When a gem5 op is triggered using a KVM MMIO exit event, the PC has
already been advanced beyond the offending instruction. Normally when
a system call or gem5 op is triggered, the PC has not advanced because
the instruction hasn't actually finished executing. This means that if
a gem5 op, and by extension a system call in SE mode, want to advance
the PC to the instruction after the gem5 op, they have to check whether
they were triggered from KVM.
To avoid having to special case these sorts of situations (currently
only in the clone system call), we can have the code which dispatches to
gem5 ops from KVM adjust the next PC so that it points to what the
current PC is. That way the PC can be advanced unconditionally, and will
point to the instruction after the one that triggered the call.
To be fully consistent, we would also need to adjust the current PC.
That would be non-trivial since we'd have to figure out where the
current instruction started, and that may not even be possible to
unambiguously determine given x86's instruction structure. Then we would
also need to restore the original PC to avoid confusing KVM.
Change-Id: I9ef90b2df8e27334dedc25c59eb45757f7220eea
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38486
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change replaces the __attribute__ syntax with the now standard [[]]
syntax. It also reorganizes compiler.hh so that all special macros have
some explanatory text saying what they do, and each attribute which has a
standard version can use that if available and what version of c++ it's
standard in is put in a comment.
Also, the requirements as far as where you put [[]] style attributes are
a little more strict than the old school __attribute__ style. The use of
the attribute macros was updated to fit these new, more strict
requirements.
Change-Id: Iace44306a534111f1c38b9856dc9e88cd9b49d2a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35219
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The memory-mapped timer emulated by gem5 is driven by the underlying
gem5 tick, which means that we must align the tick with the host time
to make the timer interrupt fire at a nearly native rate.
In each KVM execution round, the number of ticks incremented is
directly calculated from the number of instructions executed. However,
when a guest CPU switches to idle state, KVM seems to stay in kernel-
space until the POSIX timer set up in user-space raises an expiration
signal, instead of trapping to user-space immediately; and somehow the
instruction count is just too low to match the elapsed host time. This
makes the gem5 tick increment very slowly when the guest is idle and
drastically slow down workloads being sensitive to the guest time which
is driven by timer interrupt.
Before switching to KVM to execute the guest code, gem5 programs the
POSIX timer to expire according to the remaining ticks before the next
event in the event queue. Based on this, we can come up with the
following solution: If KVM returns to user-space due to POSIX timer
expiration, it must be time to process the next gem5 event, so we just
fast-forward the tick (by scheduling the next CPU tick event) to that
event directly without calculating from the instruction count.
There is one more related issue needed to be solved. The KVM exit
reason, KVM_EXIT_INTR, was treated as the case where the KVM execution
was disturbed by POSIX timer expiration. However, there exists a case
where the exit reason is KVM_EXIT_INTR but the POSIX timer has not
expired. Its cause is still unknown, but it can be observed via the
"old_value" argument returned by timer_settime() when disarming the
POSIX timer. In addition, it seems to happen often when a guest CPU is
not in idle state. When this happens, the above tick event scheduling
incorrectly treats KVM_EXIT_INTR as POSIX timer expiration and fast-
forwards the tick to process the next event too early. This makes the
guest feel external events come too fast, and will sometimes cause
trouble. One example is the VSYNC interrupt from HDLCD. The guest seems
to get stuck in VSYNC handling if the KVM CPU is not given enough time
between each VSYNC interrupt to complete a service. (Honestly I did not
dig in to see how the guest handled the VSYNC interrupt and how the
above situation became trouble. I just observed from the debug trace of
GIC & HDLCD & timer, and made this conclusion.) This change also uses
a workaround to detect POSIX timer expiration correctly to make the
guest work with HDLCD.
JIRA: https://gem5.atlassian.net/browse/GEM5-663
Change-Id: I6159238a36fc18c0c881d177a742d8a7745a23ca
Signed-off-by: Hsuan Hsu <hsuan.hsu@mediatek.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30919
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The ThreadContext can be used to access the cpu if needed, and is a
more representative interface to various pieces of state than the CPU
itself. Also convert some of the methods in Interupts to use the
locally stored ThreadContext pointer instead of taking one as an
argument. This makes calling those methods simpler and less error
prone.
Change-Id: I740bd99f92e54e052a618a4ae2927ea1c4ece193
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28988
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The System class has a few different arrays of values which each
correspond to a thread of execution based on their position. This
change collects them together into a single class to make managing them
easier and less error prone. It also collects methods for manipulating
those threads as an API for that class.
