This patch adds the ability for a host-OS process external to gem5
to access the backing store via POSIX shared memory.
The new param shared_backstore of the System object is the filename
of the shared memory (i.e., the first argument to shm_open()).
Change-Id: I98c948a32a15049a4515e6c02a14595fb5fe379f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30994
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Some ARM instructions were using quiesce and quiesceSkip pseudo
instruction bodies instead of implementing the one line of each of those
functions themselves. This creates two problems. First, it adds an
artificial depedence on the pseudo instruction implementations. Second,
it would confusing cause pseudo instruction DPRINTFs to fire when normal
instructions were executing.
This change simply replaces the calls with their targets one line
implementation, with some very minor duplication from multiple call
sights factored out into a local variable.
Change-Id: I596eafd8714227fa7f69edd542108598c9809b11
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27790
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
When restoring a checkpoint containing a generic timer, the checkpoint
expects to connect the timer to the same number of CPUs that were
present when the checkpoint was taken. If the number of CPUs in the
new simulation is different, deserialization will fail. In the case
that the number of CPUs expected by the checkpoint is greater than the
number of CPUs present, this will cause a segmentation fault caused by
reading off the end of the list of Thread Contexts.
This commit fixes the problem by checking the number of CPUs present
in the simulation matches the number of CPUs expected by the generic
timer checkpoint. If there is a mismatch, a fatal error is triggered
with an informative message to the user.
Change-Id: Iff9ad68d64e67b3df51682b7e4e272e5f355bcd6
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30576
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
The O3 model uses ReExec faults to flush the pipeline and restart
after a memory ordering violation, e.g. due to an incoming snoop.
These, just like branch mispredict flushes, are not architectural
faults but micro-architectural events, and should therefore not
show up on the instruction tracing interface.
This adds a check on faulting instructions in commit, to verify
if the instruction faulted due to ReExec, to avoid tracing it.
Change-Id: I1d3eaffb0ff22411e0e16a69ef07961924c88c10
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30554
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
This commit implements Vector Catch exception as they are described
in Armv8 reference manual chapter G2. This exception is just for AArch32.
+ tlb.cc: Implements the entry point for vector catch in addres mode
+ faults.hh/cc: Implements the entry point for vector catch in exception trap mode.
+ miscregs.cc: enables the use of vector catch releated registers
+ miscregs_types.hh: New bitwise type for vector catch control registers.
+ types.hh: declaration of EC for vector catch exception
+ self_debug.hh/cc: Main implementation of the vector catch functions to
match address and exceptions type.
Change-Id: Idbef26b16eff059e94ff16fac13bf5708dfe647f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30618
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This commit implements SelfHosted Debug Software step as is defined in
Armv8 Reference manual chapter D2.
+ decoder.hh/cc/isa: Checks the software step bit in order to skip the instruction
before its decode.
+ faults.hh/cc: implemented SoftwareStep exception and proper modification
of spsr during the invoke of other exceptions
+ isa.cc: Set debug mask if needed during cpsr modification
+ tlb.cc: Checks if software step is in ACTIVE state to avoid trigger
breakpoint or watchpoint exception
+ self_debug.hh/cc: Implementation of State change and ss bit based during eret.
+ types.hh: Define sofware step flags like step, load or stepped to check the different flags
that triggering software step should use for the ISS code.
+ pseudo.hh/isa: Triggers the sofware step esception after decode.
+ static_inst.cc: Call debugExceptionReturnsSS durint eret routine.
Change-Id: I3a64507c64842c34c76ad7f6daa5f4306bd55d2c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30617
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adds support for device memories in the system and RubySystem classes.
Devices may register memory ranges with the system class and packets
which originate from the device MasterID will update the device memory
in Ruby. In RubySystem functional access is updated to keep the packets
within the Ruby network they originated from.
Change-Id: I47850df1dc1994485d471ccd9da89e8d88eb0d20
JIRA: https://gem5.atlassian.net/browse/GEM5-470
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29653
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This commit makes it possible to make invocations such as:
gem5.opt se.py --stats-root 'system.cpu[:].dtb' --stats-root 'system.membus'
When --stats-root is given, only stats that are under any of the root
SimObjects get dumped. E.g. the above invocation would dump stats such as:
system.cpu0.dtb.walker.pwrStateResidencyTicks::UNDEFINED
system.cpu1.dtb.walker.pwrStateResidencyTicks::UNDEFINED
system.membus.pwrStateResidencyTicks::UNDEFINED
system.membus.trans_dist::ReadReq
but not for example `system.clk_domain.clock`.
If the --stats-root is given, only new stats as defined at:
Idc8ff448b9f70a796427b4a5231e7371485130b4 get dumped, and old ones are
ignored. The commits following that one have done some initial conversion
work, but many stats are still in the old format.
Change-Id: Iadaef26edf9a678b39f774515600884fbaeec497
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28628
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change includes ArmV8 SelfDebug Watchpoint implementation
as is described in Armv8 Reference manual D2/G2
The changes specific descriptions are as follow:
+ ArmISA.py: Enable up to 16 DBGWn registers
+ isa.cc: Include in setMiscReg specific cases for DBGWCn registers enable bit
+ miscregs_types.hh: Define DBGWC bitwise types
+ miscregs.hh/cc: Definition of watchpoint registers and its initialization
+ tlb.cc: Call for watchpoint entry point on tlb translation for dtlb.
