In python, the BARs had been configured using three arrays and a scalar
parameter. The arrays tracked the BAR value in the config, whether the
BAR was for a "legacy" IO range, and the size of the BAR, and the
scalar parameter was an offset for the "legacy" IO addresses to map
into the host physical address space. The nature of a BAR was implied
by its raw config space value, with each of the control bits (IO vs.
memory, 64 bit, reserved bits) encoded directly in the value.
Now, the BARs are represented by objects which have different types
depending on what type of BAR they are. There's one for IO, one for
memory, one for the upper 32 bits of a 64 bit BAR (so indices work
out), and one for legacy IO ranges. Each type has parameters which
are appropriate for it, and they're parameters are all grouped together
as a unit instead of being spread across all the previous values.
The legacy IO offset has been removed, since these addresses can be
offset like any other IO address. They can be represented naturally
in the config using their typical IO port numbers, and still be turned
into an address that gem5 will handle correctly in the back end.
Unfortunately, this exposes a problem in the config system where
a VectorParam can't be overwritten successfully one element at a time,
at least when dealing with SimObject classes. It might work with
actual SimObjects in a config, but I haven't tried it. If you were
to do that to, for instance, update the BARs for x86 so that they
used legacy IO ports for the IDE controller, it would complain that
you were trying to instantiate orphaned nodes. Replacing the whole
VectorParam with a new list of BAR objects seems to work, so that's
what's implemented in this change.
On the C++ side, BARs in the config space are treated as flat values
on reads, and are stored in the config structure associated with each
PCI device. On writes, the value is first passed to the BAR object,
and it has a chance to mask any bits which are fixed in hardware and
update its idea of what range it corresponds to in memory.
When sending AddrRanges up to the parent bus to set up routing, the
BARs generate each AddrRange if and only if their type has been
enabled in the config space command register. The BAR object which
represents the upper 32 bits of a 64 bit BAR does not claim to be
IO or memory, and so doesn't contribute a range. It communicates with
the BAR which represents the lower 32 bits, so that that BAR has the
whole base address.
Since the IO or memory BAR enable bits in the command register are now
handled by the PCI device base class, the IDE controller no longer has
to handle that manually. It does still need to keep track of whether
the bus master functionality has been enabled though, which it can
check when those registers are accessed.
There was already a mechanism for decoding addresses based on BARs
in the PCI device base class, but it was overly complicated and not
used consistently across devices. It's been consolidated, and used in
most places where it makes sense.
Finally, a few unnecessary values have been dropped from the base PCI
device's and IDE controller's checkpoint output. These were just local
copies of information already in the BARs, which in turn are already
stored along with the data in the device's config space.
Change-Id: I16d5f8cdf86d7a2d02a6b04d1f9e1b3eb1dd189d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35516
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Before, for historical reasons, the PCI host device was the default
responder on the IO bus, meaning that when there was any type of
transaction which didn't have a device to go to, it would end up
looking like a PCI config transaction. It's very unlikely that this is
what it actually was, and what would happen would be arbitrary and
probably not helpful.
Also, there was no device in place to respond to accesses in x86's IO
port address space. On a real system, these accesses just return junk
and are otherwise legal. On systems where there would be physical bus
wires they would probably return whatever the last data on the bus was.
This would have been helpful when the platform was first being set up
because it would make it obvious when the OS tried to access a device
that wasn't implemented, but there were a few cases where it would
purposefully fiddle with ports with nothing on them. These had one off
backing devices in the config which would handle the accesses
harmlessly, but if the OS changed and tried to access other ports, the
configs would need to be updated.
Now, the PCI host is just another device on the bus. It claims all of
the PCI config space addresses, so any config access, even ones which
don't go with a device, will go to it, and it can respond with all 1s
like it's supposed to.
In it's place, the default responder is now a bus. On that bus is
a device which responds to the entire IO port address range with 0s.
The default on *that* bus is a device which will mark any accesses
as bad.
With this setup, accesses which don't go to a device, including a
device on the IO port address space, will go to the IO bus's default
port. There, if the access was an IO access, it will go to the device
which replies successfully with all 0s. If not, it's marked as an
error.
The device which backs the entire IO address space doesn't conflict
with the actual IO devices, since the access will only go towards it
if it's otherwise unclaimed, and the devices on the default bus don't
participate in routing on the higher level IO bus.
Change-Id: Ie02ad7165dfad3ee6f4a762e2f01f7f1b8225168
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35515
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The System class has a few different arrays of values which each
correspond to a thread of execution based on their position. This
change collects them together into a single class to make managing them
easier and less error prone. It also collects methods for manipulating
those threads as an API for that class.
This class acts as a collection point for thread based state which the
System class can look into to get at all its state. It also acts as an
interface for interacting with threads for other classes. This forces
external consumers to use the API instead of accessing the individual
arrays which improves consistency.
