and the
valid_tags in the git hook. This means if a user consults the
MAINTAINERS.yaml file to find the appropriate tag, there is a chance of
the commit being rejected due to this mismatch. Now that the maintainers
file is in yaml format, use the util/maint library to parse the valid
tag options. Additional meta tags are added (WIP, RFC) and tags that
were previously valid but not in the MAINTAINERS.yaml file.
Change-Id: I3de8f0b6f8507aa1afd2118bc4373ac0610cce40
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/37220
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
