Replace instances of "GCN3" with Vega. Remove gfx801 and gfx803. Rename
FIJI to Vega and Carrizo to Raven.
Using misc since there is not enough room to fit all the tags.
Change-Id: Ibafc939d49a69be9068107a906e878408c7a5891
These are not yet consumed by anything, but convert all the settings
from SCons variables to Kconfig variables.
If you have existing SConsopts files which need to be converted, you
should take a look at KCONFIG.md to learn about how kconfig is used in
gem5. You should decide if any variables need to be available to C++ or
kconfig itself, and whether those are options which should be detected
automatically, or should be up to the user. Options which should be
measured automatically should still be in SConsopts files, while user
facing options should be added to new or existing Kconfig files.
Generally, make sure you're storing c++/kconfig visible options in
env['CONF'][...]. Also remove references to sticky_vars since persistent
options should now be handled with kconfig, and export_vars since
everything in env['CONF'] is now exported automatically.
Switch SCons/gem5 to use Kconfig for configuration, except EXTRAS which
is still a sticky SCons variable. This is necessary because EXTRAS also
controls what config options exist. If it came from Kconfig itself, then
there would be a circular dependency. This dependency could
theoretically be handled by reparsing the Kconfig when EXTRAS
directories were added or removed, but that would be complicated, and
isn't supported by kconfiglib. It wouldn't be worth the significant
effort it would take to add it, just to use Kconfig more purely.
Change-Id: I29ab1940b2d7b0e6635a490452d05befe5b4a2c9
This reverts gem5#133, the temporary work-around for gem5#131, allowing
both SLC and GLC atomic requests to be made in the GPU tester.
The underlying issues behind gem5#131 have been resolved by gem5#367 and
gem5#397.
While it's plausible to define the cache_line_size as a 32-bit unsigned
int, the use of cache_line_size is way out of its original scope.
cache_line_size has been used to produce an address mask, which masking
out the offset bits from an address. For example, [1], [2], [3], and
[4]. However, since the cache_line_size is an "unsigned int", the type
of the value is not guaranteed to be 64-bit long. Subsequently, the bit
twiddling hacks in [1], [2], [3], and [4] produce 32-bit mask, i.e.,
0x00000000FFFFFFC0.
This behavior at least caused a problem in LLSC in RISC-V [5], where the
load reservation (LR) relies on the mask to produce the cache block
address. Two distinct 64-bit addresses can be mapped to the same cache
block using the above mask.
This patch explicitly defines cache_line_size as a 64-bit unsigned int
so the cache block mask can be produced correctly for 64-bit addresses.
[1]
3bdcfd6f7a/src/cpu/simple/atomic.hh (L147)
[2]
3bdcfd6f7a/src/cpu/simple/timing.hh (L224)
[3]
3bdcfd6f7a/src/cpu/o3/lsq_unit.cc (L241)
[4]
3bdcfd6f7a/src/cpu/minor/lsq.cc (L1425)
[5]
3bdcfd6f7a/src/arch/riscv/isa.cc (L787)
In "src/cpu/testers/gpu_ruby_test" a random number generator was used.
This was using the CPP "<random>" library. This patch changes it to the
gem5 random class (that declared in "base/random.hh").
In addition to this, undeterministic behavior has been removed. Via
"protocol_tester.cc" the RNG is either seeded with a seed specified by
the user, or goes with the gem5 default seed. This ensures reproducable
runs. Prior to this patch the RNG was seeded with `time(NULL)`. This
made finding faults difficult.
Change-Id: Ia8e9f7b87e91323f828e0b7f6c3906c0c5793b2c
This fixes#131 by reverting to the old behavior of performing all
atomics at the system level. To do this the SLC bit needs to be set for
all atomic requests.
Change-Id: I63f4e449be1b02c933832d09700237f8c8026f4c
* gpu-compute: Remove use of 'std::random_shuffle'
This was deprecated in C++14 and removed in C++17. This has been
replaced with std::random. This has been implemented to ensure
reproducible results despite (pseudo)random behavior.
Change-Id: Idd52bc997547c7f8c1be88f6130adff8a37b4116
* dev-amdgpu: Add missing 'overrides'
This causes warnings/errors in some compilers.
