The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *class [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>class X ... {
by:
<indent level>class X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^class ([A-Za-z].*) \{$/class \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ class ([A-Za-z].*) \{$/ class \1\n \{/g'
and so on.
Change-Id: I17615ce16a333d69867b27c7bae0f4fdafd8b2eb
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39015
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
We are adding a controller method to MemInterface objects making
them able to generate the appropriate memory controller.
This will bring the following benefits
a) Semplification: It will simplify MemConfig.config_mem
b) Reusability: Scripts not using config_mem
won't have to duplicate the if...else checks
c) Modularity: Users will be able to define their own
dram interfaces without needing to handle the mem_ctrl
mapping in the shared MemConfig.py module
Change-Id: I4b836fd7c91675cf7aacc644f25989484d5be3ec
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42074
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch add a new Ruby cache coherence protocol based on Arm' AMBA5
CHI specification. The CHI protocol defines and implements two state
machine types:
- Cache_Controller: generic cache controller that can be configured as:
- Top-level L1 I/D cache
- A intermediate level (L2, L3, ...) private or shared cache
- A CHI home node (i.e. the point of coherence of the system and
has the global directory)
- A DMA requester
- Memory_Controller: implements a CHI slave node and interfaces with
gem5 memory controller. This controller has the functionality of a
Directory_Controller on the other Ruby protocols, except it doesn't
have a directory.
The Cache_Controller has multiple cache allocation/deallocation
parameters to control the clusivity with respect to upstream caches.
Allocation can be completely disabled to use Cache_Controller as a
DMA requester or as a home node without a shared LLC.
The standard configuration file configs/ruby/CHI.py provides a
'create_system' compatible with configs/example/fs.py and
configs/example/se.py and creates a system with private L1/L2 caches
per core and a shared LLC at the home nodes. Different cache topologies
can be defined by modifying 'create_system' or by creating custom
scripts using the structures defined in configs/ruby/CHI.py.
This patch also includes the 'CustomMesh' topology script to be used
with CHI. CustomMesh generates a 2D mesh topology with the placement
of components manually defined in a separate configuration file using
the --noc-config parameter.
The example in configs/example/noc_config/2x4.yaml creates a simple 2x4
mesh. For example, to run a SE mode simulation, with 4 cores,
4 mem ctnrls, and 4 home nodes (L3 caches):
build/ARM/gem5.opt configs/example/se.py \
--cmd 'tests/test-progs/hello/bin/arm/linux/hello' \
--ruby --num-cpus=4 --num-dirs=4 --num-l3caches=4 \
--topology=CustomMesh --noc-config=configs/example/noc_config/2x4.yaml
If one doesn't care about the component placement on the interconnect,
the 'Crossbar' and 'Pt2Pt' may be used and they do not require the
--noc-config option.
Additional authors:
Joshua Randall <joshua.randall@arm.com>
Pedro Benedicte <pedro.benedicteillescas@arm.com>
Tuan Ta <tuan.ta2@arm.com>
JIRA: https://gem5.atlassian.net/browse/GEM5-908
Change-Id: I856524b0afd30842194190f5bd69e7e6ded906b0
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42563
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Splitting hw_prefetches into prefetch_hits and prefetch_misses so both
events can be tracked separately. Also added appropriate functions to
increment stats. Renamed m_prefetches for consistency.
sw_prefetches is not used and has been removed. The sequencer converts
SW prefetch requests into a RubyRequestType_LD/RubyRequestType_ST
which are handled as demand requests by the all current protocols.
Change-Id: Iafa6b31c84843ddd1fad98fa7e5afed02b8c4b4d
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41816
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Prevents error with deprecated implicitly-declared operator= when
Message assignment operator is used.
The copy constructor in the Message class and the ones generated from
SLICC are not doing anything special so use the compiler-generated ones
instead.
Change-Id: I0edec4a44cbb7858f07ed2f2f189455994055c33
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41813
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The patch is using the newly defined PARAMS macro to replace
custom params() getters in derived class.
The patch is also removing redundant _params:
Instead of creating yet another _params field, SimObject descendants
should use params() to expose the real type of SimObject::_params they
already have.
Change-Id: I43394cebb9661fe747bdbb332236f0f0181b3dba
Signed-off-by: Alexander Klimov <Alexander.Klimov@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39900
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
A single functionalRead may not be able to get the whole latest
copy of the block in protocols that have features such as:
- a cache line can be partially present and dirty in a controller
- a cache line can be transferred over the network using multiple
protocol-level messages
To support these cases, this patch adds an alternative function:
bool functionalRead(PacketPtr, WriteMask&)
Protocols that implement this function can partially update
the packet and use the WriteMask to mark updated bytes.
The top-level RubySystem:functionalRead then issues functionalRead
to controllers until the whole block is read.
This patch implements functionalRead(PacketPtr, WriteMask&) for all the
common messages and SimpleNetwork. A protocol-specific implementation
will be provided in a future patch.
The new interface is compiled only if required by the protocol (see
src/mem/ruby/system/SConscript). Otherwise the original interface is
used thus maintaining compatibility with previous protocols.
