Disks now track the channel they're attached to so that that doesn't
have to be rediscovered by comparing points, channels know if they're
primary or secondary, and interrupts will now set the interrupt bit of
the channel they're associated with instead of always the primary.
Also the interrupt mechanism was adjusted slightly so that it's
implemented by a virtual function which knows whether the interrupt came
from the primary or secondary channel. That will make it possible to
implement separate interrupts, as required by the compatibility mode
which can be used with x86.
Change-Id: Ic5527c238ef7409153e80e4ab843a50be6e452c5
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/55584
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
::Stats became ::statistics.
"statistics" was chosen over "stats" to avoid generating
conflicts with the already existing variables (there are
way too many "stats" in the codebase), which would make
this patch even more disturbing for the users.
Change-Id: If877b12d7dac356f86e3b3d941bf7558a4fd8719
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45421
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This size was used to break up DMA transactions so that a single
transaction would not cross a page boundary. This was because on Alpha,
there was an actual page table which translated between PCI and DMA
address spaces. On all currently implemented systems, the mapping is
simply to add a scalar offset, so it's not possible for a legal region
of memory to be contiguous in one space but not in the other.
Additionally, if it *was* possible for there to be a mismatch, it was
only coincidence that Alpha used a page table which had the same sized
pages as it normally used. There is no requirement that there even would
be fixed sized pages in the first place.
To avoid this artificial dependency between the IDE controller and the
ISA, this change simply changes the chunk size for DMA accesses to 4K.
That's the page size at least on x86 and probably other architectures,
and will be a pretty close approximation of the previous behavior.
It's possible that even having this chunking in the first place is
unnecessary and functionally useless, but there are some checks which
happen between chunks, and changing how big they are would change the
frequency of those checks. For instance, the controller/disk may not
notice in the same amount of time if a DMA was cancelled somehow.
Change-Id: I1ec840d1f158c3faa31ba0184458b69bf654c252
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/34178
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
isa_traits.hh used to have much more in it, but now it only has
PageShift, PageBytes, and (for now) the guest endianness. These values
should only be retrieved from the System class generally speaking, so
only the system class should include arch/isa_traits.hh.
Some gpu compute related files need PageBytes or PageShift. Even though
those files don't advertise their ISA dependence, they are tied to x86.
In those files, they can include arch/x86/isa_traits.hh.
The only other file which legitimately needs arch/isa_traits.hh is the
decoder cache since it uses PageBytes to size an array.
Change-Id: I12686368715623e3140a68a7027c136bd52567b1
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/33203
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
GCC 7.2 is much stricter than previous GCC versions. The following changes
are needed:
* There is now a warning if there is an implicit fallthrough between two
case statments. C++17 adds the [[fallthrough]]; declaration. However,
to support non C++17 standards (i.e., C++11), we use M5_FALLTHROUGH.
M5_FALLTHROUGH checks for [[fallthrough]] compliant C++17 compiler and
if that doesn't exist, it defaults to nothing (no older compilers
generate warnings).
* The above resulted in a couple of bugs that were found. This is noted
in the review request on gerrit.
* throw() for dynamic exception specification is deprecated
* There were a couple of new uninitialized variable warnings
* Can no longer perform bitwise operations on a bool.
* Must now include <functional> for std::function
* Compiler bug for void* lambda. Changed to auto as work around. See
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82878
Change-Id: I5d4c782a4e133fa4cdb119e35d9aff68c6e2958e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/5802
Reviewed-by: Gabe Black <gabeblack@google.com>
Add a case for the ATA command ATAPI_IDENTIFY_DEVICE.
This avoids the panic: Unsupported ATA command when booting a recent Linux
kernel. This was tested on 4.8.13.
Change-Id: Ib297a2c02da0730d8698c59801254dd0f5ee9f7f
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/2863
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
We want to extend the stats of objects hierarchically and thus it is necessary
to register the statistics of the base-class(es), as well. For now, these are
empty, but generic stats will be added there.
Patch originally provided by Akash Bagdia at ARM Ltd.
