ACPI's MADT describes the interrupt system of a processor/system and
partially replaces the Intel MP tables. The config now simply adds the
ACPI variant, so an OS can use either Intel MP or ACPI for interrupt
configuration.
Change-Id: Ie3d293aac0925666f7661a03eab10218f04c8d0c
Signed-off-by: Maximilian Stein <m@steiny.biz>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42825
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
This vestigial device provides a thin layer of indirection between
devices and the CPUs in a system. It's basically a collection of helper
functions, but since it's a SimObject it needs to be instantiated in
python and added to configurations.
Change-Id: I029d2314ae0bb890678e1e68dafcdab4bfe49beb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43347
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Before the commit, the bootloader had a hardcoded entry point that it
would jump to.
However, the Linux kernel arm64 v5.8 forced us to change the kernel
entry point because the required memory alignment has changed at:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/
commit/?h=v5.8&id=cfa7ede20f133cc81cef01dc3a516dda3a9721ee
Therefore the only way to have a single bootloader that boots both
pre-v5.8 and post-v5.8 kernels is to pass that information from gem5
to the bootloader, which we do in this patch via registers.
This approach was already used by the 32-bit bootloader, which passed
that value via r3, and we try to use the same register x3 in 64-bit.
Since we are now passing this information, the this patch also removes
the hardcoding of DTB and cpu-release-addr, and also passes those
values via registers.
We store the cpu-release-addr in x5 as that value appears to have a
function similar to flags_addr, which is used only in 32-bit arm and
gets stored in r5.
This commit renames atags_addr to dtb_addr, since both are mutually
exclusive, and serve a similar purpose, DTB being the newer recommended
approach.
Similarly, flags_addr is renamed to cpu_release_addr, and it is moved
from ArmSystem into ArmFsWorkload, since it is not an intrinsic system
property, and should be together with dtb_addr instead.
Before this commit, flags_addr was being set from FSConfig.py and
configs/example/arm/devices.py to self.realview.realview_io.pio_addr
+ 0x30. This commit moves that logic into RealView.py instead, and
sets the flags address 8 bytes before the start of the DTB address.
JIRA: https://gem5.atlassian.net/browse/GEM5-787
Change-Id: If70bea9690be04b84e6040e256a9b03e46710e10
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35076
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This is specialized per arch, and the Workload class is the only thing
actually using it. It doesn't make any sense to dispatch those calls
over to the System object, especially since that was, in most cases,
the only reason an ISA specific system class even still existed.
After this change, only ARM still has an architecture specific System
class.
Change-Id: I81b6c4db14b612bff8840157cfc56393370095e2
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24287
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This generalized Workload SimObject is not geared towards FS or SE
simulations, although currently it's only used in FS. This gets rid
of the ARM specific highestELIs64 property (from the workload, not the
system) and replaces it with a generic getArch.
The old globally accessible kernel symtab has been replaced with a
symtab accessor which takes a ThreadContext *. The parameter isn't used
for anything for now, but in cases where there might be multiple
symbol tables to choose from (kernel vs. current user space?) the
method will now be able to distinguish which to use. This also makes
it possible for the workload to manage its symbol table with whatever
policy makes sense for it.
That method returns a const SymbolTable * since most of the time the
symbol table doesn't need to be modified. In the one case where an
external entity needs to modify the table, two pseudo instructions,
the table to modify isn't necessarily the one that's currently active.
For instance, the pseudo instruction will likely execute in user space,
but might be intended to add a symbol to the kernel in case something
like a module was loaded.
To support that usage, the workload has a generic "insertSymbol" method
which will insert the symbol in the table that "makes sense". There is
a lot of ambiguity what that means, but it's no less ambiguous than
today where we're only saved by the fact that there is generally only
one active symbol table to worry about.
This change also introduces a KernelWorkload SimObject class which
inherits from Workload and adds in kernel related members for cases
where the kernel is specified in the config and loaded by gem5 itself.
