When unmounting a disk image manually using the
`gem5img umount mount_point` command, the operation can fail if the
process is unable to stat any of the mounts in the mount table. On
some systems this can occur even when running using sudo.
Added an exception check so any mount points that fail to stat will not
cause the whole script to terminate early.
Change-Id: I69cd2494ad0e8c989e19ecd8af8a811905cd6c09
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39897
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The format of the output of sfdisk can change between versions, and
can also change depending on the details of the disk image being
analysed. For example, extra attributes like grain size in the
preamble have been observed.
The current output parsing is quite brittle, expecting a specific
number of lines of preamble. This change switches to a regular
expression based method which searches the output for the line of
interest. The parsing will still be sensitive to changes in the output
of sfdisk, but hopefully less so than the current method.
Change-Id: If03fe999a4986049ae20709895ec1d1b42166023
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39896
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
The register cntfrq should be set to system counter frequency.
However, the current fastmodel implementation accidentally set it to
core frequency. This CL removes the wrong implementation, and real
cntfrq setting is performed in the initState.
Change-Id: I6c62822a4fbbcc0c499f79f6003dabb0c133f997
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40276
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
In Gem5ToTlmBridge::pec, the function expects blockingRequest should be
set no matter the tlm peer returns TLM_UPDATE or TLM_ACCEPTED.
However, current implementation only sets blockingRequest when the tlm
peer returns TLM_ACCEPTED. We should also set blockingRequest when the
tlm peer returns TLM_UPDATE.
Change-Id: I87bba3201cd68d52ded93c9c200f4fa4a40bdf5b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39815
Reviewed-by: Earl Ou <shunhsingou@google.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Event creation and management support from emulated drivers is required
to support interruptible signals in HSA and this support was not
available. This changeset adds the event creation and management support
in the emulated driver. With this patch, each interruptible signal
created by the HSA runtime is associated with a signal event. The HSA
runtime can then put a thread waiting on a signal condition to sleep
asking the driver to monitor the event associated with that signal. If
the signal is modified by the GPU, the dispatcher notifies the driver
about signal value change. If the modifier is a CPU thread, the thread
will have to make HSA API calls to modify the signal and these API calls
will notify the driver about signal value change. Once the driver is
notified about a change in the signal value, the driver checks to see if
any thread is sleeping on that signal and wake up the sleeping thread
associated with that event. The driver has also implemented the time_out
wakeup that can wake up the thread after a certain time period has
expired. This is also true for barrier packets.
Each signal has an event address in a kernel managed and allocated
event page that can be used as a mailbox pointer to notify an event.
However, this feature used by non-CPU agents to communicate with the
driver is not implemented by this changeset because the non-CPU HSA
agents in our model can directly communicate with driver in our
implementation. Having said that, adding that feature should be trivial
because the event address and event pages are correctly setup by this
changeset and just adding the event page's virtual address to our PIO
doorbell interface in the page tables and registering that pio address
to the driver should be sufficient. Managing mailbox pointer for an
event is based on event ID and using this event ID as an index into
event page, this changeset already provides a unique mailbox pointer for
each event.
Change-Id: Ic62794076ddd47526b1f952fdb4c1bad632bdd2e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38335
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The baremetal platform is the platform we use for running
user supplied binaries on baremetal hardware.
(simply put, it runs provided binaries without adding
a gem5 bootloader)
Some layers of this software stack might not have a pci driver.
This might be the case for firmware images like edkII
which needs to use a block device to extract the bootloader
and/or the kernel image. Those can use the memory mapped
(in host domain) virtio block device which is already
part of the VExpress_GEM5 platforms
Change-Id: I9c6ba7e1b4566a3999fd9ba20a2bebe191dc3ef8
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39995
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Some CSR register is physically shared between different privilige
level. Current implementation of CSR setting only considers to verify
the bits visable in current privilige level, and directly writes the
masked bits back to register. This leads to other bits invisable
to current mode is overwritten and wrong behavior across the modes.
Thus, CSR updating should always keep the bits value for other modes.
e.g. disabling interrupt in S mode with setting
SSTATUS SIE bit will lead to clear MIE bit as well (the interrupt
is disabled unintentionally).
All CSR register sharing same physical register in different mode
may have similar issue. I only fixed some important ones.
The fix is verified in FS.
Jira Issue: https://gem5.atlassian.net/browse/GEM5-860
Change-Id: I34d4766a4b483b5add2c3bbefd28b21b9abf37f6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39036
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
The base/refcnt.hh header was not used in base/types.hh at all, and
enum/ByteOrder.hh was there just so other files could find it. Instead,
this change moves enum/Byteorder.hh to sim/byteswap.hh where it's fits
with the purpose of the header.
This change also fixes some style problems with the code in
base/types.hh itself.
Change-Id: I471ae5cb2cca9169ba8616fb8411b40108a3ffb2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39855
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This was checking that the breakpoint length was equal to the length of
the ISA specific MachInst type. Instead, force the ISA specific remote
GDB subclass to implement a check if it wants to, specific to its needs.
The base implementation will just approve of any length, which should be
fine with a well behaved GDB client.
Change-Id: Id7325b788f8445049855f8104082b8e4da1fe300
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39661
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This was mostly not used to begin with, but also when it was used, it
would obscure places where there were types, functions, etc, which were
switched between ISAs at compile time, and which would need to be
cleaned up to allow more than one ISA at a time.
Change-Id: Ieb372feff91b7e946b477fb78e54bcd0c2138966
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39655
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The thermal models currently work on temperatures in Celsius stored in
plain doubles. Switch to using Temperature instead and internal
processing in Kelvin. There should be no impact on the result since
all thermal processes work on temperature deltas.
Change-Id: I22d0261ae102f30d86051f24a2d88b067b321c91
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39455
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
This is a major change in our platform configuration.
At the moment the VExpress_GEM5_V1 and VExpress_GEM5_V2 platforms
both instantiate an HDLcd device. As the presence of the device
can slow down host performances when the software stack is
aware of its presence, we have historically been providing
an entry in the hdlcd DTB node to "hide" the entry from the
DTB parser:
status = "disable";
This default entry in the hdlcd node will in fact prevent the driver
from bringing up the device. Unfortunately this is useful for
experienced users only which are aware of this knob.
In order to make things more transparent, and to avoid any confusion
(e.g. having the hdlcd present in the config.ini, but not being able to
program it in Linux) we are deprecating this solution; we are removing
the HDLcd from the aforementioned platforms.
Users not interested on simulating a display controller won't
notice the difference.
Users interested on including it, will now have to switch to a new
VExpress_GEM5_Vx_HLCD platform
which will enabled the HDLcd without any further tweaking required
JIRA: https://gem5.atlassian.net/browse/GEM5-866
Change-Id: I4b1920efe764080115a57f52d8a3df2e6e2386a0
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38796
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This ABI is effectively used by both the gem5 ops and system calls, in
system calls because it only relies on registers, and in gem5 ops by
inheritance.
Even though these ABIs happen to be the same and were initially defined
to be the same, this change creates a root "reg" ABI which will act as a
root for both so that there isn't an implication that changes to one
should be changes to both.
Change-Id: I8726d8628503be2ad7616a71cc48b66f13e7d955
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39318
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
