In python, when you use -c it consumes all subsequent parameters and
appends them to argv. Now, gem5 and python behave the same with -c.
Python:
> python -c "import sys; print(sys.argv)" --hello -j
['-c', '--hello', '-j']
gem5:
> gem5.opt -c "import sys; print(sys.argv)" --hello -j
gem5 Simulator System. https://www.gem5.org
gem5 is copyrighted software; use the --copyright option for details.
gem5 version [DEVELOP-FOR-22.1]
gem5 compiled Oct 17 2022 15:47:46
gem5 started Oct 17 2022 15:53:45
gem5 executing on challenger, pid 4021103
command line: build/ALL/gem5.opt -c 'import sys; print(sys.argv)' --hello -j
['-c', '--hello', '-j']
Change-Id: I53e87712be9523e0583149235c9787c92618f884
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/63151
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This change updates the default actions taken when the user doesn't
specify generators for the exit events in the simulator. Rather than
defining default generators, this change makes the generators more
generic and gives a new decorator to mark them as default.
This change then updates the default generators in the simulator and
only makes some of them issue a default warning. For exit events such as
EXIT, the default will no longer print a warning.
Change-Id: I5552f52392f3aea577034ed278a9ff9e8b5b0b01
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/64251
Reviewed-by: Zhantong Qiu <ztqiu@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Modeled after the HiFive Unmatched.
For the cache, we inherited from AbstractClassicCacheHierarchy and
AbstractTwoLevelCacheHierarchy to make a PrivateL1PrivateL2 hierarchy
with the same associativity and sizes as the board. However, the L2
Size is kept as a parameter that can be set by the user.
The core is in-order, therefore we inherited from RISC-V MinorCPU and
used the same pipeline parameters as the ARM HPI CPU, except the
decodeToExecuteForwardDelay, which was increased to 2 to avoid a
PMC access fault.
For the processor, we initialized the core with an ID so that we can
return 4 cores in FS mode, which is the same as the real system,
and 1 in SE mode.
For the memory, we just have a single channel DDR4_2400 with a size of
16 GB and starting at 0x80000000.
For the board, we declared a Boolean variable as a parameter to assign
whether it is in FS mode or not. We inherited from KernelDiskWorkload
and SEBinaryWorkload and initialized the components of the board
according to the Boolean. The other parameters are the clock frequency
and the L2 cache size.
Jira Issue: https://gem5.atlassian.net/browse/GEM5-1257
Change-Id: Ic2c066bb3a41dc2f42566ce971f9a665542f9771
Co-authored-by: Jasjeet Rangi <jasrangi@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/63411
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
While the `runtime` module's `get_runtime_isa` function throws a warning
to remind user's the function is deprecated, this was not always helpful
to a user when setting a processor without a target ISA.
This change adds additional warnings to the SimpleSwitchableProcessor
and the SimpleProcessor. These warnings explain not explicitly setting
the ISA via the processor's constructor is deprecated behavior.
Change-Id: I994ad8355e0d1c3f07374bebe2b59106fb04d212
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/63331
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This change adds a new traffic generator module to the standard
library that can read a .cfg file describing the traffic pattern
as a state machine. It wraps around the TrafficGen SimObject.
In addition it adds a method to ComplexGenerator to set the
traffic from outside using python generators like the example
found in configs/dram/sweep.py.
Change-Id: I5989bb900d26091e6e0e85ea63c741441b72069c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62473
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
simpoints-se-checkpoint.py & simpoints-se-restore.py:
These are two example scripts to show how to use SimPoints functions with
the stdlib.
se_binary_workload.py:
Allow se_binary_workload to take in SimPoint Class item and schedule
SimPoint exit events.
exit_event.py:
Added SIMPOINT_BEGIN and MAX_INSTS exit events.
simulator.py:
Added SIMPOINT_BEGIN and MAX_INSTS exit event scheduling functions.
They can schedule exit events before or during the simulation.
Jira Issue: https://gem5.atlassian.net/browse/GEM5-1259
Change-Id: Iaa07a83de9dddc293b9f1a230aba8e35d4f5af6c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/63154
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
This commit:
https://gem5-review.googlesource.com/c/public/gem5/+/62471
set `sim_quantum` for any simulation done via the Simulator module.
