An integer division in the compression:Base:getSize() was being done,
which led to rounding down instead of up.
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
GPR allocation is using fields in the AMD kernel code structure which
are not backwards compatible and are not populated in more recent
compiler versions. Use the granulated fields instead which is enfored to
be backwards compatible.
Change-Id: I718716226f5dbeb08369d5365d5e85b029027932
This fixes occasional readBlob fatals caused by the functional read of
system memory, seen often with the KVM CPU.
Change-Id: Ifccee666f62faa5b2fcf0a64a9d77c8cf95b3add
The amdgpu driver can, at *any* time, tell the device to unmap a queue
to force the queue descriptor to be written back to main memory in the
form of a memory queue descriptor (MQD). It will then immediately remap
the queue and continue writing the doorbell to the queue. It is possible
that the doorbell write occurs after the queue is unmapped but before it
is remapped. In this situation, we need to check the updated value of
the doorbell for the queue and write that to the queue after it is
mapped.
To handle this, a pending doorbell packet map is created to hold a
packet to replay when the queue is mapped. Because PCI in gem5
implements only the atomic protocol port, we cannot use the original
packet as it must respond in the same Tick. This patch fixes issues with
the doorbell maps not being cleared on unmapping to ensure the doorbell
is not found in writeDoorbell and places in the pending doorbell map.
This includes fixing the doorbell offset value in the doorbell to VMID
map which was is now multiplied by four as it is a dword address.
This was tested using tensorflow 2.0's MNIST example which was seeing
this issue consistently. With this patch it now makes progress and does
issue pending doorbell writes.
Change-Id: Ic6b401d3fe7fc46b7bcbf19a769cdea6814e7d1e
gem5 does not currently implement any vendor-specific HSA packets.
Starting in ROCm 5.5, vendor packets appear to end with a completion
signal. Not sending this completion causes gem5 to hang. Since these
packets are not documented anywhere and need to be reverse engineered we
send the completion signal, if non-zero, and finish the packet as is the
current behavior.
Testing: HIP examples working on most recent ROCm release (5.7.1).
Change-Id: Id0841407bec564c84f590c943f0609b17e01e14c
Currently, we are hardcoding the ISA string in the device tree
generator. The ISA string from the device tree affects which
ISA extensions will be used by the bootloader/kernel.
This function allows generating the ISA string from the gem5's
ISA object rather than using hardcoded values.
This series of changes also correct a couple of hardcoded
RISC-V ISA strings in the standard library, as well as not
enable RVV instructions for the U74 core model.
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
This PR is fixing https://github.com/gem5/gem5/issues/449 by applying
the following changes
1) Setting up alloc_on_atomic=False in the stdlib
This is directly related to the error message reported by the Issue #449
2) Disabling far atomics in stdlib with policy type = 0
There is an invalid transaction error, likely caused by the fact the
current implementation
is expecting a 2 level cache hierarchy whereas the stdlib example only
allocates one
level of caches (L1). This needs further investigation
3) Explicitly clearing the atomic log
Even by disabling far atomics, the execution of atomicPartial was
populating
the atomic log queue without ever clearing it. This caused the OOM
killer in Linux
to detect the leak and to kill it when the physical resources of the
machine no longer
sufficed. IMHO the atomic log interface should be revamped as atomic
users should
be allocating the atomic log only if explicitly needed
Currently, the kernel's symbols are shifted by `kernel_paddr_offset`,
which is where the kernel is located in the physcial address space.
However, the symbols are mapped to virtual addresses, which stay the
same even though the physical address space is shifted.
This patch removes the offset for the kernel's symbols virtual
addresses.
Change-Id: I7c35f925777220f56bd8c69bba14c267d2048ade
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
As pointed out by [1], Arm doesn't seem to respect the cacheability
attribute when mapping uncacheable memory. This is because the request
is not tagged as uncacheable during SE translation With this patch we
are checking for the cacheability attribute before finalizing
translation
[1]: https://github.com/gem5/gem5/issues/509
Change-Id: I42df0e119af61763971d5766ae764a540055781b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This is a temporary solution to fix daily tests. We could revert
to the default (policy_type = 1) once the problem is properly
fixed
Change-Id: Ia80af9a7d84d5c777ddeb441110a91a1680c1030
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
The new far atomics implementation [1] didn't take into consideration
it was supposed to manually clear the atomic log. This caused a
memory leak where the log queue was getting bigger and bigger
as no cleaning was happening
[1]: https://github.com/gem5/gem5/pull/177
Change-Id: I4a74fbf15d21e35caec69c29117e2d98cc86d5ff
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
gem5 will otherwise fatal with the error message:
fatal: ... alloc_on_atomic without default or user set value
See github issue [1] for further details
[1]: https://github.com/gem5/gem5/issues/449
Change-Id: I0bb8fccf0ac6d60fc6c1229436a35e91b2fb45cd
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Major refactoring of the branch predictor unit.
- Clearer control flow of the main branch predictor
- Remove `uncondBranch` and `btbUpdate` functions in favor
of a common `historyUpdate` function. There is now only
one lookup function for conditional branches and the new
`historyUpdate` for speculative history update.
- Added a new *target provider* class.
- More expressive statistics depending on the different branch
types.
- Cleanup the branch history management
Current hardcoded value does not support vector instructions.
The new ISA string generator function allows the flexibility
of using or not using the vector extension.
Change-Id: Ic78c4b6629ad3813fc172f700d77ea956552e613
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
Currently, we are hardcoding the ISA string in the device tree
generator. The ISA string from the device tree affects which
ISA extensions will be used by the bootloader/kernel.
