Prevents error with deprecated implicitly-declared operator= when
Message assignment operator is used.
The copy constructor in the Message class and the ones generated from
SLICC are not doing anything special so use the compiler-generated ones
instead.
Change-Id: I0edec4a44cbb7858f07ed2f2f189455994055c33
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41813
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The patch is using the newly defined PARAMS macro to replace
custom params() getters in derived class.
The patch is also removing redundant _params:
Instead of creating yet another _params field, SimObject descendants
should use params() to expose the real type of SimObject::_params they
already have.
Change-Id: I43394cebb9661fe747bdbb332236f0f0181b3dba
Signed-off-by: Alexander Klimov <Alexander.Klimov@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39900
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
A single functionalRead may not be able to get the whole latest
copy of the block in protocols that have features such as:
- a cache line can be partially present and dirty in a controller
- a cache line can be transferred over the network using multiple
protocol-level messages
To support these cases, this patch adds an alternative function:
bool functionalRead(PacketPtr, WriteMask&)
Protocols that implement this function can partially update
the packet and use the WriteMask to mark updated bytes.
The top-level RubySystem:functionalRead then issues functionalRead
to controllers until the whole block is read.
This patch implements functionalRead(PacketPtr, WriteMask&) for all the
common messages and SimpleNetwork. A protocol-specific implementation
will be provided in a future patch.
The new interface is compiled only if required by the protocol (see
src/mem/ruby/system/SConscript). Otherwise the original interface is
used thus maintaining compatibility with previous protocols.
Change-Id: I4600d5f1d7cc170bd7b09ccd09bfd3bb6605f86b
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31416
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adds additional stats to accounts for incoming and outgoing retries.
Calling incomingTransactionStart with retried==true indicates the
received request initiating the transaction is a retried request.
Calling outgoingTransactionEnd with retried==true indicates the request
was retried by the requester.
Change-Id: I22fd971d4997fce0c114b5ec030cbbf9b463d0c6
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41158
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
While the wakeUpBuffers/wakeUpAllBuffers check all message buffers,
wakeup_port wakes up only the messages stalled on the specified port
and address. Usage is the same as the stall_and_wait statement, e.g.:
wakeup_port(reqInPort, addr);
Change-Id: I57dc77d574c0016ca55786ce16a73061a1d37f2e
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41155
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Added mapAddressToDownstreamMachine that may be used by the protocols
to map an address to different target donwstream controller of the same
type.
These functions do not use the global mapping provided by the network
and map addresses to one of the controllers specified in the
downstream_destinations parameter.
This change facilitates reusing the same cache state-machine/controllers
to model different levels of the cache hierarchy.
Change-Id: I9a202e9461e0d2f16ed232ff8b60bbde2d15570d
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31415
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Returns the offset of an address with respect to a base address.
Looks unnecessary, but SLICC doesn't support casting and the '-'
operator for Addr types, so the alternative to this would be to add
more some helpers like 'addrToUint64' and 'uint64ToInt'.
Change-Id: I90480cec4c8b2e6bb9706f8b94ed33abe3c93e78
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31270
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Add incomingTransactionStart/End and outgoingTransactionStart/End
functions that can be called from the protocol to profile events
that initiate a transaction locally (e.g. an incoming request) and
remotely (e.g. outgoing requests). The generated stats will include
histograms of the latency for completing each type of transaction.
This assumes assumes the protocol uses different trigger events for
initiating incoming and outgoing transactions.
Change-Id: Ib528641b9676c68907b5989b6a09bfe91373f9c9
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31421
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: John Alsop <johnathan.alsop@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch augments the MESI_Three_Level Ruby protocol with hardware
transactional memory support.
The HTM implementation relies on buffering of speculative memory updates.
The core notifies the L0 cache controller that a new transaction has
started and the controller in turn places itself in transactional state
(htmTransactionalState := true).
When operating in transactional state, the usual MESI protocol changes
slightly. Lines loaded or stored are marked as part of a transaction's
read and write set respectively. If there is an invalidation request to
cache line in the read/write set, the transaction is marked as failed.