This class acts as a collection point for thread based state which the
System class can look into to get at all its state. It also acts as an
interface for interacting with threads for other classes. This forces
external consumers to use the API instead of accessing the individual
arrays which improves consistency.
Change-Id: Idc4575c5a0b56fe75f5c497809ad91c22bfe26cc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25144
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The new local access mechanism installs a callback in the request which
implements what the mmapped IPR was doing. That avoids having to have
stubs in ISAs that don't have mmapped IPRs, avoids having to encode
what to do to communicate from the TLB and the mmapped IPR functions,
and gets rid of another global ISA interface function and header files.
Jira Issue: https://gem5.atlassian.net/browse/GEM5-187
Change-Id: I772c2ae2ca3830a4486919ce9804560c0f2d596a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23188
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
TheISA::initCPU is basically an ISA specific implementation of reset
logic on architectural state. As such, it only needs to be called if
we're not going to load a checkpoint, ie in initState.
Also, since the implementation was the same across all CPUs, this
change collapses all the individual implementations down into the base
CPU class.
Change-Id: Id68133fd7f31619c90bf7b3aad35ae20871acaa4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24189
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
This was useful when transitioning away from the CPU based
comInstEventQueue, but now that objects backing the ThreadContexts have
access to the underlying comInstEventQueue and can manipulate it
directly, they don't need to do so through a generic interface.
Getting rid of this function narrows and simplifies the interface.
Change-Id: I202d466d266551675ef6792d38c658d8a8f1cb8b
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22113
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This queue was set up to allow triggering events based on the total
number of instructions executed at the system level, and was added in
a change which added a number of things to support McPAT. No code
checked into gem5 actually schedules an event on that queue, and no
code in McPAT (which seems to have gone dormant) either downloadable
from github or found in ext modify gem5 in a way that makes it use
the instEventQueue.
Also, the KVM CPU does not interact with the instEventQueue correctly.
While it does check the per-thread instruction event queue when
deciding how long to run, it does not check the instEventQueue. It will
poke it to run events when it stops for other reasons, but it may (and
likely will) have run beyond the point where it was supposed to stop.
Since this queue doesn't seem to actually be used for anything, isn't
being used properly in all cases anyway, and adds overhead to all the
CPU models, this change eliminates it.
Change-Id: I0e126df14788c37a6d58ca9e1bb2686b70e60d88
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21783
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Tiago Mück <tiago.muck@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
glibc 2.30 introduced the function gettid() in sys/types.h to return the
caller's thread ID. In order to avoid conflicts, the already present
gettid() functions have been renamed to sysGettid(). This fixes a
compilation error with X86 arch.
Change-Id: I76c971465fc4b50e4decde8303185439082b2378
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21379
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
No caller uses any of the MasterPort specific properties of these
function's return values, so we can instead return a reference to the
base Port class. This makes it possible for the data and inst ports
to be of any port type, not just gem5 style MasterPorts. This makes
life simpler for, for example, systemc based CPUs which might have TLM
ports.
It also makes it possible for any two CPUs which have compatible ports
to be switched between, as long as the ports they use support being
unbound. Unfortunately that does not include TLM or systemc ports which
are bound permanently.
Change-Id: I98fce5a16d2ef1af051238e929dd96d57a4ac838
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20240
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>
PerfKvmCounter::attach fails if the user doesn't have privileges to make
the perf_event_open syscall. This is the default privilege setting since
kernel 4.6. I've seen some users in the mailing list resort to running
as root; changing the perf_event_paranoid setting is an alternative.
Change-Id: I2bc6f76abb6e97bf34b408a611f64b1910f50a43
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17508
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.
Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
These types are IntReg, FloatReg, FloatRegBits, and MiscReg. There are
some remaining types, specifically the vector registers and the CCReg.
I'm less familiar with these new types of registers, and so will look
at getting rid of them at some later time.
Change-Id: Ide8f76b15c531286f61427330053b44074b8ac9b
Reviewed-on: https://gem5-review.googlesource.com/c/13624
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
This patch is changing the underlying type for RequestPtr from Request*
to shared_ptr<Request>. Having memory requests being managed by smart
pointers will simplify the code; it will also prevent memory leakage and
dangling pointers.
Change-Id: I7749af38a11ac8eb4d53d8df1252951e0890fde3
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10996
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:
* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878
Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>
These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).
Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Move the code responsible for performing the actual probe point notify
into BaseCPU. Use BaseCPU activateContext and suspendContext to keep
track of sleep cycles. Create a probe point (ppActiveCycles) that does
not count cycles where the processor was asleep. Rename ppCycles
to ppAllCycles to reflect its nature.