This function allows generating the ISA string from the gem5's
ISA object rather than using hardcoded values.
Change-Id: I2f3720fb6da24347f38f26d9a49939484b11d3bb
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
Unfortunately Actions uses docker contaienrs to create files on the
system with root permissions. The 'vagrant' user which we login to run
the Actions Runner, can't remove these files. However, 'vagrant' is part
of the sudo group and can therefore use sudo to remove these files.
I don't like this, but it works.
Major refactoring of the branch predictor unit.
- Clearer control flow of the main branch predictor
- Remove `uncondBranch` and `btbUpdate` functions in favour of a
common `historyUpdate` function. There is now only one lookup
function for conditional branches and the new `historyUpdate` for
speculative history update.
- Added a new *target provider* class.
- More expressive statistics depending on the different branch types.
- Cleanup the branch history management
Change-Id: I21fa555b5663e4abad7c836fc1d41a9c8b205263
Signed-off-by: David Schall <david.schall@ed.ac.uk>
Some debug registers were incorrectly tagged
(e.g. as being writeable). This was causing a bug in some gem5-KVM runs
where gem5 was trying to initialize the state of those registers
(OSLSR_EL1) [1] but KVM was returning an error (as the registers were
RO).
[1]: https://github.com/gem5/gem5/blob/stable/\
src/arch/arm/kvm/armv8_cpu.cc#L408
Capstone is an open source disassembler [1] already used by
other projects (like QEMU).
gem5 is already capable of disassembling instructions. Every StaticInst
is supposed to define a generateDisassembly method which returns the
instruction mnemonic (opcode + operand list) as a string.
This "distributed" implementation of a disassembler relies
on the developer to properly populate the metadata fields
of the base instruction class.
The growing complexity of the ISA code and the massive reuse
of base classes beyond their intended use has led to a
disassembling logic which contains several bugs.
By allowing a tracer to rely on a third party disassembler, we fill the
instruction trace with a more trustworthy instruction stream.
This will make any trace parsing tool to work better and it will
also allow us to spot/fix our own bugs by comparing instruction
traces with native vs custom disassembler
[1]: http://www.capstone-engine.org/
Capstone is an open source disassembler [1] already used by
other projects (like QEMU).
gem5 is already capable of disassembling instructions. Every StaticInst
is supposed to define a generateDisassembly method which returns the
instruction mnemonic (opcode + operand list) as a string.
This "distributed" implementation of a disassembler relies
on the developer to properly populate the metadata fields
of the base instruction class.
The growing complexity of the ISA code and the massive reuse
of base classes beyond their intended use has led to a
disassembling logic which contains several bugs.
By allowing a tracer to rely on a third party disassembler, we fill the
intruction trace with a more trustworthy instruction stream.
This will make any trace parsing tool to work better and it will
also allow us to spot/fix our own bugs by comparing instruction
traces with native vs custom disassembler
[1]: http://www.capstone-engine.org/
Change-Id: I3c4db5072c03d2731265d0398d3863c101dcb180
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
We move it to the child class which is what the TarmacTracer
actually uses.
Change-Id: Ia30892723d2e1f7306dae87c6c9c1d69d00ad73d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
We want to be able to configure from python the disassembler
used by an instruction tracer. The default/base version will
reuse existing instruction logic and it will simply
call the StaticInst::disassemble method.
Change-Id: Ieb16f059a436757c5892dcc82882f6d42090927f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
The scons function Detect will return the program name if the program
is exists in the system. However, the HAVE_PKG_CONFIG is used to
check the pkg-config program is exists and it should be the boolean
type.
Change-Id: I18c4813d36eea68b8851a41db41777bdb2a80b7b
Currently the type of HAVE_DEPRECATED_NAMESPACE is used to detect
if the compiler support gnu::deprecated feature. The return type
of conf.TryCompile is int, but HAVE_DEPRECATED_NAMESPACE is used
as boolean type. The CL is add bool type caster to ensure the type
of it is boolean.
Change-Id: Ife7d9716e485a8be8722d58776f064e7c2268a30
At this moment, VLEN and ELEN RVV parameters are set as constants that
need to be modified at compile time if you want to experiment with
different values. With this patch, I want to set a first point to
discuss how to configure these parameters dynamically.
Also, I have modified some data types that were provoking wrong
behaviour in particular instructions when using a large enough VLEN
value in the considered range inside the specification.
Adds the LULESH GPU Tests to our GitHub Actions infrastructure
Co-authored-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Co-authored-by: Harshil Patel <harshilp2107@gmail.com>
This PR aims to enhance our Docker image build and registry management
by implementing multi-platform support and migrating from the Google
Docker registry to the GitHub Container Registry. Issue:
[#336](https://github.com/gem5/gem5/issues/336)
This patch fixes the size of the memory acceses in vswhole and
vlwhole instructions to the maximum vector length.
Change-Id: Ib86b5356d9f1dfa277cb4b367893e3b08242f93e
This patch adds elen as a member of vector configuration instructions so it can be used with the especulative execution
Change-Id: Iaf79015717a006374c5198aaa36e050edde40cee
In first place, vlen is added as a member of Vector Macro Instructions
where it is needed to split the instruction in Micro Instructions.
Then, new PCState methods are used to get dynamic vlen and vlenb
values at execution.
Finally, vector length data types are fixed to 32 bits so every vlen value
is considered.
Change-Id: I5b8ceb0d291f456a30a4b0ae2f58601231d33a7a
