The following deadlock was occuring in fetch_unit w/timingSim:
1. exec() is called, a wave is ready to fetch, so it sets pendingFetch
2. A packet is sent to ITLB to fetch for that wave
3. The wave executes a branch, causing the fetch buffer to be cleared
4. The packet is handled, and fetch() is called. However, because the
fetch buffer was cleared, it returns doing nothing.
5. exec() gets called again, but the wave will never be scheduled to
fetch, as pendingFetch is still set to true.
This patch clears pendingFetch (and dropFetch) before returning in fetch()
when the fetch buffer has been cleared.
dropFetch needed to be cleared otherwise gem5 would crash.
Change-Id: Iccbac7defc4849c19e8b17aa2492da641defb772
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34555
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This cleans up the mmap-ing. This is primarily used for testing since
the tests may end up mmap-ing the backing file many times, and we don't
want all those earlier mappings lying around.
This change also makes the original mmap-ing function close the file it
opens, since the man page for mmap explicitly says you can do that and
not lose the mapping. That means we don't have to keep track of the file
descriptor which corresponds to the mmap-ed file when we do the
unmapping, and it's slightly cleaner in general.
Change-Id: I90e3e755cebf3d03e2bf644adf8ef3e157236172
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27750
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Pouya Fotouhi <pfotouhi@ucdavis.edu>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The queue in systemC scheduler is implemented as a std::map. This provides
the best big-O solution. However, most of simulation usecases has very
small number of pending events. This is expected as we usually only trigger a
few new events after some events are processed. In such scenario, we
should optimize for insert/erase instead of search. This change use
std::list instead of std::map.
As a proof, we can find that gem5's original event_queue is also
implemented as a list instead of tree.
We see 5% speed improvement with the example provided by Matthias Jung:
https://gist.github.com/myzinsky/557200aa04556de44a317e0a10f51840
Change-Id: I75c30df9134e94df42fd778115cf923488ff5886
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34515
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
A comment at the top of StaticInstFlags.py says that if IsMemRef is set,
exactly one of IsStore or IsLoad will be set. That's not strictly true
since IsAtomic may be set as well, in which case neither IsStore or
IsLoad will be set (in one example I found).
The isMemRef accessor still exists, and now just ors the IsStore,
IsLoad, and IsAtomic flags.
Change-Id: Ic5ff104da68978273977a6eff2abab5dd0ae7fda
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33744
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There were three different StaticInst flags for memory barriers,
IsMemBarrier, IsReadBarrier, and IsWriteBarrier. IsReadBarrier was never
used, and IsMemBarrier was for both loads and stores, so a composite of
IsReadBarrier and IsWriteBarrier.
This change gets rid of IsMemBarrier and replaces by setting
IsReadBarrier and IsWriteBarrier at the same time. An isMemBarrier
accessor is left, but is now implemented by checking if both of the
other flags are set, and renamed to isFullMemBarrier to make it clear
that it's checking both for both types of barrier, not one or the other.
Change-Id: I702633a047f4777be4b180b42d62438ca69f52ea
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33743
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These were including instruction class definitions from x86 for some
reason. There was no code in those .cc files which actually used
anything from them, as evidenced by the fact that the GCN3_X86 build
still works. No other code in the file was conditionally compiled as of
today.
Change-Id: I3cef8348fb601dd7af67665cf64bbf514c91c3db
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34577
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
These were being initialized with BigRegVect brv = {0}, which made the
compiler complain because there is internal structure. The first element
of the union is actually an array, and this was telling it to initialize
that array to scalar 0. It was warning about this which was breaking the
build.
Instead, use zero initlization like BigRegVect brv = {}. This
initializes the first element of the union to all zeroes, with all
padding bits initialized to zero as well.
This satisfies the compiler and avoids a build error.
Change-Id: I31e7a8730c538637ff2e0c7fb00a4e12ed05e074
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34575
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This was set by MIPS in two places, I think largely just because it was
available. This flag refers to IPRs which are an Alpha concept. In the
O3 CPU, IsIprAccess was used as a possible indicator to determine if an
instruction IsSerializeBefore, but we've already got a flag for that. In
the minor CPU, which hasn't been made to work with MIPS as far as I
know, it was used in a condition but not mentioned in the comment
alongside the condition. I think there it was added for the sake of
Alpha.
This change eliminates that flag and removes it from the O3 and minor
CPUs. In the MIPS ISA description, the instructions that were marked as
IsIprAccess have now been marked as IsSerializeBefore since, if there
was a real reason for them to be marked as IsIprAccess, it would have
been to get it them to work in O3, and there IsSerializeBefore gets
equivalent behavior.
Change-Id: Ia874cde12fa70b998d3e638458f13d69798d40b7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33739
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
We currently register global CPU statistics such as sim_insts and
sim_ops from stat_control.cc. This adds an undesriable dependency on
BaseCPU from stats_contro.cc. Move the CPU-specific stats to a global
stat group in BaseCPU. This group is merged with the Root object's
stats which means that they appear as global stats in a typical stat
dump.
Care has been taken to keep the old stat names. However, the order of
the stats.txt will be slightly different due to the way legacy stats
and new-style stats are serialised.
Change-Id: I5410bc432f1a8cf3de58b08ca54a1aa2711d9c76
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34395
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This version of garnet includes HeteroGarnet which
supports heterogenous interconnect systems, flexible
router and link configurations, and better debugging
resources.
This patch changes the garnet directory structure
to not include the version number. The user will be
informed about the garnet version being used.
Change-Id: Id4763421528305193ae0cd10c159b385a9513553
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34259
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Initializing the network bridge with NULL causes it to have
an class error when instatiating a link. The bridge is only
needed whne either a CDC or SerDes is enabled. This is handled
later during construction of the GarnetLink.
Change-Id: If19a21a6d9bf49449b9c390467d08d3422ae991a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34257
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