Change-Id: I4600d5f1d7cc170bd7b09ccd09bfd3bb6605f86b
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31416
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adds additional stats to accounts for incoming and outgoing retries.
Calling incomingTransactionStart with retried==true indicates the
received request initiating the transaction is a retried request.
Calling outgoingTransactionEnd with retried==true indicates the request
was retried by the requester.
Change-Id: I22fd971d4997fce0c114b5ec030cbbf9b463d0c6
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41158
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The mismatches were from places where Params structs had been declared
as classes instead of structs, and ruby's MachineID struct.
A comment describing why the warning had been disabled said that it was
because of libstdc++ version 4.8. As far as I can tell, that version is
old enough to be outside the window we support, and so that should no
longer be a problem. It looks like the oldest version of gcc we
support, 5.0, corresponds with approximately libstdc++ version 6.0.21.
https://gcc.gnu.org/onlinedocs/libstdc++/manual/abi.html#abi.versioning
Change-Id: I75ad92f3723a1883bd47e3919c5572a353344047
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40953
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The TBEStorage is used to track the resources consumed by the TBETable,
i.e. the number of available TBE slots.
structure(TBEStorage, external ="yes") {
int size();
int capacity();
int reserved();
int slotsAvailable();
bool areNSlotsAvailable(int n);
void incrementReserved();
void decrementReserved();
int addEntryToNewSlot();
void addEntryToSlot(int slot);
void removeEntryFromSlot(int slot);
}
TBEStorage resource tracking has two main differences from TBETable:
1) Allows slot reservation. This is useful to implement protocols that
employ retry/credit messages instead of stall when the controller runs
out of TBEs to accept new request.
2) Can also assign multiple entries to the same slot. This is useful to
more easily model cases where multiple transactions share the same TBE
resource (i.e. the slot).
E.g: a request that triggers a replacement in a system without
dedicated WB/Eviction buffer; both transactions can can have separate
logical TBEs associated to the same slot.
The motivation for having a separate structures for tracking TBEs
availability are twofold:
- Keeps TBETable simple and without the additional overhead for
protocols that do not need these additional features.
- Having two separate transactions sharing the same TBE resource using
the current TBETable would be cumbersome since the TBETable is indexed
by the transaction address.
Change-Id: I64106d50068320bc925243732ef8ff9ef0b6c4bf
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41157
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
While the wakeUpBuffers/wakeUpAllBuffers check all message buffers,
wakeup_port wakes up only the messages stalled on the specified port
and address. Usage is the same as the stall_and_wait statement, e.g.:
wakeup_port(reqInPort, addr);
Change-Id: I57dc77d574c0016ca55786ce16a73061a1d37f2e
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41155
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The base/refcnt.hh header was not used in base/types.hh at all, and
enum/ByteOrder.hh was there just so other files could find it. Instead,
this change moves enum/Byteorder.hh to sim/byteswap.hh where it's fits
with the purpose of the header.
This change also fixes some style problems with the code in
base/types.hh itself.
Change-Id: I471ae5cb2cca9169ba8616fb8411b40108a3ffb2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39855
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
We currently use the traditional SI-like prefixes for to represent
binary multipliers in some contexts. This is ambiguous in many cases
since they overload the meaning of the SI prefix.
Here are some examples of commonly used in the industry:
* Storage vendors define 1 MB as 10**6 bytes
* Memory vendors define 1 MB as 2**20 bytes
* Network equipment treats 1Mbit/s as 10**6 bits/s
* Memory vendors define 1Mbit as 2**20 bits
In practice, this means that a FLASH chip on a storage bus uses
decimal prefixes, but that same flash chip on a memory bus uses binary
prefixes. It would also be reasonable to assume that the contents of a
1Mbit FLASH chip would take 0.1s to transfer over a 10Mbit Ethernet
link. That's however not the case due to different meanings of the
prefix.
The quantity 2MX is treated differently by gem5 depending on the unit
X:
* Physical quantities (s, Hz, V, A, J, K, C, F) use decimal prefixes.
* Interconnect and NoC bandwidths (B/s) use binary prefixes.
* Network bandwidths (bps) use decimal prefixes.
* Memory sizes and storage sizes (B) use binary prefixes.
Mitigate this ambiguity by consistently using the ISO/IEC/SI prefixes
for binary multipliers for parameters and comments where appropriate.
Change-Id: I2d24682d207830f3b7b0ad2ff82b55e082cccb32
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39576
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There is a race condition in VIPER where an atomic issued to the same
address can occur resulting in multiple trigger messages signalling the
compleition of the atomic operation. The first message was deallocating
the TBE causing the second message to dereference a nullptr when looking
up the TBE.
A counter is added to track the number of in flight AtomicDone trigger
messages. The AtomicDone is not called until the last in flight message
arrives at the trigger queue. The remaining messages call AtomicNotDone
which simply pops the message from the queue and keeps the TBE
allocated.
Change-Id: Ie1de0436861a7c393ad6d2fb2faceb83c18d4cc3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39175
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