Similarly, if there is a read request by another core to a speculatively
written cache line, i.e. in the write set, the transaction is marked as
failed. If failed, all subsequent loads and stores from the core are
made benign, i.e. made into NOPS at the cache controller, and responses
are marked to indicate that the transactional state has failed. When the
core receives these marked responses, it generates a HtmFailureFault
with the reason for the transaction failure. Servicing this fault does
two things--
(a) Restores the architectural checkpoint
(b) Sends an HTM abort signal to the cache controller
The restoration includes all registers in the checkpoint as well as the
program counter of the instruction before the transaction started.
The abort signal is sent to the L0 cache controller and resets the
failed transactional state. It resets the transactional read and write
sets and invalidates any speculatively written cache lines. It also
exits the transactional state so that the MESI protocol operates as
usual.
Alternatively, if the instructions within a transaction complete without
triggering a HtmFailureFault, the transaction can be committed. The core
is responsible for notifying the cache controller that the transaction
is complete and the cache controller makes all speculative writes
visible to the rest of the system and exits the transactional state.
Notifting the cache controller is done through HtmCmd Requests which are
a subtype of Load Requests.
KUDOS:
The code is based on a previous pull request by Pradip Vallathol who
developed HTM and TSX support in Gem5 as part of his master’s thesis:
http://reviews.gem5.org/r/2308/index.html
JIRA: https://gem5.atlassian.net/browse/GEM5-587
Change-Id: Icc328df93363486e923b8bd54f4d77741d8f5650
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30319
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There are race conditions while running several benchmarks, where
the DMA engine and the CorePair simultaneously send requests for the
same block. This patch fixes two scenarios
(a) If the request from the DMA engine arrives before the one from the
CorePair, the directory controller records it as a pending request.
However, once the DMA request is serviced, the directory doesn't check
for pending requests. The CorePair, consequently, never sees a response
to its request and this results in a Deadlock.
Added call to wakeUpDependents in the transition from BDR_Pm to U
Added call to wakeUpDependents in the transition from BDW_P to U
(b) If the request from the CorePair is being serviced by the directory
and the DMA requests for the same block, this causes an invalid
transition because the current coherence doesn't take care of this
scenario.
Added transition state where the requests from DMA are added to the
stall buffer.
Updated B to U CoreUnblock transition to check all buffers, as the DMA
requests were being placed later in the stall buffer than was being checked
Change-Id: I5a76efef97723bc53cf239ea7e112f84fc874ef8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31996
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adds support for device memories in the system and RubySystem classes.
Devices may register memory ranges with the system class and packets
which originate from the device MasterID will update the device memory
in Ruby. In RubySystem functional access is updated to keep the packets
within the Ruby network they originated from.
Change-Id: I47850df1dc1994485d471ccd9da89e8d88eb0d20
JIRA: https://gem5.atlassian.net/browse/GEM5-470
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29653
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
AbstractController sends requests using a QueuedMasterPort which has an
implicit buffer which is unbounded. Remove this by changing the port to
a MasterPort and implement a retry mechanism for AbstractController.
Although the request remains in the MessageBuffer if a retry is needed,
the additional retry logic optimizes serviceMemoryQueue slightly and
prevents the DRAMCtrl retry stats from being incorrect due to multiple
calls to sendTimingReq.
Change-Id: I8c592af92a1a499a418f34cfee16dd69d84803ad
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28387
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch addresses multiple cases:
- When a controller has read/write permissions while others have read
only permissions, the one with r/w permissions performs the read as
the others may have stale data
- When controllers only have lines with stale or busy access permissions,
a valid copy of the line may be in a message in transit in the network
or in a message buffer (not seen by the controller yet). In this case,
we forward the functional request accordingly.
- Sequencer messages should not accept functional reads
- Functional writes also update the packet data on the sequencer
outstanding request lists and the cpu-side response queue.
Change-Id: I6b0656f1a2b81d41bdcf6c783dfa522a77393981
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22022
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: John Alsop <johnathan.alsop@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Calls to queueMemoryRead and queueMemoryWrite do not consider the size
of the queue between ruby directories and DRAMCtrl which causes infinite
buffering in the queued port between the two. This adds a MessageBuffer
in between which uses enqueues in SLICC and is therefore size checked
before any SLICC transaction pushing to the buffer can occur, removing
the infinite buffering between the two.
Change-Id: Iedb9070844e4f6c8532a9c914d126105ec98d0bc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27427
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
Add support in Ruby to use all replacement policies in Classic.