That's the common case, but the base Workload class would be used
directly when, for instance, doing a baremetal simulation or if the
kernel is loaded by software within the simulation as is the case for
SPARC FS.
Because a given architecture specific workload class needs to inherit
from either Workload or KernelWorkload, this change removes the
ability to boot ARM without a kernel. This ability should be restored
in the future.
To make having or not having a kernel more flexible, the kernel
specific members of the KernelWorkload should be factored out into
their own object which can then be attached to a workload through a
(potentially unused) property rather than inheritance.
Change-Id: Idf72615260266d7b4478d20d4035ed5a1e7aa241
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24283
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The main applications are to run baremetal programs and initramfs Linux
kernel.
Before this patch, disks() calls in makeArmSystem would throw:
IOError: Can't find file 'linux-aarch32-ael.img' on M5_PATH.
In order to achieve this, this commit also removes the default hardcoded
disk image basenames.
For example, before this commit, running without a --disk-image in X86
would automatically search for an image with basename x86root.img in
M5_PATH, which means we would either have to ignore any disk image error,
or else running without disk images would fail.
After this commit, you would have to pass --disk-image x86root.img to
achieve the old behaviour.
Change-Id: I0ae8c4b3b93d0074fd4fca0d5ed52181c50b6c04
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27867
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
This simplifies the SPARC FS workload significantly, and removes
assumptions about what ROMs exist, where they go, etc. It removes
other components from the loop which don't have anything to contribute
as far as setting up the ROMs.
One side effect of this is that there isn't specialized support for
adding PC based events which would fire in the ROMs, but that was never
done and the files that were being used were flat binary blobs with no
symbols in the first place.
This also necessitates building a unified image which goes into the single
8MB ROM that is located at address 0xfff0000000. That is simply done
with the following commands:
dd if=/dev/zero of=t1000_rom.bin bs=1024 count=8192
dd if=reset_new.bin of=t1000_rom.bin
dd if=q_new.bin of=t1000_rom.bin bs=1024 seek=64
dd if=openboot_new.bin of=t1000_rom.bin bs=1024 seek=512
This results in an 8MB blob which can be loaded verbatim into the ROM.
Alternatively, and with some extra effort, an ELF file could be
constructed which had each of these components as segments, offset to the
right location in the ELF header. That would be slightly more work to set up,
but wouldn't waste space on regions of the image that are all zeroes.
Change-Id: Id4e08f4e047e7bd36a416c197a36be841eba4a15
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27268
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Since I02919207d6f175854017ae7b603d811da63d618e the fs.py --bootloader
option can be used to select a bootloader explicitly.
Ia3d863db276a023b6a2c7ee7a656d8142ff75589 forgot to pass that parameter
likely due to a rebase issue and it gets searched in M5_PATH.
Change-Id: Ic4cf3ccf041e1c34eac7753424fe842bd34a77f9
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26724
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Information about what kernel to load and how to load it was built
into the System object and its subclasses. That overloaded the System
object and made it responsible for too many things, and also was
somewhat awkward when working with SE mode which doesn't have a kernel.
This change extracts the kernel and information related to it from the
System object and puts into into a OsKernel or Workload object.
Currently the idea of a "Workload" to run and a kernel are a bit
muddled, an unfortunate carry-over from the original code. It's also an
implication of trying not to make too sweeping of a change, and to
minimize the number of times configs need to change, ie avoiding
creating a "kernel" parameter which would shortly thereafter be
renamed to "workload".
In future changes, the ideas of a kernel and a workload will be
disentangled, and workloads will be expanded to include emulated
operating systems which shephard and contain Process-es for syscall
emulation.