+ fault.cc/hh: Definition/implementation of Watchpoint exception and
modification on DataAbort Exception accordingly to handle
AArch32 Watchpoint exceptions.
+ types.hh: Exception Code for watchpoint.
+ self_debug.cc/hh: Watchpoint check and comparison. Definition and
implementation of all the watchpoint auxiliar functions.
Change-Id: If275e4df0d28918dd887ab78166e653da875310a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28589
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This change accidentally left out a "break" which gcc found and
complained about.
arch-arm: Implementation of Hardware Breakpoint exception
This change adds in the break based on the assumption that the function
should not fall through that case to the next.
Change-Id: Id728a0c9a504d1b6d231d3fe1e7c5ece05d3ac4d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30654
Reviewed-by: Jordi Vaquero <jordi.vaquero@metempsy.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The alignment spaces in stats.txt takes up a lot of space and increases
simulation time, this commit adds the option to disable them with:
--stats-file stats.txt?spaces=False
Sample old lines with ?desc=False:
system.cpu.op_class::FloatMultAcc 0 0.00% 65.92%
system.cpu.op_class::FloatDiv 0 0.00% 65.92%
Sample new lines with ?desc=False;spaces=False:
system.cpu.op_class::FloatMultAcc 0 0.00% 65.92%
system.cpu.op_class::FloatDiv 0 0.00% 65.92%
On a 1000 dumpstats m5op loop spaces=False reduces:
* size: from 38MB to 20MB
* time: from 4.5s to 3.5s
Change-Id: Ib738b996b5646c329094cf61aaa1d977e844e759
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28627
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This code implementes hardware breakpoint exception as part of
software debug explained in ARMv8 reference manual ChapterD2.
+ ArmISA.py: Modify register to allow up to 15 Breakpoint registers
+ Sconscript: Add new file self_debug
+ faults.cc/hh: Defintion and implementation of HardwareBreakpoint
exception inheriting ArmFault.
+ isa.cc/hh: ArmISA contains now an attribute pointing to the SelfDebug
object that will be used to be access SelfDebug infrastructure
Added special cases for setMiscReg to cache debug enable bits.
+ miscregs.hh/cc: Definition and initialization of DBGDCn and DBGDVn
registers.
+ tlb.cc/hh: We include the access to check for breakpoint instruction as
part of the tlb translation process, checking if it comes from a
fetch in the itlb
+ types.hh: Definition of new bitwise register types.
+ utility.cc/hh: Definition and implementation of auxiliar functions for
the selfDebug.
+ self_debug.hh/cc: Main files that include the implemenattion of
breakpoint checks, selfdebug enable and auxiliar functions.
Change-Id: I0e2a4be7f778de560c512253a9148da61e3e7e7a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27967
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Currently, when an instruction has an operand that reads a const
value, it goes thru the same readMiscReg() api call as other
misc registers (real HW registers, not constant values). There
is an issue, however, when casting from the const values (which are
32b) to higher precision values, like 64b.
This change creates a separate, templated function call to the GPU's
ISA state that will return the correct type.
Change-Id: I41965ebeeed20bb70e919fce5ad94d957b3af802
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29927
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This fixes conditions that perform a redundant check to
see if an unsigned value is greater than or equal to
zero. With gcc 10.x, this generates the following error
because of implicit usage of the "-Werror=type-limits"
flag.
"comparison of unsigned expression in '>= 0' is always true"
Change-Id: Ib1a88035ef5fba410d18de0adf614db4bc634faf
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30474
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch sets the faulting flag in atomic, timing, minor and o3 CPU
models.
It also fixes the minor/timing CPU models which were not respecting the
ExecFaulting flag. This is now checked before calling dump() on the
tracing object, to bring it in line with the other CPU models.
Change-Id: I9c7b64cc5605596eb7fcf25fdecaeac5c4b5e3d7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30135
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch adds a faulting flag to InstRecord.
This allows tracers to identify that the traced instruction has
faulted, when ExecFaulting is enabled. It can be set with
InstRecord::setFaulting() and read with Instrecord::getFaulting().
Change-Id: I390392d59de930533eab101e96dc4d3c76500748
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30134
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
We already provide to the user the CCFLAGS_EXTRA, LDFLAGS_EXTRA
variables to pass flags to scons when compiling/linking gem5.
Those variables are not passed to the marshal object.
We add an extra pair:
MARSHAL_CCFLAGS_EXTRA, MARSHAL_LDFLAGS_EXTRA
to add flag injection capabilities to the marshal object.
The patch is also renaming base_py_env to marshal_env.
This happens for 2 reasons:
1) At the moment the marshal compilation is the only task
making use of the base python environment.
2) Consistency with the EXTRA variable names added with this patch.
I could have named them as BASE_XXFLAGS_EXTRA, but it seems too much
generic and users might be confused by that, as they might think
the BASE_XXFLAGS_EXTRA is a subset of the XXFLAGS_EXTRA so that
setting it will affect gem5 compilation as well.
Change-Id: I3e420caa897059455ff8f35462db2b38da050e93
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30016
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
