Changes:
1. RiscvBareMetal
The RiscvBareMetal class and API are preserved for backwards
compatibility, but the base class RiscvFSWorkload is removed
as it inherits from the Workload class. However, most needed
functionalities are already implemented in the KernelWorkload
class
2. RiscvLinux
The RiscvLinux class is added. A dtb filename can be specified
to be loaded to the corresponding memory address.
3. HiFive, Clint, Plic, Uart8250, VirtIOMMIO
Devicetree node generation function is added.
4. tlb, faults
Unnecessary includes of arch/riscv/fs_workload are removed.
Change-Id: Ia239b5614bd93d8e794330ead266f6121a4d13cb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42053
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, and 2 levels of indentation (and 2 of 2 spaces,
1 of 3 spaces and 2 of 12 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *enum [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>enum X ... {
by:
<indent level>enum X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc \
"^enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^enum ([A-Za-z].*) \{$/enum \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ enum [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ enum ([A-Za-z].*) \{$/ enum \1\n \{/g'
and so on.
Change-Id: Ib186cf379049098ceaec20dfe4d1edcedd5f940d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43326
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch implements the RISC-V HiFive Platform
(based on the SiFive HiFive series). The HiFive
platform requires a PLIC and CLINT device (based on
current HiFive boards).
The optional uart_int_id field redirects Console interrupts
to the PLIC interrupt controller.
PlicDevice is a wrapper around BasicPioDevice that
requires an interrupt ID. Interrupts are expected to
be raised via platform->postPciInterrupt(id).
VirtIOMMIO is a slight modification from the ARM
implementation such that interrupts are posted through
PLIC
PlicDevice is a wrapper around BasicPioDevice that
requires an interrupt ID. Interrupts are expected to
be raised via platform->postPciInterrupt(id).
VirtIOMMIO is a slight modification from the ARM
implementation such that interrupts are posted through
PLIC.
Uart8250 was modified slightly for easier Python
setup.
Change-Id: I4bbdb5f903b52a41d1b7e0ccc44877c46cd30d56
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40599
Reviewed-by: Ayaz Akram <yazakram@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
The patch is using the newly defined PARAMS macro to replace
custom params() getters in derived class.
The patch is also removing redundant _params:
Instead of creating yet another _params field, SimObject descendants
should use params() to expose the real type of SimObject::_params they
already have.
Change-Id: I43394cebb9661fe747bdbb332236f0f0181b3dba
Signed-off-by: Alexander Klimov <Alexander.Klimov@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39900
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Two python Enum parameter types had some very generic elements which
both include one named "none". When headers for both are included that
creates a conflict which breaks the build. Enums which such extremely
generic names need to be scoped so that they don't invite these sorts
of collisions.
This change converts them from Enum to ScopedEnum in python, and also
makes a few small changes to where they're used in c++ to match.
Issue-on: https://gem5.atlassian.net/browse/GEM5-447
Change-Id: Ibda6e6cfcd700a618f8c68d174f33ec1e178b9ac
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27950
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.
Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Generally speaking, the endianness of the data devices provide or
accept is dependent on the device and not the ISA the system
executes. This change makes the devices in dev pick an endianness
rather than using the guest's.
For the ISA bus and the UART, accesses are byte sized and so endianness
doesn't matter. The ISA and PCI busses and the devices which use them
are defined to be little endian.
Change-Id: Ib0aa70f192e1d6f3b886d9f3ad41ae03bddb583f
Reviewed-on: https://gem5-review.googlesource.com/c/13462
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
When running gem5, the simulator outputs the following message to
describe the ports used by the VNC server and ther terminal:
Listening for system connection on port 5900
Listening for system connection on port 3456
The code used to extract the basename ('terminal' or 'vncserver') and
print that instead of system. However, this doesn't seem to work any
more. Change the code to output the full object name instead.
Change-Id: Ib27f66a5f8ba64c7a875b4e2f26a2e2ff48db8f3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anouk Van Laer <anouk.vanlaer@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10026
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Add a simple memory-mapped device that forwards writes to a serial
devices and treats reads as reads from the device. Unlike real UART
models, this one doesn't support interrupts.
This is useful to implement various debug devices that exist in many
systems.
Change-Id: I1e4300e4d3b70825a15d03f47d4e026941f9066c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jack Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/10025
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).
Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
