Newer compilers error on -Warray-length in the recent MI200 patches due
to casting from a 32-bit data type to a 64-bit type. Change it to cast
the 32-bit integer first then 64-bit integer latter to remove the
warning.
Rerun of validation tests on the three instructions passed.
Change-Id: I0309e5f7b5b8cc8ce1651660ddddb120fa6e7666
Currently, the TLB enforces that the bit 63 of a physical address to be
zero. This check stems from the riscv-tests that checks for the bit 63
of a physical address [1]. This is due to the fact that the ISA
implicitly says that the physical address must be zero-extended on the
most significant bits that are not translated [2]. More details on this
issue is here [3].
The check for bit 63 of a physical address in the TLB is rather too
specific, and I believe the check of invalid physical address is alread
implemented in PMA. Thus, this change proposes to remove this check from
RISC-V TLB.
[1]
bd0a19c136/isa/rv64mi/access.S (L18)
[2] https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/8kO7X0y4ubo
[3] https://github.com/gem5/gem5/issues/238
Change-Id: I247e4d4c75c1ef49a16882c431095f6e83f30383
Signed-off-by: Hoa Nguyen <hn@hnpl.org>
The PMAChecker and PMP are only used in the RisvISA and it should be in
the RiscvISA to simply the implementation
Change-Id: I4968e2de4c028cb2dceed977f2173fc8b1efd175
The RFC is defaulted to a size of 0 which removes it completely. To use
the RFC set the --register-file-cache-size to a non-zero multiple of
two. In addition, rfc_pipe_length may be altered to increase or decrease
RFC latency benefit.
The RFC is defaulted to a size of 0 which removes it completely. To use
the RFC set the --register-file-cache-size to a non-zero multiple of
two. In addition, rfc_pipe_length may be altrered to increase or
decrease RFC latency benefit.
Change-Id: I6f5bf5b750eb64155fbc8c8343e9feadce5c9f79
This patch is amending encodeAArch64SysReg so that it covers the case
where there are no arch numbers available for the misc index passed as
an argument.
This could happen if the register ID is a gem5 pseudo register which is
not associated with any architected op1/op2/crn/crm tuple.
Rather than panicking we return a nullopt.
Change-Id: I7ab70467105ef93c0c78ac4e999c7dc8e5e09925
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Implemented according to the ISA spec. Validated with silion. In
particular the sign extend is important for the signed variants and the
unsigned variants seem to overflow lanes (hence why there is no mask()
in the unsigned varints. FP16 -> FP32 continues using ARM's fplib.
Tested vs. an MI210. Clamp has not been verified.
Change-Id: Ifc09aecbc1ef2c92a5524a43ca529983018a6d59
Starting with MI200, packed math can operate on double dword inputs. In
this case, 64-bits of inputs (two VGPRs per lane) contain two FP32
values.
Add instructions to perform add, multiply, and FMA on packed FP32 types.
Change-Id: Ib838bff91a10e02e013cc7c33ec3d91ff08647b0
This change adds all of the missing flat/global atomics up to including
the new atomics in gfx90a (MI200). Adds all decodings and instruction
implementations with the exception of __half2 which does not have a
corresponding data type in gem5. This refactors the execute() and
completeAcc() methods by creating helper functions similar to what
initiateAcc() uses. This reduces redundant code for global atomic
instruction implementations.
Validated all except PK_ADD_F16, ADD_F32, and ADD_F64 which will be done
shortly. Verified the source/dest register sizes in the header are
correct and the template parameters for the new execute()/completeAcc()
methods are correct.
Change-Id: I4b3351229af401a1a4cbfb97166801aac67b74e4
The AMDKernelCode struct is very outdated. Most of the fields are no
longer used and have been replaced with new fields that are used.
Therefore in order to support the new fields the code object needs to be
updated. The new structure is based on the table located at
https://llvm.org/docs/AMDGPUUsage.html#code-object-v3-kernel-descriptor
Most notably this adds the new compute_pgm_rsrc3 and kernarg preload
fields which are new features in gfx90a (MI200). The accum_offset in
compute_pgm_rsrc3 and kergarg preload values are necessary to run
application which enable those features and therefore a way to check
their values is needed.
Also noteable is the removal of enable_sgpr_workgroup_id_{X,Y,Z}. These
seem to be unused in all versions of ROCm that gem5 supports and
therefore these fields can be removed. They are replaced with a reserved
field in the new code object.
Change-Id: I5542442e1e5961b05e17affad0adb5186d6d9d1a
Use the opSelectorToRegSym which will print the full range of VGPRs
(e.g., will now print v[2:3] instead of v2 when the source / dest is
64-bits). Fixes atomic disassembly prints. Now shows "glc" if GLC bit is
enabled. Fixes some VGPR fields being printed as an SGPR in places where
the 9-bit register index bit is implied (e.g., VDST).
This makes it easier to use a GPUExec trace to match with LLVM
disassembly when debugging.