Change-Id: Idc4575c5a0b56fe75f5c497809ad91c22bfe26cc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25144
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The devices which host an IntMasterPort are very specific to x86 at the
moment, but the ports don't have to be. This change moves
responsibilities around so that the x86 specific aspects are handled
in the device, and the ports themselves are ISA agnostic.
Change-Id: I50141b66895be7d8f6303605505002ef424af7fd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20827
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
There is no interrupt response message, and so no need for a function
which would construct one. The other functions which construct the
request can be consolidated since the work being done by each is
incremental. The template parameters can be used to support multiple
types and offsets in a single function, and since that function also
doesn't have to do much work, it makes sense to do everything in one
shot.
Change-Id: I41b202a263a697c5ada6817f3ab2a4728281b894
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20826
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Originally MessageReq was intended to mark a packet as a holding a
message destined for a particular recipient and which would not
interact with other packets.
This is similar to the way a WriteReq would behave if writing to a
device register which needs to be updated atomically. Also, while the
memory system *could* recognize a MessageReq and know that it didn't
need to interact with other packets, that was never implemented.
Change-Id: Ie54301d1d8820e206d6bae96e200ae8c71d2d784
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20823
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This makes the device IntSlavePort calls back into based on a template
parameter so that IntDevice doesn't have to be in the inheritance
hierarchy to use it.
It also makes IntSlavePort inherit from SimpleTimingPort directly,
skipping over MessageSlavePort.
Change-Id: Ic3213edc9c3ed5e506ee1e9f5e082cd47d7c7998
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20820
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
MemObject doesn't provide anything beyond its base ClockedObject any
more, so this change removes it from most inheritance hierarchies.
Occasionally MemObject is replaced with SimObject when I was fairly
confident that the extra functionality of ClockedObject wasn't needed.
Change-Id: Ic014ab61e56402e62548e8c831eb16e26523fdce
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18289
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.
Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.
Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
PS/2 devices are currently emulated both in the i8042 model and the
Arm KMI model. This is undesirable since it leads to code duplication.
This change introduces a common PS/2 device interface and factor out
the x86 keyboard and mouse model. A subsequent commit will implement
support for this interface in the Arm KMI model.
Change-Id: I440e83517fd9dce362fdc1676db477cc6eee5211
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/9762
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
The patch that added M5_FALLTHROUGH (5c41076bd7 misc: Updates for gcc7.2
for x86) incorrectly added breaks to the i8042 device without implementing
the correct functions. This patch implements keyboard writes, but ignores
output writes.
Information on the PS2 controller can be found at
https://wiki.osdev.org/%228042%22_PS/2_Controller
Note: Without this patch Linux 4.14 won't boot.
Change-Id: I7de137b46cef00e6c1f1c14335cb52107cd7fe5b
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/7301
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
They are now oriented around a class which makes it easy to provide
custom setter/getter functions which let you set or read bits in an
arbitrary way.
Future additions may add the ability to add custom bitfield methods,
and index-able bitfields.
Change-Id: Ibd6d4d9e49107490f6dad30a4379a8c93bda9333
Reviewed-on: https://gem5-review.googlesource.com/7201
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:
* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878
Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>
A recent serial device refactoring changed the name of the parameter
that the terminal device gets attached to on the UART. The x86 and
SPARC platform devices didn't get updated though, and were still using
the old name. This change updates those objects.
Reported-by: Kanad Basu <kanad.kut@gmail.com>
Change-Id: I0824a9df8639062d8561420ea9ffea26b8b7e2e9
Reviewed-on: https://gem5-review.googlesource.com/5781
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The gem5's current PCI host functionality is very ad hoc. The current
implementations require PCI devices to be hooked up to the
configuration space via a separate configuration port. Devices query
the platform to get their config-space address range. Un-mapped parts
of the config space are intercepted using the XBar's default port
mechanism and a magic catch-all device (PciConfigAll).
This changeset redesigns the PCI host functionality to improve code
reuse and make config-space and interrupt mapping more
transparent. Existing platform code has been updated to use the new
PCI host and configured to stay backwards compatible (i.e., no
guest-side visible changes). The current implementation does not
expose any new functionality, but it can easily be extended with
features such as automatic interrupt mapping.
PCI devices now register themselves with a PCI host controller. The
host controller interface is defined in the abstract base class
PciHost. Registration is done by PciHost::registerDevice() which takes
the device, its bus position (bus/dev/func tuple), and its interrupt
pin (INTA-INTC) as a parameter. The registration interface returns a
PciHost::DeviceInterface that the PCI device can use to query memory
mappings and signal interrupts.
The host device manages the entire PCI configuration space. Accesses
to devices decoded into the devices bus position and then forwarded to
the correct device.
Basic PCI host functionality is implemented in the GenericPciHost base
class. Most platforms can use this class as a basic PCI controller. It
provides the following functionality:
* Configurable configuration space decoding. The number of bits
dedicated to a device is a prameter, making it possible to support
both CAM, ECAM, and legacy mappings.
