We now explicitly check in both the cache and the MSHRs if writes are
masked or not before promoting to a whole-line write. Failure to do
this previously was resulting in data loss when dirty data was present
in lower level caches and a coincidentally aligned and
cache-line-sized masked write occured.
Change-Id: I9434590d8b22e4d993167d789eb9d15a2e866bf1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/64340
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
An example case,
```python
mem_side_port = RequestPort(
"This port sends requests and " "receives responses"
)
```
This is the residue of running the python formatter.
This is done by finding all tokens matching the regex `"\s"(?![.;"])`
and manually replacing them by empty strings.
Change-Id: Icf223bbe889e5fa5749a81ef77aa6e721f38b549
Signed-off-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/66111
Reviewed-by: Bobby Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The description explains when we have to set this True (when a
downstream cache acts as a victim cache). Also, it describes general
(default) setup, but this seems inaccurate and not consistent with
default vaule.
Change-Id: I389adb0af0d6421e8a9672c4cf5d23510eb38242
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/62832
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
To find a candidate in cache base.cc, function getPacket
is called. In case of multi-prefetchers, we alyways start
from the first prefetcher. Given the default value for "latency"
is 1, there is always a candidate ready for prefech by prefetcher 0.
Hence, we need an arbitration mechansim to cycle through
all prefechers. To make this fair, we added a variable to save what
prefetcher first used to get a packet from, and in the next round,
we start from the next prefetcher to give every prefetcher a chance
to be the first one in a round-robin fashion.
JIRA Ticket: https://gem5.atlassian.net/browse/GEM5-1169
Change-Id: I1c6a267b2bf71764559a080371c1d7f8be95ac71
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/56265
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>
Remove the line "For use for simulation and test purposes only" in files
were AMD is the only copyright holder listed in the header. This happens
to be the case for all files where this line exists, removing it
completely from gem5.
Change-Id: I623f266b002f564301b28774f49081099cfc60fd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/53943
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
When calling a method in a superclass, you can/should use the super()
method to get a reference to that class. The python 2 version of that
method takes two parameters, the current class name, and the "self"
instance. The python 3 version takes no arguments. This is better for a
at least three reasons.
First, this version is less verbose because you don't have to specify
any arguments.
Second, you don't have to remember which argument goes where (I always
have to look it up), and you can't accidentally use the wrong class
name, or forget to update it if you copy code from a different class.
Third, this version will work correctly if you use a class decorator.
I don't know exactly how the mechanics of this work, but it is referred
to in a comment on this stackoverflow question:
https://stackoverflow.com/questions/681953/how-to-decorate-a-class
Change-Id: I427737c8f767e80da86cd245642e3b057121bc3b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/52224
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The constructor only initialized two fields, data and _tickInserted. The
print() method at least accesses the coherence status bits, which
valgrind determined were being accessed without being initialized.
This change adds a default initializer to all fields to prevent any
value from flapping around uninitialized.
Change-Id: Ie4c839504d49f9a131d8e3c3e8be02ff22f453a6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/52404
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The BaseCache::handleFill function would generate an "old_state" string
unconditionally, just in case it would need to print it out later on in
the function if the Cache debug variable was set. This is very wasteful.
We should only generate that string if we are actually going to use it
later on.
Change-Id: I4a570d1cd2814e5a089eac1233dedd1801d68975
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/52405
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This parameter is used to figure out if two addresses are on the same or
different pages, and could be used to find what page they were on and
the page offset, although it doesn't look like the later two are
actually used.
This value could possibly come from the TLB parameter attached to the
prefetcher, but making it explicit makes these more symmetric with the
Ruby prefetcher, and reduces the complexity of the TLB implementation.
Change-Id: I6921943c49af19971b84225ecfd1127304363426
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/50352
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
As prefetcher can use VA and need translation, it is
interesting to see both VA and PA when printing the queues.
PA is printed as 0 if translation has not happened yet.
Also fix a bug when the pkt is not yet created.
Change-Id: I7cd225379c2930a8d6a7882efdb3dc7bc49fb8a3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/48683
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Daniel Carvalho <odanrc@yahoo.com.br>
Now that we're using c++17, the type_traits with a ::value member have
a _v alias which reduces verbosity. Or on other words
std::is_integral<T>::value
can be replaced with
std::is_integral_v<T>
Make this substitution throughout the code base. In places where gem5
introduced it's own similar templates, add a V alias, spelled
differently to match gem5's internal style.
gem5: :IsVarArgs<T>::value => gem5::IsVarArgsV<T>
Change-Id: I1d84ffc4a236ad699471569e7916ec17fe5f109a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/48604
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Add an accuracy and coverage stat for the prefetchers.
Accuracy is defined as the ratio of the number of prefetch
request that have been counted as useful over the number
of prefetch request issued.
Accuracy tells whether the prefetcher is producing useful
requests or not.
Coverage is defined as the ratio of of the number of prefetch
request that have been counted as useful over the number of
demand misses if there was no prefetch, which is counted as
the number of useful prefetch request plus the remaining
demand misses. Due to the way stats are defined in the cache,
I have to add a stat to count the number of remaining demand
misses directly in the prefetcher stat. Demand is defined
as being one of this request type: ReadReq, WriteReq,
WriteLineReq, ReadExReq, ReadCleanReq, ReadSharedReq.
Coverage tells what part of misses are covered by the prefetcher.
Change-Id: I3bb8838f87b42665fdd782889f6ba56ca2a802fc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/47603
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>
Count how many time a prefetch is useful, meaning
a hit has happened on a prefetched cache block.
Another stat (pfUsefulButMiss) has been added to count
the special case where there is a hit on prefetched block
but it is counted as a miss because the block is not in
the requested coherency state.
Change-Id: I253216b9ac96d5f21139b710c489d6eb3fce7136
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/47602
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>