Change-Id: I1907ddd07d0ff9f2ef22cc9f61f5f46c630c9d66
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5762
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
The VM's event queue is normally used for devices in multi-core KVM
mode. Add a helper method, BaseKvmCPU::deviceEventQueue(), to access
this queue. This makes the intention of code migrating to device event
queues clearer.
Change-Id: Ifb10f553a6d7445c8d562f658cf9d0b1f4c577ff
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4287
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
The KVM CPU sometimes needs to access devices when drain() is
called. This typically happens on ARM when synchronizing devices that
use the system register interface. When called from drain(), the event
queue isn't locked since drain is called from the outside when the
simulator isn't servicing any events. In such cases, performing a
migration to the device's queue will unlock a mutex that isn't
locked. This typically results in a deadlock when resuming the system
since the lock will be in an undefined state.
Change-Id: Ibdcc2e034e916a929124f297e72aae306cf66728
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4286
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
The BaseArmKvmCPU is responsible for forwarding the IRQ and FIQ
signals from gem5's simulated GIC to KVM. However, these signals
shouldn't be used when the in-kernel GIC emulator is used.
Instead of delivering the interrupts to the guest, we should just
ignore them since any such pending interrupts are likely to be an
artifact of CPU switching or incorrect draining.
Change-Id: I083b72639384272157f92f44a6606bdf0be7413c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sudhanshu Jha <sudhanshu.jha@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3660
Use the PyBind11 wrapping infrastructure instead of SWIG to generate
wrappers for functionality that needs to be exported to Python. This
has several benefits:
* PyBind11 can be redistributed with gem5, which means that we have
full control of the version used. This avoid a large number of
hard-to-debug SWIG issues we have seen in the past.
* PyBind11 doesn't rely on a custom C++ parser, instead it relies on
wrappers being explicitly declared in C++. The leads to slightly
more boiler-plate code in manually created wrappers, but doesn't
doesn't increase the overall code size. A big benefit is that this
avoids strange compilation errors when SWIG doesn't understand
modern language features.
* Unlike SWIG, there is no risk that the wrapper code incorporates
incorrect type casts (this has happened on numerous occasions in
the past) since these will result in compile-time errors.
As a part of this change, the mechanism to define exported methods has
been redesigned slightly. New methods can be exported either by
declaring them in the SimObject declaration and decorating them with
the cxxMethod decorator or by adding an instance of
PyBindMethod/PyBindProperty to the cxx_exports class variable. The
decorator has the added benefit of making it possible to add a
docstring and naming the method's parameters.
The new wrappers have the following known issues:
* Global events can't be memory managed correctly. This was the
case in SWIG as well.
Change-Id: I88c5a95b6cf6c32fa9e1ad31dfc08b2e8199a763
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Hansson <andreas.hansson@arm.com>
Reviewed-by: Andrew Bardsley <andrew.bardsley@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2231
Reviewed-by: Tony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Pierre-Yves Péneau <pierre-yves.peneau@lirmm.fr>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
A KVM VM is typically a child of the System object already, but for
solving future issues with configuration graph resolution, the most
logical way to keep track of this object is for it to be an actual
parameter of the System object.
Change-Id: I965ded22203ff8667db9ca02de0042ff1c772220
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
The headers declared in export_method_cxx_predecls are redundant since a
SimObject's main header is automatically included.
Change-Id: Ied9e84630b36960e54efe91d16f8c66fba7e0da0
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Joe Gross <joseph.gross@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
This patch enables timing accesses for KVM cpu. A new state,
RunningMMIOPending, is added to indicate that there are outstanding timing
requests generated by KVM in the system. KVM's tick() is disabled and the
simulation does not enter into KVM until all outstanding timing requests have
completed. The main motivation for this is to allow KVM CPU to perform MMIO
in Ruby, since Ruby does not support atomic accesses.
Only map memories into the KVM guest address space that are
marked as usable by KVM. Create BackingStoreEntry class
containing flags for is_conf_reported, in_addr_map, and
kvm_map.
In general, the ThreadID parameter is unnecessary in the memory system
as the ContextID is what is used for the purposes of locks/wakeups.
Since we allocate sequential ContextIDs for each thread on MT-enabled
CPUs, ThreadID is unnecessary as the CPUs can identify the requesting
thread through sideband info (SenderState / LSQ entries) or ContextID
offset from the base ContextID for a cpu.
This is a re-spin of 20264eb after the revert (bd1c6789) and includes
some fixes of that commit.
