It is a simple enum to distinguish between short and big
descriptors. By moving it away from the ArmFault we can
avoid including fault.hh from mmu.hh
Change-Id: Ib556b577c62f5ea3e4c8c9e0d4560a3e99c96778
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
* enableFlag -> mde
The "enableFlag" variable, enabling the Breakpoint, Watchpoint, Vector
Catch exceptions is actually the cached version of MDSCR_EL1.MDE. The
"enableFlag" name looks too general as it's not covering the Software
Step exception case.
* bKDE -> kde
* bSDD -> sdd
The b prefix was likely referring to "breakpoint". However these bitfields
are actually used by watchpoints as well.
Change-Id: I48b762b32b2d763f4c4ceb7dcc28968cfb470fc1
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32775
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
debugExceptionReturnSS is called on an ERET instruction to
check for software step. The method was not using the
SPSR.width and it was relying on the more generic ELIs32 to
check the execution mode of the destination EL.
This is not only an efficiency problem: the helper might not work
when returning to EL0. In general it is not possible to
understand if EL0 is using AArch32 or AArch64 if the current
EL is not EL0 and EL1 is using AArch64.
This is instead visible by inspecting the spsr.width during the
execution of an ERET instruction
Change-Id: Ibc5a43633d0020139f2c0e372959a3ab4880da6e
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32634
Tested-by: kokoro <noreply+kokoro@google.com>
This patch adds Secure EL2 feature. This allows stage1
EL2/EL&0 and stage2 secure translation.
The changes are organized as follow:
+ insts/static_inst.cc: Modify checks for illegalInstruction on eret
+ isa.cc/hh: Enabling contorl bits
+ isa/insts/misc.hh/64.hh: Smc fault trigger.
+ miscregs.cc/hh: Declaration and initialization of new registers
+ self_debug.cc/hh: Add secureEL2 types for breakpoints
+ stage2_lookup.cc/hh: Allow stage2 in secure state.
+ tlb.cc/table_walker.cc: Allow secure state for stage2 and stage 1 EL2&0
translation regime
+ utility.cc/hh: New function InSecure and refactor of other helpers
to enable secure state
JIRA: https://gem5.atlassian.net/browse/GEM5-686
Change-Id: Ie59438b1828508e944334420da1d8f4745649056
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31394
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This commit implements Vector Catch exception as they are described
in Armv8 reference manual chapter G2. This exception is just for AArch32.
+ tlb.cc: Implements the entry point for vector catch in addres mode
+ faults.hh/cc: Implements the entry point for vector catch in exception trap mode.
+ miscregs.cc: enables the use of vector catch releated registers
+ miscregs_types.hh: New bitwise type for vector catch control registers.
+ types.hh: declaration of EC for vector catch exception
+ self_debug.hh/cc: Main implementation of the vector catch functions to
match address and exceptions type.
Change-Id: Idbef26b16eff059e94ff16fac13bf5708dfe647f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30618
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This commit implements SelfHosted Debug Software step as is defined in
Armv8 Reference manual chapter D2.
+ decoder.hh/cc/isa: Checks the software step bit in order to skip the instruction
before its decode.
+ faults.hh/cc: implemented SoftwareStep exception and proper modification
of spsr during the invoke of other exceptions
+ isa.cc: Set debug mask if needed during cpsr modification
+ tlb.cc: Checks if software step is in ACTIVE state to avoid trigger
breakpoint or watchpoint exception
+ self_debug.hh/cc: Implementation of State change and ss bit based during eret.
+ types.hh: Define sofware step flags like step, load or stepped to check the different flags
that triggering software step should use for the ISS code.
+ pseudo.hh/isa: Triggers the sofware step esception after decode.
+ static_inst.cc: Call debugExceptionReturnsSS durint eret routine.
Change-Id: I3a64507c64842c34c76ad7f6daa5f4306bd55d2c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30617
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change includes ArmV8 SelfDebug Watchpoint implementation
as is described in Armv8 Reference manual D2/G2
The changes specific descriptions are as follow:
+ ArmISA.py: Enable up to 16 DBGWn registers
+ isa.cc: Include in setMiscReg specific cases for DBGWCn registers enable bit
+ miscregs_types.hh: Define DBGWC bitwise types
+ miscregs.hh/cc: Definition of watchpoint registers and its initialization
+ tlb.cc: Call for watchpoint entry point on tlb translation for dtlb.
+ fault.cc/hh: Definition/implementation of Watchpoint exception and
modification on DataAbort Exception accordingly to handle
AArch32 Watchpoint exceptions.
+ types.hh: Exception Code for watchpoint.
+ self_debug.cc/hh: Watchpoint check and comparison. Definition and
implementation of all the watchpoint auxiliar functions.
Change-Id: If275e4df0d28918dd887ab78166e653da875310a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28589
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This code implementes hardware breakpoint exception as part of
software debug explained in ARMv8 reference manual ChapterD2.
+ ArmISA.py: Modify register to allow up to 15 Breakpoint registers
+ Sconscript: Add new file self_debug
+ faults.cc/hh: Defintion and implementation of HardwareBreakpoint
exception inheriting ArmFault.
+ isa.cc/hh: ArmISA contains now an attribute pointing to the SelfDebug
object that will be used to be access SelfDebug infrastructure
Added special cases for setMiscReg to cache debug enable bits.
+ miscregs.hh/cc: Definition and initialization of DBGDCn and DBGDVn
registers.
+ tlb.cc/hh: We include the access to check for breakpoint instruction as
part of the tlb translation process, checking if it comes from a
fetch in the itlb
+ types.hh: Definition of new bitwise register types.
+ utility.cc/hh: Definition and implementation of auxiliar functions for
the selfDebug.
+ self_debug.hh/cc: Main files that include the implemenattion of
breakpoint checks, selfdebug enable and auxiliar functions.
Change-Id: I0e2a4be7f778de560c512253a9148da61e3e7e7a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27967
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
