Software such as Trusted Firmware-A checks the MIDR register
to identify which core model is present in the platform.
The previous default value referred to a Cortex-A15 Armv7-A
processor, however when AArch64 is enabled, an Armv8 processor
is expected.
This patch assigns the Cortex-A57 MIDR if AArch64 is enabled.
Change-Id: Id1677a77d2f04843423f7b013405445f3d253399
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22846
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The original Gem5 does not give correct disassembly for atomic
instructions, which are implemented with one or two micro instructions.
The correct register indices are not decoded until subsequent micro
instruction is processed. This patch fixes the problem by getting the
register indices and other properties (aq and rl) from certain bitfields
of the machine code in the disassembling function.
Change-Id: I2cdaf0b3c48ff266f19ca707a5de48c9050b3897
Signed-off-by: Ian Jiang <ianjiang.ict@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22568
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Alec Roelke <alec.roelke@gmail.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
In disassembling compressed instructions, the original Gem5 gives needless
operands, such as register or immediate. This patch fixes the problem.
- Existing formats fixed: CIOp, CJOp, CBOp and Jump.
- New formats added: CIAddi4spnOp (for c.addi4spn only) and CompressedROp (with
templates CBasicDeclare and CBasicExecute)
Change-Id: Ic293836983256a59d3a7aca091c8184b410516a4
Signed-off-by: Ian Jiang <ianjiang.ict@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22566
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Alec Roelke <alec.roelke@gmail.com>
Maintainer: Alec Roelke <alec.roelke@gmail.com>
For U-type instructions auipc and lui, the 20-bit immediate is left-shifted
by 12 bits in decoding. While the original Gem5 gives the left-shifted
value directly in disassembly.
This patch fixes the problem by
- Assign the original 20-bit immediate to internal variable "imm".
- Output "imm" directly in disassembly, as how the original Gem5 does.
- Do the left-shift to "imm" later in the function defining of each
instruction, rather than in decoding.
Change-Id: I300e26fd9c79478783c39fcd6ff70ea06db88884
Signed-off-by: Ian Jiang <ianjiang.ict@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22564
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Alec Roelke <alec.roelke@gmail.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
When serialize and unserialize an variable, the parameters passed to
SERIALIZE_SCALAR() and UNSERIALIZE_SCALAR() must be the same and should be a
general variable name. If not, the expected item would not be found with
UNSERIALIZE_SCALAR() and a fatal error would be introduced.
This patch fix the bug in class Interrupts of RISCV.
Change-Id: I7dd7ab6805651149304959bdf7ee9f3be9d9eaff
Signed-off-by: Ian Jiang <ianjiang.ict@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22643
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Alec Roelke <alec.roelke@gmail.com>
Maintainer: Alec Roelke <alec.roelke@gmail.com>
These tests assume the "end address" is not included in the range. This
exposed some bugs in addr_range.hh which have been fixed. Where
appropriate code comments in addr_range.hh have been extended to improve
understanding of the class's behavior.
Hard-coded AddrRange values in the project have been updated to take
into account that end address is now exclusive. The python params.py
interface has been updated to conform to this new standard.
Change-Id: Idd1e75d5771d198c4b8142b28de0f3a6e9007a52
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22427
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These namespaces were used to set up an environment/context where there
was an implicit guest namespace. This is an issue when there may be
multiple guest endiannesses which might be different. In cases where
we don't know what the guest endianness is, we can't rely on it being
an implicit part of our context since that would be ambiguous. In cases
where we do know, for instance in ISA specific code, we can just use
the endianness specific version that's appropriate for that context.
This also (somewhat) removes the assumption that there is a single
endianness that applies for a particular ISA. Practically speaking this
assumption will probably still stand though, since there would likely
be a non-trivial performance penalty to apply a configurable endianness
instead of a fixed one the compiler can optomize/remove.