This change was originally split into pieces to make reviewing it
easier. Those reviews are here:
https: //gem5-review.googlesource.com/c/public/gem5/+/22243
https: //gem5-review.googlesource.com/c/public/gem5/+/24144
https: //gem5-review.googlesource.com/c/public/gem5/+/24145
https: //gem5-review.googlesource.com/c/public/gem5/+/24146
https: //gem5-review.googlesource.com/c/public/gem5/+/24147
https: //gem5-review.googlesource.com/c/public/gem5/+/24286
Change-Id: Ia3d863db276a023b6a2c7ee7a656d8142ff75589
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26466
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
All ISAs except SPARC can now take multiple disk images by passing
the --disk-image option multiple times.
Before this patch, several ISAs automatically mounted a secondary disk
called "linux-bigswap2.img", which had to be in M5_PATH even if the end
user did not want more than one disk. This was the case for for example
for X86 but not ARM.
This change was done to:
* allow ARM to have a second disk image in fs.py, which was not possible,
and allow other ISAs like X86 and ARM to take any number of disk images
* provide a simpler, more intuitive CLI interface that does not require
magic disk images to be present in M5_PATH to work for ISAs such as X86.
Linux does not need that secondary image to boot correctly, so it is
more friendly to support a minimal setup that requires the least amount
of binaries to boot, and let supply the second image manually only if
they need it.
* make fs.py --disk-image work more similarly across all ISAs
SPARC was left with a single disk only because its setup was a bit more
complex and would require further testing.
Change-Id: I8b6e08ae6daf0a5b6cd1d57d285a9677f01eb7ad
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23671
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
9p allows the guest Linux kernel to mount a host directory into the guest.
This allows to very easily modify test programs after a run at the end of
boot, without the need to re-insert the changes into a disk image.
It is enabled on both fs.py and fs_bigLITTLE.py with the --vio-9p
option.
Adapted from code originally present on the wiki: http://gem5.org/WA-gem5
As documented in the CLI option help, the current setup requires the guest
to know the full path to the host share, which is annoying, but overcoming
that would require actually parsing a bit of the protocol rather than just
forwarding everything to diod.
Change-Id: Iaeb1ed185dccfa8332fe6657a54e7550f64230eb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22831
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch is pulling the on-chip memory outside of the on_chip_devices
list.
The external interface will be more or less the same: configuration
scripts will still use the attachOnChipIO method; a new kw argument has
been added in order to store mem_ports.
We want to provide to on-chip memory the same mechanism used when
collecting on-chip dma ports. This is needed when using Ruby, since
we need to pass a non None mem_ports to prevent the bootmem to be
wired to the bus.
Change-Id: Ifc519c3072dc5de1530772c70c80dc2094e2c54c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22000
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Kernel was being set using a placeholder and then assigned the
correct value. This would generate the following error if the
placeholder file did not exist:
'IOError: Can't find file <placeholder> on path'
This patch follows the same directions of commit
12eca7ac04 and removes the default
values, forcing the user to properly configure the kernel.
Change-Id: I0eb45d12eda6b6efe9a3fe118996b640844a7b34
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/11850
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Python 2.7 used to return lists for operations such as map and range,
this has changed in Python 3. To make the configs Python 3 compliant,
add explicit conversions from iterators to lists where needed, replace
xrange with range, and fix changes to exec syntax.
This change doesn't fix import paths since that might require us to
restructure the configs slightly.
Change-Id: Idcea8482b286779fc98b4e144ca8f54069c08024
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16002
Reviewed-by: Gabe Black <gabeblack@google.com>
Before this commit, there were default magic DTB and kernel filenames
for some platforms.
This was inelegant and error prone, as it refered to out-of-tree files,
and set defaults which users almost always want to customize with
explicit command line options.
One result of this is that a wrong exception could be thrown if --kernel
was given but not --machine-type, since the default machine type
VExpress_EMM had a default kernel, and the code would always search for
the default filename even though --kernel was given:
IOError: Can't find file 'vmlinux.aarch32.ll_20131205.0-gem5' on path.
The defaults existed only for older machine types, and not for the
usually recommended VExpress_GEM5_V1, which suggests that this
deprecation should not affect many users.
