The 'max_dequeue_rate' parameter limits the rate at which messages can
be dequeued in a single cycle. When set, 'isReady' returns false if
after max_dequeue_rate is reached.
This can be used to fine tune the performance of cache controllers.
For the record, other ways of achieving a similar effect could be:
1) Modifying the SLICC compiler to limit message consumption in the
generated wakeup() function
2) Set the buffer size to max_dequeue_rate. This can potentially cut the
the expected throughput in half. For instance if a producer can
enqueue every cycle, and a consumer can dequeue every cycle, a
message can only be actually enqueued every two (assuming
buffer_size=1) since the buffer entries available after dequeue
are only visible in the next cycle (even if the consumer executes
before the producer).
JIRA: https://gem5.atlassian.net/browse/GEM5-920
Change-Id: I3a446c7276b80a0e3f409b4fbab0ab65ff5c1f81
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41862
Reviewed-by: Meatboy 106 <garbage2collector@gmail.com>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Three changes below:
1. The m_stall_time was declared as statistics::Average, but
statistics::Average uses AvgStor as storage and this works as per-tick
average stat. In the case of m_stall_time, Scalar should be used to get
the calculation right.
2. The function used to get an enqueue time was changed since the
getTime() returns the time when the message was created.
3. Record the stall time only when the message is really dequeued
from the buffer (stall time is not evaluated when the message is moved
to stall map).
Change-Id: I090d19828b5c43f0843a8b735d3f00f312c436e9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/54363
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Remove the line "For use for simulation and test purposes only" in files
were AMD is the only copyright holder listed in the header. This happens
to be the case for all files where this line exists, removing it
completely from gem5.
Change-Id: I623f266b002f564301b28774f49081099cfc60fd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/53943
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
::Stats became ::statistics.
"statistics" was chosen over "stats" to avoid generating
conflicts with the already existing variables (there are
way too many "stats" in the codebase), which would make
this patch even more disturbing for the users.
Change-Id: If877b12d7dac356f86e3b3d941bf7558a4fd8719
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45421
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The Bridge SimObject, which hosts the CDC and SerDes functionality,
could be woken up out-of-order when changing frequencies in DVFS.
This change ensures there is no packet drop during the transition
times.
Change-Id: I40240dcb3e957217abd2d7ad22cc4f78809f7b49
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44287
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Flitbuffers act as FIFOs for internal links and output queues
in routers. This change replaces the use of vectors with deque
for performance improvements. The older implementation of using
a vector combined with a heap sort was both incorrect and
inefficient.
Incorrect because flit buffers should act strictly
as FIFO, sorting them based on time changes the order which affects
functionality in the case of DVFS enabled NoCs.
Change-Id: Ieba40f85628b7c7255e86792d40b8ce3d7ac34b5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44286
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The switch allocator implements a two step separable allocator and
utilizes port winner and vc winner data structures for functionality.
This improves the data structures used and their operations to improve
overall performance of the simulation. We start with an invalid output
port(-1) and an invalid vc(-1) and then allocate the outports
and vcs to inport.
Change-Id: I38b70ebdc1a54b8f748c2a5d510814bf139b9eaa
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/44285
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The patch is using the newly defined PARAMS macro to replace
custom params() getters in derived class.
The patch is also removing redundant _params:
Instead of creating yet another _params field, SimObject descendants
should use params() to expose the real type of SimObject::_params they
already have.
Change-Id: I43394cebb9661fe747bdbb332236f0f0181b3dba
Signed-off-by: Alexander Klimov <Alexander.Klimov@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39900
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
A single functionalRead may not be able to get the whole latest
copy of the block in protocols that have features such as:
- a cache line can be partially present and dirty in a controller
- a cache line can be transferred over the network using multiple
protocol-level messages
To support these cases, this patch adds an alternative function:
bool functionalRead(PacketPtr, WriteMask&)
Protocols that implement this function can partially update
the packet and use the WriteMask to mark updated bytes.
The top-level RubySystem:functionalRead then issues functionalRead
to controllers until the whole block is read.
This patch implements functionalRead(PacketPtr, WriteMask&) for all the
common messages and SimpleNetwork. A protocol-specific implementation
will be provided in a future patch.
The new interface is compiled only if required by the protocol (see
src/mem/ruby/system/SConscript). Otherwise the original interface is
used thus maintaining compatibility with previous protocols.
Change-Id: I4600d5f1d7cc170bd7b09ccd09bfd3bb6605f86b
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31416
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This commit makes move stats from several classes in mem/ruby
to corresponding Stats::Group's.
For ruby's Profiler, additional changes are made: there are stats that
are profiled for each of RequestType, for each of MachineType, and for
each of combinations of RequestType and MachineType. The current naming
scheme is ...<stat_name>.<request_type_name>.<machine_type_name>. To make
it easier for stats parser to know whether the stat is of RequestType, or
is of MachineType, or is of (RequestType, MachineType), a prefix is added
as follows,
...<meta>.<stat_name>.<request_type_name>.<machine_type_name>
where <meta> is one of {RequestType, MachineType, RequestTypeMachineType}.