Change-Id: Ia163774850f0054243907aca8fc8d0361e37fdd5
This adds the VOP3P and VOP3P_MAI encodings from the MI200 spec. These
instructions are used for packed math and miSIMD instructions. The first
19 VOP3P opcodes are implemented and validated against hardware. This
includes all instructions which operate on one dword containing two
packed 16-bit values of fp16, int16_t, or uint16_t.
Implement one MFMA instruction for now which was also validated against
hardware.
This is useful in other ISAs to implement FP16 computation. For example,
it can be used in the GPU model. The ARM specific misc register is
ignored in that case.
Change-Id: I339ac0ccd9be4371b0f220ad99068e5e12b3d263
This initialization method is used in gfx90a (MI200). Rather than using
three VGPRs for X,Y,Z dimensions of the kernel, pack them into one
register with 10-bits for each dimensions.
Change-Id: I8e5b681c8287779ff9f80451d6028e862322294a
The version is necessary for determining the correct ABI init process.
Add it to the task queue so it is accessible when doing ABI init.
Change-Id: If77434b0f93614057b5c40fcf612d59b54e05dbb
- The bytesRead and bytesWritten stat had duplicate names. Updated
bytesRead and bytesWritten for dram_interface and nvm_interface
Change-Id: I7658e8a0d12ef6b95819bcafa52a85424f01ac76
- The bytesRead and bytesWritten stat had duplicate names. Updated
bytesRead and bytesWritten for dram_interface and nvm_interface
Change-Id: I7658e8a0d12ef6b95819bcafa52a85424f01ac76
The WriteUniqueZero is an immediate write to a Snoopable address region
that does not require any data transfer (cacheline is zeroed)
Change-Id: Ia8c9b40e08a3b7d613f0b62ce0ac4b0547860871
Reviewed-by: Tiago Muck <tiago.muck@arm.com>
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Note: A bug was identified in that the one of the special file paths,
namely /proc/meminfo contained an extra trailing /, implicitly making
the incorrect assumption that meminfo was a directory, when it is, in
fact, a (pseudo-)file. This was causing application in SE mode to fail
opening the meminfo pseudo-file with errno 13. This commit fixes this
issue.
Change-Id: I93fa81cab49645d70775088f1e634f067b300698
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Note: A bug was identified in that the one of the special file paths,
namely /proc/meminfo contained an extra trailing /, implicitly making
the incorrect assumption that meminfo was a directory, when it is, in
fact, a (pseudo-)file. This was causing application in SE mode to fail
opening the meminfo pseudo-file with errno 13. This commit fixes this
issue.
Change-Id: I93fa81cab49645d70775088f1e634f067b300698
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Stash requests will simply be discarded by the Home Node This will
return a CompI response to the RNF
Change-Id: I9c2ce5d4d42f380d1a554933d381cf8a8590ba22
Reviewed-by: Tiago Muck <tiago.muck@arm.com>
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Correct the instruction flags of RISC-V vector store instructions, such
as `vse64_v`, `vse32_v`. The `vse64_v` in `decoder.isa` is
`Mem_vc.as<uint64_t>()[i] = Vs3_ud[i];` and it will generate the code
`Mem.as<uint64_t>()[i] = Vs3[i];`. The current regex of assignRE only
mark the operand `Mem` as `dest` only if meet the formats like `Mem = Rd`
or `Mem[i] = Rd` because the code ` = Rd` or `[i] = Rd` match the
`assignRE` respectively. For the expression `Mem.as<uint64_t>()[i]`,
the operand `Mem` will falsely mark the operand as `src` because the
code `.as<uint64_t>()[i]` is not match the `assignRE`.
The PR will ensure the operand `Mem` is dest for the format like
`Mem.as<xxx>()[i] = yyy`.
Change-Id: I9c57986a64f1efb81eb9c7ade90712b118e0788d
Due to a change introduced in https://github.com/gem5/gem5/pull/625, a
gem5 resource will not download any external files until
`get_local_path()` is called. In the construction of the Looppoint
Resources this function was not called, the `local_path` variable was
called directly. As such, an error occured.
The downside of this fix is the Looppoint resources external files are
downloaded when `obtain_resource` is called, thus the bandwidth savings
introduced with https://github.com/gem5/gem5/pull/625 will not occur for
Looppoint resources. However, https://github.com/gem5/gem5/issues/644
proposes a fix which would supercede the
https://github.com/gem5/gem5/pull/625 solution.
Change-Id: I52181382a03e492ec1cb58b01e71bc4820af9ccc
The value of a `WorkloadResource`'s additional parameter may not always
be a string. It can be any JSON value (integer, a list, a dict, ect.).
For Looppoint resources we have additional parameters such as a List of
region start points.
The assert inside workloads checking the type of the value breaks
certain usecase and is therefore removed in this commit.
Change-Id: Iecb1518082c28ab3872a8de888c76f0800261640
