The SWP and SWPB instructions have been removed from AArch32. It was
previously (ARMv7) possible to enable them with the ID_ISAR0.Swap bits,
which are now hardcoded to 0b0000 (SWP and SWPB not implemented)
Change-Id: Ic32b534454a7e0f7494a6f0b5e11182c65b3fe24
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15815
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
These are IntReg, FloatReg, FloatRegBits, and MiscReg. These have been
supplanted by the global types RegVal and FloatRegVal.
Change-Id: I956abfc7b439b083403e1a0d01e0bb35020bde44
Reviewed-on: https://gem5-review.googlesource.com/c/13627
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
These values are all basic integers (specifically uint64_t now), and
so passing them by const & is actually less efficient since there's a
extra level of indirection and an extra value, and the same sized value
(a 64 bit pointer vs. a 64 bit int) is being passed around.
Change-Id: Ie9956b8dc4c225068ab1afaba233ec2b42b76da3
Reviewed-on: https://gem5-review.googlesource.com/c/13626
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Fix poll so that it will use the syscall retry capability
instead of causing a blocking call.
Add the accept and wait4 system calls.
Add polling to read to remove deadlocks that occur in the
event queue that are caused by blocking system calls.
Modify the write system call to return an error number in
case of error.
Change-Id: I0b4091a2e41e4187ebf69d63e0088f988f37d5da
Reviewed-on: https://gem5-review.googlesource.com/c/12115
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
These types are IntReg, FloatReg, FloatRegBits, and MiscReg. There are
some remaining types, specifically the vector registers and the CCReg.
I'm less familiar with these new types of registers, and so will look
at getting rid of them at some later time.
Change-Id: Ide8f76b15c531286f61427330053b44074b8ac9b
Reviewed-on: https://gem5-review.googlesource.com/c/13624
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Trying to read MPIDR(_EL1) from EL1, should return the value of
VMPIDR_EL2 if EL2 is enabled. This patch is modifying the utility
function for reading MPIDR in order to match this behaviour for both
AArch32 and AArch64.
Change-Id: I32c2d4d5052f509e6e0542a5314844164221c6a3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15617
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Implement the Interrupts SimObject for RISC-V. This basically just
handles setting and getting the values of the interrupt-pending and
interrupt-enable CSRs according to the privileged ISA reference chapter
3.1.14. Note that it does NOT implement the PLIC as defined in chapter
7, as that is used for handling external interrupts which are defined
based on peripherals that are available.
Change-Id: Ia1321430f870ff5a3950217266fde0511332485b
Reviewed-on: https://gem5-review.googlesource.com/c/14377
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
In addition to fixing some style issues with resetting, this patch fixes
what happens on reset. The RISC-V privileged ISA reference manual says
that,
on reset:
1. Privilege mode is set to M
2. mstatus.mie <- 0; mstatus.mprv <- 0
3. PC <- reset vector
4. mcause <- reset cause (0 if there is no distinguishing causes)
5. Everything else is undefined
Because of 5, everything else will be left alone
Change-Id: I81bdf7a88b08874e3c3d5fc6c7f3ca2d796496b8
Reviewed-on: https://gem5-review.googlesource.com/c/14376
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Some parts of clone are architecture dependent. In some cases, we are
able to use architecture-specific helper functions or register
aliases. However, there is still some architecture-specific that is
protected by ifdefs in the common clone implementation.
Move these architecture-specific bits to the architecture-specific OS
class instead to avoid these ifdefs and make the code a bit more
readable.
Change-Id: Ia0903d738d0ba890863bddfa77e3b717db7f45de
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Cc: Giacomo Travaglini <giacomo.travaglini@arm.com>
Cc: Javier Setoain <javier.setoain@arm.com>
Cc: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15435
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Any operands which use read_code or write_code would need to start
using the floatToBits and bitsToFloat, but only ARM is using that
mechanism, and not on float operands.
Also I notice that the "predicate" mechanism for operands ignores the
read_code and write_code mechanism, and using both will not work
correctly. This change makes no attempt to fix that problem, but
shouldn't contribute to it either.
Change-Id: I0e3a7f78ed28f40cb66958ef12c32e862950fde0
Reviewed-on: https://gem5-review.googlesource.com/c/14456
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Change a66d12c guards the selection of getdents()
in x86's process.cc file with SYS_getdents, however
process.cc does not include the right header for
SYS_getdents, which leads to x86 choosing the
unimplemented call. This change adds sys/syscall.h to
address the problem.
This change also adds sys/syscall.hh to syscall_emu.cc,
which only includes syscall.hh and may not be supported on
all systems.
Change-Id: If1adcf41e9e455de5f2827ba98c542fdcacdc22e
Reviewed-on: https://gem5-review.googlesource.com/c/14775
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
The main change is to remove vector registers from the GDB stub.