However, this causes issues when setting exit events at a particular
tick. It resulted in the exit being off by the `sim_quantum` value. This
is required for KVM setups but is undesirable for non-KVM setups. Ergo,
this commit ensures the `sim_quantum` is only set in cases where KVM
cores are included in a simulation.
There are two items of note here:
1. When using the SwitchableProcessor the KVM cores may be switched out
and therefore not accessable via the `get_cores` method. To get round
this we check if the processor is a SwitchableProcessor and run an
additionial check that _any_ of the cores in the SwitchableProcessor
are KVM. This is a big hacky; the Processor API should be changed to
make this easier.
2. This only partially fixes the problem of exit events being off given
a specified tick. This will still occur in the case a
SwitchableProcessor is used containing KVM cores. E.g., non-KVM cores
will still be "off" when KVM cores are switched out. This issue will
be addressed in a later commit.
Change-Id: Id966d76cd1630b6c41c5972fa9423c9e48eafaf6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/63051
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
By default, caches in classic memory system are assume to be a mostly
inclusive cache with respect to their upstream caches.
Therefore, `writeback_clean` should be `False` by default, which is
consistent with src/mem/cache/Cache.py
Change-Id: I1395690f7f5fafee7fb151906302877ada953861
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62831
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This commit adds the concept of a "Workload" to the stdlib. Workloads
specify the details needed to run a particular gem5 workload on an
stdlib board. These are specified as part of gem5-resources and loaded
via the `Workload` class though can be specified locally via the
`CustomWorkload` class.
Tests are included in this commit to verify the functionality of these
Workloads.
Change-Id: I8840d281eb01ee4138f01ee499cae96bf7e0579d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62532
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change adds a component for HBM2 stack in the gem5 stdlib.
For HBM2 stack, the atom size is used to interleave across pseudo
channels in a single physical channel or HBMCtrl and the bits
beyond that will be used to interleave across channels/controllers.
Change-Id: I95a279504981a5c000f38c9a6ad0e03484eb258e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/61489
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
An exception was raised if the SwitchableProcessor was setup to
switch to a KVM core from a non-KVM core (i.e., if KVM cores were
present they needed to be the starting core). This was due to a bug in
the Simulator module where the `root.sim_quantum` as not setup for cases
where the SwitchableProcessor was not starting with a KVM core, thus
causing an error when switched to KVM cores.
This has been fixed by modifying the Simulator module to always set
root.sim_quantum. This is acceptable as this is only used in KVM setups.
Change-Id: If57352ba67b7bca81882eae2ef1e9013ef45272f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62471
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Without setting the correct memory mode the SimpleSwitchableProcessor,
the Minor CPU could not be used as a valid core. This patch corrects
this issue by setting the memory mode to TIMING for Minor CPU cores.
Due to the increasingly complex if-else to determine the memory mode, a
function has been added to CPUTypes to determine what MemMode is
required for each CPUType.
Change-Id: I9384b4a9c0673af34cca04917d763ca45d0ea434
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/61535
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
The `set_se_binary_workload` function was only setting up the binary to
work on one (the first) processor core. This caused an exception to be
thrown when trying to run an SE mode binary on a multicore system.
Tests have been added to ensure this works as intended.
Note: While this implementation fixes the bugs, it is limited. Future
work is needed to allow for multiprogram workloads.
Change-Id: I33dbaf5015705c299215dc83e8449b16df301cd4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62014
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Currently, when using the switchable processor the first N cores are the
starting cores and the next N cores (e.g., board.processor.core<N+1>)
are the switched in cores. This is confusing when looking at the stats.
This change makes it so that the names of the different processor lists
used in the dictionary when constructing the switchable processor are
used in for the member names as well. This will allow users to have
names like board.processor.ff_cores and board.processor.detailed_cores.
A bit of refactoring of the base processor was required for this.
Change-Id: I244ee5f6080599acb60a777da979da048cf7463e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62652
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
The BaseCPUProcessor is processor containing BaseCPUCores. This gives
gem5 stdlib users a way to create processors containing BaseCPU
SimObjects. While SimpleProcessor does this by-proxy (the user simply
specifies the desires CPUType and ISA and the correct BaseCPU
instantiation is chosen), this new Processor allows a more raw passing
of BaseCPU objects.