Change-Id: Ia49298304f658701ea0800bd79e08db404a655c3
Reviewed-on: https://gem5-review.googlesource.com/c/15898
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This is an old platform, and we haven't had official Linux kernel configs
for it in a while, so we've decided to deprecate it.
Furthermore, trying to use it fails with:
object 'RealViewEB' has no attribute 'pci_host'
and the last commit in the class happened two years ago, which indicates
that no one has been using it.
Change-Id: Icc674b00b152eb3246e05141dbaf2624cc720f21
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12471
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
fs.py in baremetal mode currently fails for the VExpress_GEM5_V1 platform
due to inconsistent UART naming with error message:
AttributeError: object 'VExpress_GEM5_V1' has no attribute 'uart'
Consistently name keep all UARTs in the Arm platforms in a vector named
'uart' or as a single device named 'uart'. Update the configuration
scripts to reflect the fact that 'uart' can be a vector.
Change-Id: I20b8dbac794d6a9be19b6ce8c335a097872132fb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12473
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Prior to this changeset the bootloader rom (instantiated as a
SimpleMemory) in ruby Arm systems was treated as an IO device and it
was fronted by a DMA controller. This changeset moves the bootloader
rom and adds it to the system as another memory with a dedicated
directory controller.
Change-Id: I094fed031cdef7f77a939d94f948d967b349b7e0
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Equips the fs.py config routine with an extra commandline option
--generate-dtb that will generate a dtb file automatically before
running the simulation. Only works with ARM systems and gives a warning
if the simulated system is not of --machine-type VExpress_GEM5_V1.
Change-Id: I7766e5459fd9bec2245de83cef103091ebaf7229
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5968
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Ruby for ARM systems is not fully supported but certain configurations
are expected to work. This change removes the more general fail
statement and warns or fails depending on the particular
configuration.
Change-Id: Ic24799aff966ba15858b93482e0f24a8672d9483
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2905
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
This patch breaks out the most basic configuration options into a set
of base options, to allow them to be used also by scripts that do not
involve any ISA, and thus no actual CPUs or devices.
The patch also fixes a few modules so that they can be imported in a
NULL build, and avoid dragging in FSConfig every time Options is
imported.
Ruby on ARM is currently very experimental. Fail with a fatal error
that explains this to make sure users are aware of the limitations (it
doesn't actually work yet!).
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Add initial support for creating an ARM system with a Ruby-based
memory system. This support is currently experimental and limited to
the new VExpress_GEM5_V1 platform.
Change-Id: I36baeb68b0d891e34ea46aafe17b5e55217b4bfa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brad Beckmann <brad.beckmann@amd.com>
At the moment the SPARC FS machine configuration comes with a hardcoded
value for using the Solaris 10 disk image from the OpenSPARC tarball. The
--disk-image option is completely ignored for SPARC. This simple patch
modifies the behavior so that --disk-image option is both taken into
account and also required. This makes it possible to easily change SPARC FS
images without having to modify the configuration files.
According to the Intel Multi Processor Specification rev 1.4 (-006) (*),
section 4.3.2 Bus Entries, Bus type strings are >>6-character ASCII
(blank-filled) strings<<.
This patch properly pads the entries with the missing spaces at the end.
(*) http://www.intel.com/design/pentium/datashts/24201606.pdf
Committed by Jason Lowe-Power <power.jg@gmail.com>
Add a platform with support for both aarch32 and aarch64. This
platform implements a subset of the devices in a real Versatile
Express and extends it with some gem5-specific functionality. It is in
many ways similar to the old VExpress_EMM64 platform, but supports the
following new features:
* Automatic PCI interrupt assignment
* PCI interrupts allocated in a contiguous range.
* Automatic boot loader selection (32-bit / 64-bit)
* Cleaner memory map where gem5-specific devices live in CS5 which
isn't used by current Versatile Express platforms.
* No fake devices. Devices that were previously faked will be
removed from the device tree instead.
* Support for 510 GiB contiguous memory