Another point of using this naming scheme is that the parser doesn't
need to know all of RequestType and MachineType.
Change-Id: I8b8bdd771c7798954f984d416f521e8eb42d01ed
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36478
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The variable 'm_allow_zero_latency' was only used in an assert message in
`src/mem/ruby/network/MessageBuffer.cc`. This assert is stripped when
compiling to gem5.fast, resulting in the compilation failing with an
unused variable error.
This assert is better as a panic_if, which will not be stripped out
during the .fast compilation.
Change-Id: I5de74982fa42b3291899ddcf73f7140079e1ec3f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/36697
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There are cases in which we need to prevent randomization for a
specific buffer when enabled at the RubySystem level (e.g. a internal
trigger queue that requires zero latency enqueue, while other buffers
can be randomized).
This changes the randomization parameter to support enabling and
disabling randomization regardless of the RubySystem setting.
Change-Id: If7520153cc5864897fa42e8911a6f8acbcf01db5
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31419
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Messages may be enqueued and be ready in the same cycle.
Using this feature may introduce nondeterminism in the protocol and
should be used in specific cases. A case study is to avoid needing an
additional cycle for internal protocol triggers (e.g. the All_Acks
event in src/mem/ruby/protocol/MOESI_CMP_directory-L2cache.sm).
To mitigate modeling mistakes, the 'allow_zero_latency' parameter must
be set for a MessageBuffer where this behavior is acceptable.
This changes also updates the Consumer to schedule events according to
this new behavior. The original implementation would not schedule a new
wakeup event if the wakeup for the Consumer had already been executed
in that cycle.
Additional authors:
- Tuan Ta <tuan.ta2@arm.com>
Change-Id: Ib194e7b4b4ee4b06da1baea17c0eb743f650dfdd
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31255
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change replaces the __attribute__ syntax with the now standard [[]]
syntax. It also reorganizes compiler.hh so that all special macros have
some explanatory text saying what they do, and each attribute which has a
standard version can use that if available and what version of c++ it's
standard in is put in a comment.
Also, the requirements as far as where you put [[]] style attributes are
a little more strict than the old school __attribute__ style. The use of
the attribute macros was updated to fit these new, more strict
requirements.
Change-Id: Iace44306a534111f1c38b9856dc9e88cd9b49d2a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35219
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This version of garnet includes HeteroGarnet which
supports heterogenous interconnect systems, flexible
router and link configurations, and better debugging
resources.
This patch changes the garnet directory structure
to not include the version number. The user will be
informed about the garnet version being used.
Change-Id: Id4763421528305193ae0cd10c159b385a9513553
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34259
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Initializing the network bridge with NULL causes it to have
an class error when instatiating a link. The bridge is only
needed whne either a CDC or SerDes is enabled. This is handled
later during construction of the GarnetLink.
Change-Id: If19a21a6d9bf49449b9c390467d08d3422ae991a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34257
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Currently there are independent round robin arbiter at each
input port and output port. Every time a VC is selected for
output allocation round robin is incremented irrespective of
if it is selected by its output port or not. This leads to
unfair arbitration at input port and is well known[1]. This
patch fixes it to increment only if the output port also
selects it.
[1] D. U. Becker and W. J. Dally, "Allocator implementations
for network-on-chip routers," Proceedings of the Conference
on High Performance Computing Networking, Storage and
Analysis, Portland, OR, 2009, pp. 1-12
Change-Id: I65963fb8082c51c0e3c6e031a8b87b4f5c3626e1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32601
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Currently the Switch Allocator takes up most of the simulation
wall clock time. This function checks for all VCs to see if it
should wakeup next. The input units which are simulated before
the switch allocator could have scheduled it already. This patch
adds a check for it.
Change-Id: I8609d4e7f925aa5e97198f6cd07466530f6fcf4c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32600
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
This change allows configuring each router with a certain number
of VCs for each VNET. This is beneficial when dealing with
heterogenous link widths in a system. Configuring VCs
for each router allows one to ensure equal throughput
within the network while avoiding head-of-line blocking.
Changing a router's VCs number can be done in topology files
using the vcs_per_vnet value argument of router.
Change-Id: Icf4f510248128429a1a11f19f9802ee96f340611
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32599
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This upgrades the garnet model to support HeteroGarnet
1) Static and dynamic multi-freq domains in network
2) Support for CDC
3) Separate links for each message class
4) Separate linkwidth for each message class
5) Support for SerDes
Change-Id: I6d00e3b5cb3745e849d221066cb46b2138c47871
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32597
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Adds support for device memories in the system and RubySystem classes.
Devices may register memory ranges with the system class and packets
which originate from the device MasterID will update the device memory
in Ruby. In RubySystem functional access is updated to keep the packets
within the Ruby network they originated from.
Change-Id: I47850df1dc1994485d471ccd9da89e8d88eb0d20
JIRA: https://gem5.atlassian.net/browse/GEM5-470
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29653
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
