The physical address has already been set (it's read earlier in the
function), and so doesn't need to be set again. Reading the virtual
address can cause an assert if the virtual address had never been set in
the first place, for example when an access comes from KVM which might
give you an access to complete which is based on a physical address
only.
Change-Id: Ic46a40b1a94235538b5bd53065e5019273b3d3f3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29172
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Pouya Fotouhi <pfotouhi@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This was previously used to test gem5 being compiled and run in a
Python3 environment. This is redundant with the introduction of
"util/dockerfiles/ubuntu-20.04_all-dependencies", which uses python3
exclusively.
Change-Id: Ie837da338c3985ba92aff84144948a23fd6ece3f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28890
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This Dockerfile creates an image which simulates an Ubuntu 20.04
environment. Unlike the Ubuntu 18.04 Dockerfile, this does not use
Python2. It uses exclusively Python3. Ubuntu 20.04 has Python3 installed
by default. The image this Dockerfile creates can be obtained from
"gcr.io/gem5-test/ubuntu-20.04_all-dependencies". To pull:
docker pull gcr.io/gem5-test/ubuntu-20.04_all-dependencies
Change-Id: I73b51028e0d6a3198aa6e7b1906d20ed6eb6c815
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28889
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The recent commit dd6cd33 modified the behaviour of the the Ruby
sequencer to handle load linked requests as loads rather than
stores. This caused the regression test
realview-simple-timing-dual-ruby-ARM-x86_64-opt
to become stuck when booting Linux. This patch fixes the issue by
adding a missing forward_eviction_to_cpu action to the state
transition(OM, Fwd_GETX, IM).
Change-Id: I8f253c5709488b07ddc5143a15eda406e31f3cc6
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28787
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
If m5writeFile opens stdout/stderr, no file is registered in
OutputDirectory and thus we don't want to search for it on close.
In order to write multiple times to stdout/stderr in a reasonable way,
we also want to prevent seeking. Thus, don't seek if the offset is 0, in
which case this would be a noop anyway (we just opened the file without
append).
Finally, it is helpful for debugging if the stream is flushed on every
write.
Change-Id: I102f82dcd2c63420b6f3fe55d67f03c62349e69d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28727
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Most of these "rcS" scripts are only useful for specific disk images
that have long been lost to the gem5 community. This commit deletes all
of these scripts. It keeps the generally useful hack_back_cktp script
and the bbench scripts that work with the android images that are still
available.
In the future, these remaning scripts should be moved to the gem5
resources repository.
Issue-on: https://gem5.atlassian.net/browse/GEM5-350
Change-Id: Iba99e70fde7f656e968b4ecd95663275bd38fd6e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28507
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch fixes the MESI_Three_Level protocols so that it correctly
informers the Ruby sequencer when a line eviction occurs. Furthermore,
the patch allows the protocol to recognize the 'Store_Conditional'
RubyRequestType and shortcuts this operation if the monitored line
has been cleared from the address monitor. This prevents certain
livelock behaviour in which a line could ping-pong between competing
cores.
The patch establishes a new C/C++ preprocessor definition which allows
the Sequencer to send the 'Store_Conditional' RubyRequestType to
MESI_Three_Level instead of 'ST'. This is a temporary measure until
the other protocols explicitely recognize 'Store_Conditional'.
Change-Id: I27ae041ab0e015a4f54f20df666f9c4873c7583d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28328
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The implementation for load-linked/store-conditional did not work
correctly for multi-core simulations. Since load-links were treated as
stores, it was not possible for a line to have multiple readers which
often resulted in livelock when using these instructions to implemented
mutexes. This improved implementation treats load-linked instructions
similarly to loads but locks the line after a copy has been fetched
locally. Writes to a monitored address ensure the 'linked' property is
blown away and any subsequent store-conditional will fail.
Change-Id: I19bd74459e26732c92c8b594901936e6439fb073
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27103
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Using mechanisms added in previous CLs, this change modifies the m5
utility so that it can use any of the back ends enabled and implemented
by each variant, defaulting to one particular implementation if not is
selected explicitly.
On x86, the default mechanism is the magic address. All other variants
default to the magic instruction since they don't have a well
established address to use or even in most cases an implementation to
use.
The ability to override the particular magic address the utility wants
to use (necessary on variants such as aarch64) will be added in a future
CL.
Change-Id: I5fc414740e30759e7dde719cddcc8d5d41f8cc74
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27242
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Pouya Fotouhi <pfotouhi@ucdavis.edu>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
If the address space is changed (by writing to SATP), it can happen that
a page table walk is in progress. Previously, this failed if the ASID
changed, because we then used the wrong ASID for the lookup.
This commit makes sure that we don't access CSRs after the beginning of
the walk by loading SATP, STATUS, and PRV at the beginning.
Change-Id: I8c184c7ae7dd44d78e881bb5ec8d430dd480849c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28447
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The MESI_Three_Level protocol includes a transition in its L1
definition to invalidate an SM state but this transition does
not notify the L0 cache. The unintended side effect of this
allows stale values to be read by the L0 cache. This can cause
incorrect behaviour when executing LL/SC based mutexes. This
patch ensures that all invalidates to SM states are exposed to
the L0 cache.
Change-Id: I7fefabdaa8027fdfa4c9c362abd7e467493196aa
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28047
Reviewed-by: John Alsop <johnathan.alsop@amd.com>
Reviewed-by: Pouya Fotouhi <pfotouhi@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch fixes the following bugs:
- Previously when deltaPointer was 0 or 1, getting the last or penultimate deltas
would be wrong for non-pow2 deltas.size(). For example, if the last added delta
was to position 0, the previous should be in position 19, if deltas.size() = 20.
However, 0-1=4294967295, and 4294967295%20=15.
- When searching for the previous late and penultimate, the oldest entry was being
skipped.
Change-Id: Id800b60b77531ac4c2920bb90c15cc8cebb137a9
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24538
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Javier Bueno Hedo <javier.bueno@metempsy.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
When the internal utility function make_version_list sees a string, it
tries to convert it into a list using the map() function. In python 3,
that returns an iterator. The following call to zip() will consume those
iterators, and then the following calls to len() will die because they
don't work on map iterators.
This is only a problem if all the common components of the version lists
are equal, and the comparison needs to then check if one of the lists
was equal to the other but with more components. When versions are
equal, for instance when compiling with the oldest supported version of
gcc (4.8.0) this error surfaces and breaks our scons build.
A simple fix is to just wrap the call to map() with list() to convert
the iterator to a flat list, making the other logic work as before.
Change-Id: If9dc5cd7fff70c21229ac3dd9a017edeccd26148
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28309
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The priority queue comparator orders such that false gives the
entry a higher priority. Therefore, if it is desired to make
the entry with lowest decompression latency have higher priority,
the comparison must be inverted.
Can be tested with:
MultiCompressor(compressors=[
PerfectCompressor(decompression_latency=1),
PerfectCompressor(decompression_latency=2)])
Where it is expected that compressor0 (the one with decomp lat
of 1) is always chosen.
Change-Id: I44acbf5f51c6e47efdd2a16fba9596935cf2eb69
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28367
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adds a TokenPort which uses tokens for flow control rather than the
standard retry mechanism in gem5. The port is intended to be used
for flow control where speculatively sending packets is not possible.
For example, GPU instructions require this to send memory requests
to the cache coalescer.
Change-Id: Id0d55ab65b7c773e97752b8514a780cdf7d88707
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27428
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