The SimpleProcessor now inherrits from this BaseCPUProcessor to avoid
duplcation of functionality. A refactor to achieve this was moving the
setting of the board's memory mode from the SimpleProcessor's
"incorporate_processor" function to the BaseCPUProcessor's then altering
it to determine MemMode based on BaseCPU subclass rather than the
CPUType.
The tests/gem5/configs/simple_binary_run.py test script has been
extended to create an stdlib run with a BaseCPUProcessor instead of the
SimpleProcessor and tests have been included to ensure the
BaseCPUProcessor functions as intended.
Multiple cores comprising of different BaseCPU types has not been tested
and is not officially supported as of this commit.
Change-Id: I229943ab98ece39646f1b4feb909250bb5c61772
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62353
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
This is the last part needed needed to deprecate SimpleCore's
"get_type" function. This "requires_send_evicts" function can be used by
the cache hierarchy to determine whether the core requres sending
evictions from caches.
Change-Id: I4e42d9fcecf0b1c4344f4cd145126a2ea57b7b76
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62352
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
This function is useful in various parts of the stdlib to know if a core
is KVM or not as KVM cores requires the simulation to be setup slightly
differently.
Prior to this commit checking whether a core was a KVM core was only
possible via the CPUType which we may not always have.
Change-Id: Ibf6155ad631d5d5e93189d7376f022ea1baa685e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62351
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
This separates the idea of a SimpleCore and a BaseCPUCore. A SimpleCore
selects the correct BaseCPU subclass based on user-specified CPUTypes
and target ISA. The new BaseCPUCore type simply wraps any BaseCPU core
for usage in the stdlib.
Much of the code previously handled in SimpleCore has been moved to
BaseCPUCore.
The `cpu_simobject_factory` method has been moved from AbstractCore to
SimpleCore; a more logical location for this function.
Change-Id: I29ce9e381e7d5e8fe57e0db5deb04ad976b7dab9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62292
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
This constraint bound us in many ways. There are many cases where we
want a core in a component which does not correspond to a CPUType
enum value.
This refactoring makes it so only SimpleCore utilizes this.
Docstrings have been updated to reflect this change.
Change-Id: I918c73310fc530dd060691cf9be65163cacfffb4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62291
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
This patch allows a user to set the "GEM5_USE_PROXY" environment
variable, in the format of "<host>:<port>", to declare a socks5 proxy
server to use when obtaining gem5 resources and the resources.json
file.
Note, this requires the Python SOCKS client module, which can be
installed via `pip install PySocks`.
Change-Id: I13f50d71fb6e0713f6a280ec9d2f0b3049c27eb6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62391
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
This commit added two paramaters in the set_se_binary_workload to pass
input parameters for the binary.
The "arguments" object allows users to pass in arugments in a list.
The "stdin_file" object allows users to pass in input file as a
Resource.
This commit also created a local variable "binary_path" to save the
return object of "binary.get_local_path()".
Note:
These new parameters were tested and passed in 4 cases:
1. only passing in (Resource/CustomResource) binary
2. passing in (CustomResource) binary and input_file
3. passing in (CustomResource) binary and argument(no input file
directory included)
4. passing in (CustomResource) binary and argument(with input file
directory included)
Jira Issue: https://gem5.atlassian.net/browse/GEM5-1242
Change-Id: I6433a349f7ecb5d630c7cdbe7268ff18915bf23f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/61609
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
This option doesn't work and triggers a warning by Linux when booting.
To make it work, we need a chosen node containing an `stdout-path`
property in the FDT which currently doesn't exist.
I tried to create via a couple of approaches it but encountered multiple
issues:
1. One can set `stdout-path` to the complete path of the tty device, but
such path is impossible to get programmatically (unless it's
hardcoded).
2. One can set `stdout-path` as a reference to a label. While labels are
possible to generate easily, reference to labels cannot be generated
with the current FDT library.
So just remove this option for the time being.
Change-Id: I58ad879c0fdf567a812069ae91ebc7d4f8accf13
Signed-off-by: Joël Porquet-Lupine <joel@porquet.org>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/61534
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