Change-Id: I2dff338b58726d724f387388efe32d9233885680
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22374
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Prior to this patch table walks were always cacheable unless
cacheability was globally disabled by SCTLR.C being 0. Arm allows to
select the memory attributes of table walks via the TCR registers.
For example the TCR.IRGN0 bits:
Inner cacheability attribute for memory associated with translation
table walks using TTBR0_EL1.
IRGN0 Meaning
0b00 Normal memory, Inner Non-cacheable.
0b01 Normal memory, Inner Write-Back Read-Allocate Write-Allocate
Cacheable.
0b10 Normal memory, Inner Write-Through Read-Allocate No
Write-Allocate Cacheable.
0b11 Normal memory, Inner Write-Back Read-Allocate No Write-Allocate
Cacheable.
Note: we check IRGNx bits (Inner Shareable domain) instead of ORGNx
(Outer Shareable domain) since in gem5 we consider everything as
Inner Shareable.
Change-Id: If472c218040029c9d165b056a052f522d48d4a82
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22723
Tested-by: kokoro <noreply+kokoro@google.com>
The TarmacParser was assuming 32 bit accesses only.
This was creating a mismatch when parsing a trace with 64 bit
accesses.
E.g.
In
clk IT (18) 002001f4 f8008441 O EL3h_s : STR x1,[x2],#8
clk MW8 00201008:000000201008 00000000_40000401
Only the 32 MSBs were checked (00000000)
Change-Id: I51e803b53efe953edcd9378f6c9481c04932331e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21562
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This is needed when a CMO triggers an exception (e.g. DataAbort) In that
case the faulting address should be the one encoded in the instruction
rather than the cacheline address:
According to armarm:
If a memory fault that sets FAR_EL1 is generated from a data cache
maintenance or other DC instruction, FAR_EL1[63:0] holds the address
specified in the register argument of the instruction.
Change-Id: I6d0dadbef6e70db57438b01a76c5def3bdd2d974
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22443
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This lets us avoid having to set up bridges for all the different
interrupt signals coming out of the CPU. When we have more cores, like
in the x2, x3, and x4 versions of the CPU, we won't have to have a
set of bridges for each set of signals, and can connect them all to
external ports using array notation, keeping everything simple,
concise, and maintainable.
Change-Id: I1a5f707073868516e93c106dc17d105409de668a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21504
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Chun-Chen TK Hsu <chunchenhsu@google.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The first function handles the repetitive process of creating an
ObjectFile for a particular purpose and checking if that was
successful.
The second conditionally offsets the images in case they were, for
instance, loaded from an ELF file which already had them in the right
place. It offsets them so that their entry point (which will be zero
for raw images) lines up with the appropriate entry address (which will
be at the start of raw images).
This is more correct in more cases, and also removes a lot of
redundancy. There's still a lot of redundancy in the code which sets
up the symbol tables, but there are some irregularities which make that
harder to wrap in a helper function.
Change-Id: I2fee8b2175faff284ff9e007307f7769043497a1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21469
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The consolePanicEvent pointer and addConsoleFuncEvent template were
inherited from Alpha and were not used (and probably make no sense) for
MIPS or RISCV which (to my knowledge) don't have the idea of a
"console" binary.
Change-Id: I109b866a65f69c7334062f7304c7b18acc51d99d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21782
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This was useful when transitioning away from the CPU based
comInstEventQueue, but now that objects backing the ThreadContexts have
access to the underlying comInstEventQueue and can manipulate it
directly, they don't need to do so through a generic interface.
Getting rid of this function narrows and simplifies the interface.
Change-Id: I202d466d266551675ef6792d38c658d8a8f1cb8b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22113
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This switches to letting the ThreadContexts use a thread based/local
comInstEventQueue instead of falling back to the CPU's array. Because
the implementation is no longer shared and it's not given where the
comInstEventQueue (or other implementation) should be accessed, the
default implementation has been removed.
Also, because nobody is using the CPU's array of event queues, those
have been removed.
Change-Id: I515e6e00a2174067a928c33ef832bc5c840bdf7f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22110
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
