Other scripts (like se.py) blindly try to apply the indirect predictor
if one is set. Because this option defaults to something, there's no
way (as far as I know) to purposefully select nothing, and so the
simulator crashes. Users shouldn't have to proactively prevent gem5
from killing itself regardless, so the default was changed to "None".
Change-Id: Ic3382b8065442d6705b1c6a656646598d9d5c322
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23360
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
9p allows the guest Linux kernel to mount a host directory into the guest.
This allows to very easily modify test programs after a run at the end of
boot, without the need to re-insert the changes into a disk image.
It is enabled on both fs.py and fs_bigLITTLE.py with the --vio-9p
option.
Adapted from code originally present on the wiki: http://gem5.org/WA-gem5
As documented in the CLI option help, the current setup requires the guest
to know the full path to the host share, which is annoying, but overcoming
that would require actually parsing a bit of the protocol rather than just
forwarding everything to diod.
Change-Id: Iaeb1ed185dccfa8332fe6657a54e7550f64230eb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22831
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This is the second step towards being able to run dynamically linked
applications when the guest ISA != than host ISA.
Once the guest interpreter is loaded to memory, we are able to redirect
shared object loads through the redirectPath interface.
How do we load the guest interpreter?
The elf file is for example asking for the /lib/ld-linux-aarch64.so
interpreter.
That would point to a valid dynamic linker/loader if guest ISA == host
ISA, but if we are running on X86 we should point to the guest
(aarch64 in the example) toolchain wherever it is installed.
This patch is adding the --interp-dir option to point to the parent
folder of the guest /lib in the host fs.
Change-Id: Id27b97c060008d2e847776a49323d45c8809a27f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23066
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This is the first step towards being able to run dynamically linked
applications when the guest ISA != than host ISA.
(Like running a arm application on x86)
By using the --redirects command line option it is possible to specify
via CLI a set of path redirections to be used in SE mode.
This is needed when running a dynamically linked binary in
SE mode in a guest ISA different than the host. The linker will look
for SOs (e.g. libc.so) in /lib/, but will only find the host libraries.
With this option we can redirect to the guest toolchain/file system.
Usage:
gem5.opt [example script]
--redirects /dir1=/path/to/host/dir1 \
--redirects /dir2=/path/to/host/dir2
Change-Id: I558838be2ad6802891707e9a1cc454786859db15
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23065
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Typically, a memory controller is assigned an address range of the
form [start, end). This address range might be interleaved and
therefore only a non-continuous subset of the addresses in the address
range is handed by this controller.
Prior to this patch, the DRAM controller was unaware of the
interleaving and as a result the address range could affect the
mapping of addresses to DRAM ranks, rows and columns. This patch
changes the DRAM controller, to transform the input address to a
continuous range of the form [0, size). As a result the DRAM
controller always operates on a dense and continuous address range
regardlesss of the system configuration.
Change-Id: I7d273a630928421d1854658c9bb0ab34e9360851
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/19328
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch is pulling the on-chip memory outside of the on_chip_devices
list.
The external interface will be more or less the same: configuration
scripts will still use the attachOnChipIO method; a new kw argument has
been added in order to store mem_ports.
We want to provide to on-chip memory the same mechanism used when
collecting on-chip dma ports. This is needed when using Ruby, since
we need to pass a non None mem_ports to prevent the bootmem to be
wired to the bus.
Change-Id: Ifc519c3072dc5de1530772c70c80dc2094e2c54c
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22000
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adding an option to enable DRAM low-power states. The low power
states can have a significant impact on application performance
(sim_ticks) on the order of 2-3x, especially for compute-gpu apps.
The options allows for it to easily be enabled/disabled to compare
performance numbers. The option is disabled by default.
Change-Id: Ib9bddbb792a1a6a4afb5339003472ff8f00a5859
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18548
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch updates the FileSystemConfig so it works with more kinds of
config scripts (e.g., the Learning gem5 scripts).
There are 4 main changes:
- Added system as a parameter to the config_filesystem function so the
function can search the system for the number of CPUs instead of relying
on options from Options.py
- Instead of calling redirect_paths everywhere config_filesystem is
used, now it is implicitly called.
- Cleaned up the Ruby scripts a bit to remove redundant calls to
config_filesystem
- Added a config_filesystem call to the Ruby Learning gem5 script
(currently the only Learning gem5 script that requires it).
In the future, I think it would be better to move the config_filesystem
call into simulate.py, probably into the instantiate function. I tried to
use the per-CPU configuration parameters instead of options from
Options.py, but that's not possible until after the SimObject params
have been finalized in instantiate.
Change-Id: Ie6501a7435cfb3ac9d2b45be3722388b34063b1e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18848
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>
This change introduces the concept of a faux-filesystem.
The faux-filesystem creates a directory structure in m5out
(or whatever output dir the user specifies) where system calls
may be redirected.
This is useful to avoid non-determinism when reading files
with varying path names (e.g., variations from run-to-run if
the simulation is scheduled on a cluster where paths may change).
