Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Differently from ArmSPIs, ArmPPI interrupts need to be instantiated by
giving a ThreadContext pointer in the ArmPPIGen::get() method. Since the
PMU is registering the ThreadContext only at ISA startup time, ArmPPI
generation in deferred until the PMU has a non NULL pointer.
Change-Id: I17daa6f0e355363b8778d707b440cab9f75aaea2
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16204
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
A version of Linux kernel initializes counters before enabling them.
Without this change, gem5 overwrites the value of counter, which causes
incorrect counter values derived by kernel.
Change-Id: If0c515111103018d5f65f74434d7711a67aeaee4
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16203
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Writing a 1 to the Overflow Flag Status register should trigger an
interrupt raise/clear depending on the register we are currently using
(PMOVSCLR for clearing and PMOVSSET for raising).
Change-Id: I2091456685a245712045cf7a4932ac36b7dded1d
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12531
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
With this patch the python ArmInterruptPin SimObject matches to the
C++ ArmInterruptPinGen. The latter is in charge of generating
the ArmInterruptPin (which is not a SimObject anymore).
This is meant to ease the generation of ArmInterruptPins: by
not being SimObjects we are not forced to instantiate them
in the configuration script; we can generate them dynamically
instead throughout simulation.
Change-Id: I917d73a26168447221f5993c8ae975ee3771e3bf
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12401
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Change the definition of PMU events in order to integrate events not
cannot easily be represented by probe points. The software
increment event is now defined as a special type with its separate
implementation in pmu.cc and pmu.hh.
Change-Id: I43874b9641bf38c54f6ba2c26386542b6a73e282
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5764
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Events were not being attached to counters after a checkpoint resume.
By not storing the enable private variable from the stored state the
recreation of the event to counter association is automatically carried.
The enable state is stored in the reg_pmcnten.
Change-Id: I46344df0882a9050c900efb2e8996d64dbfbf297
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5761
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
When writing a bitmask of counters to PMSWINC, the PMU currently
increments the corresponding counters regardless of what they are
configured to count. According to the ARM ARM (D5.10.4), counters
should only be updated if they have been configured to count
software events (event type 0).
Change-Id: I5b2bc1fae55faa342b863721c9838342442831a9
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4285
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
ARMv8.1 added a second architected event range, 0x4000-0x4040. Events
in this range are discovered using the high word of PMCEID{0,1}_EL0
Change-Id: I4cd01264230e5da4c841268a7cf3e6bd307c7180
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3960
Remve the assertion that we always need to add a delta larger than
zero as that does not seem to be true when we hit it in the
'PMU reset cycle counter to zero' case.
Committed by Jason Lowe-Power <power.jg@gmail.com>
Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:
* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.
* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.
* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).
* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.
* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.
This patch adds support for filtering events in the PMU. In order to
do so, it updates the ISADevice base class to forward an ISA pointer
to ISA devices. This enables such devices to access the MiscReg file
to determine the current execution level.
Another churn to clean up undefined behaviour, mostly ARM, but some
parts also touching the generic part of the code base.
Most of the fixes are simply ensuring that proper intialisation. One
of the more subtle changes is the return type of the sign-extension,
which is changed to uint64_t. This is to avoid shifting negative
values (undefined behaviour) in the ISA code.
This class implements a subset of the ARM PMU v3 specification as
described in the ARMv8 reference manual. It supports most of the
features of the PMU, however the following features are known to be
missing:
* Event filtering (e.g., from different privilege levels).
* Access controls (the PMU currently ignores the execution level).
* The chain counter (event no. 0x1E) is unimplemented.
The PMU itself does not implement any events, it merely provides an
interface for the configuration scripts to hook up probes that drive
events. Configuration scripts should call addEventProbe() to configure
custom events or high-level methods to configure architected
events. The Python implementation of addEventProbe() automatically
delays event type registration until after instantiation.
In order to support CPU switching and some combined counters (e.g.,
memory references synthesized from loads and stores), the PMU allows
multiple probes per event type. When creating a system that switches
between CPU models that share the same PMU, PMU events for all of the
CPU models can be registered with the PMU.
Kudos to Matt Horsnell for the initial gem5 implementation of the PMU.
