2c242d6 introduced implicit-fallthrough errors when building against
ARM.
Added "default: return new Unknown(machInst);" to offending switch
statements; please verify this is the corret behavior
Signed-off-by: Ryan Gambord
Change-Id: I5f5e3661ec562d4a3b2699e07d1195e6877ff959
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17071
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
TLB:getMasterPort is used to obtain the PageWalkMasterPort if present and
hides the BaseTLB::getMasterPort().
The TLB::getMasterPort() is renamed according to the expected behavior.
Change-Id: If4f61189094a706d59805cd10f4f814e5830eda8
Reviewed-on: https://gem5-review.googlesource.com/c/16648
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
At the moment the haveGicV3 parameter is used only to signal its
presence when reading the MISCREG_ID_AA64PFR0_EL1 register. It depends
on the system->getGIC pointing to a GICv3 model. However this pointer
is set in the System only at init time (after construction), which means
that the haveGICv3CPUInterface will always be false.
This patch is fixing this by moving the parameter initialization at
startup time, together with the cpu interface registration.
Change-Id: I8da6711ea741ecd0f78ec8ca60a8c3ae3bca2421
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16483
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.
Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Checking if cpsr.mode is equal to MODE_HYP doesn't work for AArch64.
This is because AArch64 is using different modes when in EL2, like EL2T
and EL2H.
This made Virtual Interrupts to be triggered even when executing in EL2
(hypervisor) whereas they should interrupt the scheduled VM only
(Non-Secure EL0 and EL1). This patch is fixing this by using the generic
currEL() helper for getting the exception level, which is working for
both AArch32 and AArch64.
Change-Id: I08640050ef06261f280ba1e63ca9f32c805af845
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16202
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Differently from ArmSPIs, ArmPPI interrupts need to be instantiated by
giving a ThreadContext pointer in the ArmPPIGen::get() method. Since the
PMU is registering the ThreadContext only at ISA startup time, ArmPPI
generation in deferred until the PMU has a non NULL pointer.
Change-Id: I17daa6f0e355363b8778d707b440cab9f75aaea2
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16204
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
A version of Linux kernel initializes counters before enabling them.
Without this change, gem5 overwrites the value of counter, which causes
incorrect counter values derived by kernel.
Change-Id: If0c515111103018d5f65f74434d7711a67aeaee4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16203
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Latest-gen. vector/SIMD extensions, including the Arm Scalable Vector
Extension (SVE), introduce the notion of a predicate register file.
This changeset adds this feature across architectures and CPU models.
Change-Id: Iebcadbad89c0a582ff8b1b70de353305db603946
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13715
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
SIMD & FP Operations use FloatRegs in AArch32 mode and VecRegs in
AArch64 mode. The usage of two different register pools breaks
interprocessing between A32 and A64. This patch is changing definition
of arm operands so that they are backed by VecElems in A32, which are
mapped to the same storage as A64 VecRegs.
Change-Id: I54e2ea0ef1ae61d29aca57ab09acb589d82c1217
Reviewed-on: https://gem5-review.googlesource.com/c/15603
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
VecElem code had been introduced in order to simulate change of renaming
for vector registers. Most of the work is happening on the rename_map
switchRenameMode. Change of renaming can happen after a squash in the
pipeline.
This patch is also changing the interface to the ISA part so that
a PCState is used instead of ISA in order to check if rename mode
has changed.
Change-Id: I8af795d771b958e0a0d459abfeceff5f16b4b5d4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15601
The SWP and SWPB instructions have been removed from AArch32. It was
previously (ARMv7) possible to enable them with the ID_ISAR0.Swap bits,
which are now hardcoded to 0b0000 (SWP and SWPB not implemented)
Change-Id: Ic32b534454a7e0f7494a6f0b5e11182c65b3fe24
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15815
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
These values are all basic integers (specifically uint64_t now), and
so passing them by const & is actually less efficient since there's a
extra level of indirection and an extra value, and the same sized value
(a 64 bit pointer vs. a 64 bit int) is being passed around.
Change-Id: Ie9956b8dc4c225068ab1afaba233ec2b42b76da3
Reviewed-on: https://gem5-review.googlesource.com/c/13626
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Fix poll so that it will use the syscall retry capability
instead of causing a blocking call.
Add the accept and wait4 system calls.
Add polling to read to remove deadlocks that occur in the
event queue that are caused by blocking system calls.
Modify the write system call to return an error number in
case of error.
Change-Id: I0b4091a2e41e4187ebf69d63e0088f988f37d5da
Reviewed-on: https://gem5-review.googlesource.com/c/12115
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Trying to read MPIDR(_EL1) from EL1, should return the value of
VMPIDR_EL2 if EL2 is enabled. This patch is modifying the utility
function for reading MPIDR in order to match this behaviour for both
AArch32 and AArch64.
Change-Id: I32c2d4d5052f509e6e0542a5314844164221c6a3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15617
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Some parts of clone are architecture dependent. In some cases, we are
able to use architecture-specific helper functions or register
aliases. However, there is still some architecture-specific that is
protected by ifdefs in the common clone implementation.
Move these architecture-specific bits to the architecture-specific OS
class instead to avoid these ifdefs and make the code a bit more
readable.
Change-Id: Ia0903d738d0ba890863bddfa77e3b717db7f45de
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Cc: Giacomo Travaglini <giacomo.travaglini@arm.com>
Cc: Javier Setoain <javier.setoain@arm.com>
Cc: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15435
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
The main change is to remove vector registers from the GDB stub.
Those registers were intended for SVE, which is a new architecture feature
and not yet treated by default on the GDB present in Ubuntu 18.04, and
possibly not even on GDB master.
As a result, aarch64 GDB stub connections would fail with:
Remote 'g' packet reply is too long
The correct way to support those registers is to send XML GDB target
description files to the client. This feature is not yet available for
any architecture, and should be implemented in future patches.
Other smaller fixes are:
* cpsr is uint32_t in aarch64 as well as arm
* use M5_ATTR_PACKED on the register structs since they are being cast and
sent as byte arrays
Change-Id: I77cd8a98e322ecc60799e5b11fe5cd414d893cc7
Reviewed-on: https://gem5-review.googlesource.com/c/14495
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
The value that is not initialized has a bogus value that manifests when
using some debug-flags what makes the usage of tracediff a bit more
challenging.
In addition, while debugging with other techniques, it introduces the
problem of understanding if the value of a field is 'intended' or just
an effect of the lack of initialisation.
Change-Id: Ied88caa77479c6f1d5166d80d1a1a057503cb106
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13125
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