Change-Id: I36a3548943c030d2578c2f581c8985c12eaeb0ae
* dev: Fix Linux specific includes to be portable
This allows for compilation in non-linux systems (e.g., Mac OS).
Change-Id: Ib6c9406baf42db8caaad335ebc670c1905584ea2
* tests: Add 'VEGA_X86' build target to compiler-tests.sh
Change-Id: Icbf1d60a096b1791a4718a7edf17466f854b6ae5
* tests: Add 'GCN3_X86' build target to compiler-tests.sh
Change-Id: Ie7c9c20bb090f8688e48c8619667312196a7c123
An example case,
```python
mem_side_port = RequestPort(
"This port sends requests and " "receives responses"
)
```
This is the residue of running the python formatter.
This is done by finding all tokens matching the regex `"\s"(?![.;"])`
and manually replacing them by empty strings.
Change-Id: Icf223bbe889e5fa5749a81ef77aa6e721f38b549
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/66111
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This makes what are configuration and what are internal SCons variables
explicit and separate, and makes it unnecessary to call out what
variables to export to C++.
These variables will also be plumbed into and out of kconfiglib in later
changes.
Change-Id: Iaf5e098d7404af06285c421dbdf8ef4171b3f001
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/56892
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
If the size of the address range is smaller than the maximum number
of outstanding requests allowed downstream, the tester will get stuck
trying to find a unique address. This patch adds a check for this
condition and forces the tester to wait for responses before
trying to generate another request.
Change-Id: Ie894a074cc4f8c7ad3d875dc21e8eb4f04562d72
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/56811
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The tester currently assumes that one token per lane is needed when
checking if an action is ready to be issued. When actually issuing
requests, it is possible that a memory location is not valid for various
reasons. This was not being considered when checking for tokens causing
the tester to acquire more tokens than requests sent. Since tokens are
returned when requests are coalesced, this was causing some tokens never
to be returned, eventually depleting the token pool and causing a
deadlock.
Add a new method which determines the number of tokens needed for an
action. This is called by both the ready check method and the method to
issue the action to ensure they are aligned.
Change-Id: Ic1af72085c3b077539eb3fd129331e776ebdffbc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/56450
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The BaseCPU type had been specializing itself based on the value of
TARGET_ISA, which is not compatible with building more than one ISA at a
time.
This change refactors the CPU models so that the BaseCPU is more
general, and the ISA specific components are added to the CPU when the
CPU types are fully specialized. For instance, The AtomicSimpleCPU has a
version called X86AtomicSimpleCPU which installs the X86 specific
aspects of the CPU.
This specialization is done in three ways.
1. The mmu parameter is assigned an instance of the architecture
specific MMU type. This provides a reasonable default, but also avoids
having having to use the ISA specific type when the parameter is
created.
2. The ISA specific types are made available as class attributes, and
the utility functions (including __init__!) in the BaseCPU class can
refer to them to get the types they need to set up the CPU at run time.
Because SimObjects have strange, unhelpful semantics as far as assigning
to their attributes, these types need to be set up in a non-SimObject
class, which is then brought in as a base of the actual SimObject type.
Because the metaclass of this other type is just "type", things work
like you would expect. The SimObject doesn't do any special processing
of base classes if they aren't also SimObjects, so these attributes
survive and are accessible using normal lookup in the BaseCPU class.
3. There are some methods like addCheckerCPU and properties like
needsTSO which have ISA specific values or behaviors. These are set in
the ISA specific subclass, where they are inherently specific to an ISA
and don't need to check TARGET_ISA.
Also, the DummyChecker which was set up for the BaseSimpleCPU which
doesn't actually do anything in either C++ or python was not carried
forward. The CPU type still exists, but it isn't installed in the
simple CPUs.
To provide backward compatibility, each ISA implements a .py file which
matches the original .py for a CPU, and the original is renamed with a
Base prefix. The ISA specific version creates an alias with the old CPU
name which maps to the ISA specific type. This way, old scripts which
refer to, for example, AtomicSimpleCPU, will get the X86AtomicSimpleCPU
if the x86 version was compiled in, the ArmAtomicSimpleCPU on arm, etc.