Furthermore, if new replacement policies are added to the
Classic system, the Ruby system will recognize new policies
without any other changes in Ruby system. The following list
all the major changes:
* Make Ruby cache entries (AbstractCacheEntry) inherit from
Classic cache entries (ReplaceableEntry). By doing this,
replacement policies can use cache entries from Ruby caches.
AccessPermission and print function are moved from
AbstractEntry to AbstractCacheEntry, so AbstractEntry is no
longer needed.
* DirectoryMemory and all SLICC files are changed to use
AbstractCacheEntry as their cache entry interface. So do the
python files in mem/slicc/ast which check the entry
interface.
* "main='false'" argument is added to the protocol files where
the DirectoryEntry is defined. This change helps
differentiate DirectoryEntry from CacheEntry because they are
both the instances of AbstractCacheEntry now.
* Use BaseReplacementPolicy in Ruby caches instead of
AbstractReplacementPolicy so that Ruby caches will recognize
the replacement policies from Classic.
* Add getLastAccess() and useOccupancy() function to Classic
system so that Ruby caches can use them. Move lastTouchTick
to ReplacementData struct because it's needed by
getLastAccess() to return the correct value.
* Add a 2-dimensional array of ReplacementData in Ruby caches
to store information for different replacement policies. Note
that, unlike Classic caches, where policy information is
stored in cache entries, the policy information needs to be
stored in a new 2-dimensional array. This is due to Ruby
caches deleting the cache entry every time the corresponding
cache line get evicted.
Change-Id: Idff6fdd2102a552c103e9d5f31f779aae052943f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20879
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Removed the icache/dcache hit latency parameters from the Sequencer.
They were replaced by the mandatory queue enqueue latency that is now
defined by the top-level cache controller. By default, the latency is
defined by the mandatory_queue_latency parameter. When the latency
depends on specific protocol states or on the request type, the protocol
may override the mandatoryQueueLatency function.
Change-Id: I72e57a7ea49501ef81dc7f591bef14134274647c
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18413
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
MemObject doesn't provide anything beyond its base ClockedObject any
more, so this change removes it from most inheritance hierarchies.
Occasionally MemObject is replaced with SimObject when I was fairly
confident that the extra functionality of ClockedObject wasn't needed.
Change-Id: Ic014ab61e56402e62548e8c831eb16e26523fdce
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18289
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.
Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
A packet queue is typically used to hold on to packets that are
schedules to be sent in the future or when they need to queue behind
younger packets that have been sent out yet. Due to memory order
requirements, some MemObjects need to maintain the order for packet
(mostly responses) that reference the same cache block.
Prior to this patch the ordering requirements where determined when
the packet was scheduled to be sent. This patch moves the parameter to
the constructor.
Change-Id: Ieb4d94e86bc7514f5036b313ec23ea47dd653164
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15555
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Packet::checkFunctional also wrote data to/from the packet depending
on if it was read/write, respectively, which the 'check' in the name
would suggest otherwise. This renames it to doFunctional, which is
more suggestive. It also renames any function called checkFunctional
which calls Packet::checkFunctional. These are
- Bridge::BridgeMasterPort::checkFunctional
- calls Packet::checkFunctional
- MSHR::checkFunctional
- calls Packet::checkFunctional
- MSHR::TargetList::checkFunctional
- calls Packet::checkFunctional
- Queue<>::checkFunctional
(of src/mem/cache/queue.hh, not src/cpu/minor/buffers.h)
- Instantiated with Queue<WriteQueueEntry> and Queue<MSHR>
- WriteQueueEntry
- calls Packet::checkFunctional
- WriteQueueEntry::TargetList
- calls Packet::checkFunctional
- MemDelay::checkFunctional
- calls QueuedSlavePort/QueuedMasterPort::checkFunctional
- Packet::checkFunctional
- PacketQueue::checkFunctional
- calls Packet::checkFunctional
- QueuedSlavePort::checkFunctional
- calls PacketQueue::doFunctional
- QueuedMasterPort::checkFunctional
- calls PacketQueue::doFunctional
- SerialLink::SerialLinkMasterPort::checkFunctional
- calls Packet::doFunctional
Change-Id: Ieca2579c020c329040da053ba8e25820801b62c5
Reviewed-on: https://gem5-review.googlesource.com/11810
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.
Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