* Basic interrupt mapping using the interruptLine value from a
device's configuration space. This behavior is the same as in the
old implementation. More advanced controllers can override the
interrupt mapping method to dynamically assign host interrupts to
PCI devices.
* Simple (base + addr) remapping from the PCI bus's address space to
physical addresses for PIO, memory, and DMA.
This patch moves away from using M5_ATTR_OVERRIDE and the m5::hashmap
(and similar) abstractions, as these are no longer needed with gcc 4.7
and clang 3.1 as minimum compiler versions.
IntDevice::recvResponse is called from two places in current mainline: (1) the
short circuit path of X86ISA::IntDevice::IntMasterPort::sendMessage for atomic
mode, and (2) the full request->response path to and from the x86 interrupts
device (finally called from MessageMasterPort::recvTimingResp). In the former
case, the packet was deleted correctly, but in the latter case, the packet and
request leak. To fix the leak, move request and packet deletion into IntDevice
inherited class implementations of recvResponse.
The i8042 device drops the contents of a PS2 device's buffer when
serializing, which results in corrupted PS2 state when continuing
simulation after a checkpoint. This changeset fixes this bug and
transitions the i8042 model to use the new serialization API that
requires the serialize() method to be const.
Objects that are can be serialized are supposed to inherit from the
Serializable class. This class is meant to provide a unified API for
such objects. However, so far it has mainly been used by SimObjects
due to some fundamental design limitations. This changeset redesigns
to the serialization interface to make it more generic and hide the
underlying checkpoint storage. Specifically:
* Add a set of APIs to serialize into a subsection of the current
object. Previously, objects that needed this functionality would
use ad-hoc solutions using nameOut() and section name
generation. In the new world, an object that implements the
interface has the methods serializeSection() and
unserializeSection() that serialize into a named /subsection/ of
the current object. Calling serialize() serializes an object into
the current section.
* Move the name() method from Serializable to SimObject as it is no
longer needed for serialization. The fully qualified section name
is generated by the main serialization code on the fly as objects
serialize sub-objects.
* Add a scoped ScopedCheckpointSection helper class. Some objects
need to serialize data structures, that are not deriving from
Serializable, into subsections. Previously, this was done using
nameOut() and manual section name generation. To simplify this,
this changeset introduces a ScopedCheckpointSection() helper
class. When this class is instantiated, it adds a new /subsection/
and subsequent serialization calls during the lifetime of this
helper class happen inside this section (or a subsection in case
of nested sections).
* The serialize() call is now const which prevents accidental state
manipulation during serialization. Objects that rely on modifying
state can use the serializeOld() call instead. The default
implementation simply calls serialize(). Note: The old-style calls
need to be explicitly called using the
serializeOld()/serializeSectionOld() style APIs. These are used by
default when serializing SimObjects.
* Both the input and output checkpoints now use their own named
types. This hides underlying checkpoint implementation from
objects that need checkpointing and makes it easier to change the
underlying checkpoint storage code.
This patch clarifies the packet timings annotated
when going through a crossbar.
The old 'firstWordDelay' is replaced by 'headerDelay' that represents
the delay associated to the delivery of the header of the packet.
The old 'lastWordDelay' is replaced by 'payloadDelay' that represents
the delay needed to processing the payload of the packet.
For now the uses and values remain identical. However, going forward
the payloadDelay will be additive, and not include the
headerDelay. Follow-on patches will make the headerDelay capture the
pipeline latency incurred in the crossbar, whereas the payloadDelay
will capture the additional serialisation delay.
This change includes edits to Intel8254Timer to prevent counter events firing
before startup to comply with SimObject initialization call sequence.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
This change includes edits to MC146818 timer to prevent RTC events
firing before startup to comply with SimObject initialization call sequence.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
There was already a stub device at 0x80, the port traditionally used for an IO
delay. 0x80 is also the port used for POST codes sent by firmware, and that
may have prompted adding this port as a second option.
This patch changes the name of the Bus classes to XBar to better
reflect the actual timing behaviour. The actual instances in the
config scripts are not renamed, and remain as e.g. iobus or membus.
As part of this renaming, the code has also been clean up slightly,
making use of range-based for loops and tidying up some comments. The
only changes outside the bus/crossbar code is due to the delay
variables in the packet.
--HG--
rename : src/mem/Bus.py => src/mem/XBar.py
rename : src/mem/coherent_bus.cc => src/mem/coherent_xbar.cc
rename : src/mem/coherent_bus.hh => src/mem/coherent_xbar.hh
rename : src/mem/noncoherent_bus.cc => src/mem/noncoherent_xbar.cc
rename : src/mem/noncoherent_bus.hh => src/mem/noncoherent_xbar.hh
rename : src/mem/bus.cc => src/mem/xbar.cc
rename : src/mem/bus.hh => src/mem/xbar.hh