Also, this changeset allows circumventing host pseudofiles which
have information specific to the host processor (such as cache
hierarchy or processor information). Bypassing host pseudofiles
can be useful when executing runtimes in the absence of an
operating system kernel since runtimes may try to query standard
files (i.e. /proc or /sys) which are not relevant to an
application executing in syscall emulation mode.
Change-Id: I90821b3b403168b904a662fa98b85def1628621c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12119
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Kernel was being set using a placeholder and then assigned the
correct value. This would generate the following error if the
placeholder file did not exist:
'IOError: Can't find file <placeholder> on path'
This patch follows the same directions of commit
12eca7ac04 and removes the default
values, forcing the user to properly configure the kernel.
Change-Id: I0eb45d12eda6b6efe9a3fe118996b640844a7b34
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/11850
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Python 2.7 used to return lists for operations such as map and range,
this has changed in Python 3. To make the configs Python 3 compliant,
add explicit conversions from iterators to lists where needed, replace
xrange with range, and fix changes to exec syntax.
This change doesn't fix import paths since that might require us to
restructure the configs slightly.
Change-Id: Idcea8482b286779fc98b4e144ca8f54069c08024
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16002
Reviewed-by: Gabe Black <gabeblack@google.com>
Before this commit, there were default magic DTB and kernel filenames
for some platforms.
This was inelegant and error prone, as it refered to out-of-tree files,
and set defaults which users almost always want to customize with
explicit command line options.
One result of this is that a wrong exception could be thrown if --kernel
was given but not --machine-type, since the default machine type
VExpress_EMM had a default kernel, and the code would always search for
the default filename even though --kernel was given:
IOError: Can't find file 'vmlinux.aarch32.ll_20131205.0-gem5' on path.
The defaults existed only for older machine types, and not for the
usually recommended VExpress_GEM5_V1, which suggests that this
deprecation should not affect many users.
Change-Id: Ia49298304f658701ea0800bd79e08db404a655c3
Reviewed-on: https://gem5-review.googlesource.com/c/15898
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The option allows to set SimObject params from the CLI.
The existing config scripts have a large number of options that simply set
a single SimObject parameter, and many still are not exposed.
This commit allows users to pass arbitrary parameters from the command
line to prevent the need for this kind of trivial option.
Change-Id: Ic4bd36948aca4998d2eaf6369c85d3668efa3944
Reviewed-on: https://gem5-review.googlesource.com/c/12985
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This is an old platform, and we haven't had official Linux kernel configs
for it in a while, so we've decided to deprecate it.
Furthermore, trying to use it fails with:
object 'RealViewEB' has no attribute 'pci_host'
and the last commit in the class happened two years ago, which indicates
that no one has been using it.
Change-Id: Icc674b00b152eb3246e05141dbaf2624cc720f21
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/12471
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
fs.py in baremetal mode currently fails for the VExpress_GEM5_V1 platform
due to inconsistent UART naming with error message:
AttributeError: object 'VExpress_GEM5_V1' has no attribute 'uart'
Consistently name keep all UARTs in the Arm platforms in a vector named
'uart' or as a single device named 'uart'. Update the configuration
scripts to reflect the fact that 'uart' can be a vector.
Change-Id: I20b8dbac794d6a9be19b6ce8c335a097872132fb
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12473
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The AtomicSimpleCPU used to be able to access memory directly to speed
up simulation if no caches are used. This is fine as long as no
switching between CPU models is required. In order to switch to a new
CPU model that requires caches, we currently need to checkpoint the
system and restore it into a new configuration. The new
'atomic_noncaching' memory mode provides a solution that avoids this
issue since caches are bypassed in this mode. This changeset removes
the old fastmem option from the AtomicSimpleCPU and introduces a new
CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU.
The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU
used to use when accessing memory in when fastmem was enabled.
This changeset also introduces a new switcheroo test that tests
switching between a NonCachingSimpleCPU and a TimingSimpleCPU with
caches.
Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12419
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Both se.py and fs.py need to check if a CPU is a KVM CPU. This is
somewhat involved since CPUs can be disabled at compile time. Enable
better code reuse by moving it to the CpuConfig module.
Change-Id: I47b1512ecb62e757399a407a0e41be83b9f83be3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12418
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Update simulation.py to always exit with code 0 assuming the simulation
exits normally. If the running application has a return code that is non
zero, then print the return code before exiting.
Change-Id: I1983985d50311627574d4364b32ee961ae88e003
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/4880
Replacement policies (LRU, Random) are currently considered as array
indexing methods, but have completely different functionalities:
- Array indexers determine the possible locations for block allocation.
This information is used to generate replacement candidates when
conflicts happen.
- Replacement policies determine which of the replacement candidates
should be evicted to make room for new allocations.
For this reason, they were split into different classes. Advantages:
- Easier and more straightforward to implement other replacement
policies (RRIP, LFU, ARC, ...)
- Allow easier future implementation of cache organization schemes
As now we can't assure the use of sets, the previous way to create a
true LRU is not viable. Now a timestamp_bits parameter controls how
many bits are dedicated for the timestamp, and a true LRU can be
achieved through an infinite number of bits (although a few bits suffice
in practice).
Change-Id: I23750db121f1474d17831137e6ff618beb2b3eda
Reviewed-on: https://gem5-review.googlesource.com/8501
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