Those registers were intended for SVE, which is a new architecture feature
and not yet treated by default on the GDB present in Ubuntu 18.04, and
possibly not even on GDB master.
As a result, aarch64 GDB stub connections would fail with:
Remote 'g' packet reply is too long
The correct way to support those registers is to send XML GDB target
description files to the client. This feature is not yet available for
any architecture, and should be implemented in future patches.
Other smaller fixes are:
* cpsr is uint32_t in aarch64 as well as arm
* use M5_ATTR_PACKED on the register structs since they are being cast and
sent as byte arrays
Change-Id: I77cd8a98e322ecc60799e5b11fe5cd414d893cc7
Reviewed-on: https://gem5-review.googlesource.com/c/14495
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
The value that is not initialized has a bogus value that manifests when
using some debug-flags what makes the usage of tracediff a bit more
challenging.
In addition, while debugging with other techniques, it introduces the
problem of understanding if the value of a field is 'intended' or just
an effect of the lack of initialisation.
Change-Id: Ied88caa77479c6f1d5166d80d1a1a057503cb106
Signed-off-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13125
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
The Bitselect operation definition used ~ to invert the bits of a mask
value, but if that mask value is of type bool, that generates a
warning. This change casts that value to a uint64_t so that it can
always have ~ applied to it.
Change-Id: I7fbfc6ff264bc32a265f2724c772b8fae08590f7
Reviewed-on: https://gem5-review.googlesource.com/c/14655
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Neither assert(0) nor assert(false) give any hint as to why control
getting to them is bad, and their more descriptive versions,
assert(0 && "description") and assert(false && "description"), jury
rig assert to add an error message when the utility function panic()
already does that directly with better formatting options.
This change replaces that flavor of call to assert with panic, except
in the actual code which processes the formatting that panic uses (to
avoid infinitely recurring error handling), and in some *.sm files
since I don't know what rules those have to follow and don't want to
accidentaly break them.
Change-Id: I8addfbfaf77eaed94ec8191f2ae4efb477cefdd0
Reviewed-on: https://gem5-review.googlesource.com/c/14636
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The implementation of the getdents syscall relies on SYS_getdents, which
is not available on all archs, because the getdents syscall has been
superseded by getdents64, and does not exist on newer archs such as
aarch64.
This leads the build to break on aarch64 hosts with error:
error: 'SYS_getdents' was not declared in this scope
Change-Id: I8701fb5b61c0418b14a9463ef135a391a7f7a9ba
Reviewed-on: https://gem5-review.googlesource.com/c/14596
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
This DPRINTF shouldn't be necessary since it shows the operands and
results of the instruction which the trace should already make
available. Also by passing the destination register to DPRINTF, the ISA
parser will assume that it's also a source when tracking dependencies.
Change-Id: I820387c82578bdbb8d2e3d91652a6c0185077f54
Reviewed-on: https://gem5-review.googlesource.com/c/14475
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
This patch is implicitly deprecating the usage of bootloader patching,
which is injecting instructions from gem5 into the bootloader
binary. This was probably meant to provide a dynamic bootloader
entry point.
This is not needed in ARMv8.0, since we can simply update the
ArmSystem::resetAddress with the bootloader entry point.
Change-Id: I0c469873b8d69f7b49a7383e0754468bc1f2bd72
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14001
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
ARMv8 differs from ARMv7 with the presence of RVBAR register, which
contains the implementation defined reset address when EL3 is not
implemented.
The entry 0x0 in the AArch32 vector table, once used for the Reset
Vector, is now marked as "Not used", stating that it is now IMPLEMENTATION
DEFINED. An implementation might still use this vector table entry to
hold the Reset vector, but having a Reset address != than the general
vector table (for any other exception) is allowed.
At the moment any Reset exception is still using 0 as a vector table
base address. This patch is extending the ArmSystem::resetAddr64 to
ArmSystem::resetAddr so that it can be used for initializing
MVBAR/RVBAR. In order to do so, we are providing a specialized behavior
for the Reset exception when evaluating the vector base address.
Change-Id: I051a730dc089e194db3b107bbed19251c661f87e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/14000
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
RVBAR has been added to the system register list since ARMv8.0-A. It is
implemented only if the highest Exception Level is different (minor)
than EL3. If that's not the case, MVBAR is used. Since the two
registers are mutually exclusive (depending on the presence of EL3),
they share the same coprocessor numbers:
p15, 0, c12, c0, 1
Rather than introducing a new register alias, we overload MVBAR so that
it is treated as RVBAR if ArmSystem::highestEL() < EL3. This patch is
changing the MiscReg info so that EL1 or EL2 access MVBAR (as RVBAR).
N.B MVBAR is RW, whereas RVBAR is RO
Change-Id: Ida3070413fd151ce79c446e99a2a389298d5f5bd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/13999
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