Unfortunately, because of how tags on PySource and by extension SimObjects
are implemented right now, if you set the tags on two SimObjects or
PySources which have the same module path, the later will overwrite the
former whether or not they both would be included. There are some
changes in review which would revamp this and make it work like you
would expect, without this central bookkeeping which has the conflict.
Since I can't use that here, I fell back to checking TARGET_ISA to
decide whether to tell SCons about those files at all.
In the long term, this mechanism should be revamped so that these
compatibility types are only available if there is exactly one ISA
compiled into gem5. After the configs have been updated and no longer
assume they can use AtomicSimpleCPU in all cases, then these types can
be deleted.
Also, because ISAs can now either provide subclasses for a CPU or not,
the CPU_MODELS variable has been removed, meaning the non-ISA
specialized versions of those CPU models will always be included in
gem5, except when building the NULL ISA.
In the future, a more granular config mechanism will hopefully be
implemented for *all* of gem5 and not just the CPUs, and these can be
conditional again in case you only need certain models, and want to
reduce build time or binary size by excluding the others.
Change-Id: I02fc3f645c551678ede46268bbea9f66c3f6c74b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/52490
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Remove the line "For use for simulation and test purposes only" in files
were AMD is the only copyright holder listed in the header. This happens
to be the case for all files where this line exists, removing it
completely from gem5.
Change-Id: I623f266b002f564301b28774f49081099cfc60fd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/53943
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In order to fix several regression failures [1] the master/slave
terminology in src/cpu/BaseCPU.py was reintroduced [2].
This patch is addressing the issue by providing 2 different
ways of connecting cpu ports:
*) connectBus: The method assumes an object with a bus interface is
passed as an argument, therefore it tries to bind cpu ports to the
bus.mem_side_ports and bus.cpu_side_ports
*) connectAllPorts: No assumption on the port owning device is made.
The method simply accepts ports as arguments which will be directly
connected to the peer cpu ports
This will be used for example by ruby Sequencers
[1]: https://gem5.atlassian.net/browse/GEM5-775
[2]: https://gem5-review.googlesource.com/c/public/gem5/+/34495
Change-Id: I715ab8471621d6e5eb36731d7eaefbedf9663a71
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/52584
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
::Stats became ::statistics.
"statistics" was chosen over "stats" to avoid generating
conflicts with the already existing variables (there are
way too many "stats" in the codebase), which would make
this patch even more disturbing for the users.
Change-Id: If877b12d7dac356f86e3b3d941bf7558a4fd8719
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45421
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation (and 2 of 2 spaces,
1 of 3 spaces and 2 of 12 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *enum [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>enum X ... {
by:
<indent level>enum X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^enum ([A-Za-z].*) \{$/enum \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ enum ([A-Za-z].*) \{$/ enum \1\n \{/g'
and so on.
Change-Id: Ib186cf379049098ceaec20dfe4d1edcedd5f940d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation, using:
grep -nrE --exclude-dir=systemc \
"^ *class [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>class X ... {
by:
<indent level>class X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^class ([A-Za-z].*) \{$/class \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ class [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ class ([A-Za-z].*) \{$/ class \1\n \{/g'
and so on.
Change-Id: I17615ce16a333d69867b27c7bae0f4fdafd8b2eb
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39015
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch adds the source code for a mode of traffic generator to
generate strided access pattern to the memory. The main difference
between a stridedGen and linearGen are in the way startAddr and
nextAddr are set. In stridedGen instead of increasing the current
address by blocksize to generate nextAddr, it is increased by
strideSize. Also, the offset param is used to indicate the order
of any instances of traffic generator in an array (similar to
threadId.x in CUDA)
Change-Id: I80df414faf1c73f68e87400654675a553de0caa5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40515
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
When building with clang with the --without-tcmalloc flag set, the
-fno-builtin flag is not used, and clang can then detect that the
integer version of abs(), apparently the C version, is being used on a
floating point value in traffic_gen.cc.
This change takes clang's suggestion to use std::abs instead, and also
includes a header file which will provide it.
Change-Id: Ic28ed7454b2ac00c89328d9d0314aed74e946643
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41597
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
