This hook will let them implement whatever additional behavior is
necessary for when the clock changes.
An alternative design for this might have made the "update" function
virtual, and required anyone overriding it to call into the base class.
I think that would be an inferior design for two reasons. First, the
subclass author might forget to call update. Second, while it might
*seem* like this would have some performance benefit since you wouldn't
call into the virtual function and then call update, incurring the
function call overhead twice, you're going to call into update once
regardless, and then you're either going to call the virtual funciton
which does nothing (the norm) or does something. In either case you
call the same functions the same number of times.
There may be a slight penalty in code size since the call to update
may be inlined in the call sights before the virtual function, and
there will almost certainly be more of those than there would be
implementations of the virtual function, but that should be negligable
when compared to gem5's size as a whole.
Change-Id: Id25a5359f2b1f7e42c6d1dcbc70a37d3ce092d38
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20089
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Chun-Chen TK Hsu <chunchenhsu@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Srikant Bharadwaj <srikant.bharadwaj@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The fstat64 system call does an upcast on entries in the file
descriptor array to check if the file descriptor has a backing
host-filesystem file opened. It does so because it needs to pass
the host fd into the fstat call (since we rely on the host
filesystem to service filesystem system calls).
The upcast was overly specific. This changeset alters the system
call to use the most general base class of the file descriptor
entries that can satisfy the code.
Change-Id: I10daf820257cea4d678ee6917e01e9cc9cd1cf5e
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17110
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
This expands those functions into code which extracts the virt proxy
and then uses the appropriate method on it. This has two benefits.
First, the Copy* functions where mostly redundant wrappers around the
methods the proxy port already had. Second, using them forced a
particular port which might not actually be what the user wanted.
Change-Id: I62084631dd080061e3c74997125164f40da2d77c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18575
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Set the default release to that single value for all ISAs.
glibc has checks for the kernel version based on uname, and refuses
to start any syscall emulation programs if those checks don't pass with
error:
FATAL: kernel too old
The ideal solution to this problem is to actually implement all missing
system calls for the required kernel version and bumping the release
accordingly.
However, it is very hard to implement all missing syscalls and verify
compliance.
Previously, we have simply bumped the version manually from time to
time when major glibc versions started breaking.
This commit alleviates the problem in two ways.
Firstly, having a single kernel version for all versions means that it is
easier to bump all versions at once.
Secondly, it makes it is possible to set the release with a parameter,
which in turn can be set from the command line with:
se.py --param 'system.cpu[:].workload[:].release = "4.18.0"'
Change-Id: I9e3c31073bfe68735f7b0775c8e299aa62b98222
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17849
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The system calls had four parameters. One of the parameters
is ThreadContext and another is Process. The ThreadContext
holds the value of the current process so the Process parameter
is redundant since the system call functions already have
indirect access.
With the old API, it is possible to call into the functions with
the wrong supplied Process which could end up being a confusing
error.
This patch removes the redundancy by forcing access through the
ThreadContext field within each system call.
Change-Id: Ib43d3f65824f6d425260dfd9f67de1892b6e8b7c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12299
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Currently, the open system call implementation in SE mode
treats /sys/ as a special path that is opened using a
special open handler. The ROC runtime, however, reads
several files in /sys/ that are supported via path
redirection. Here we remove /sys/ from the special files
so that the necessary files may be read via path
redirection.
Change-Id: Ifdab38ea1e6cc486ad43aec96b6e032fe63f137d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12127
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This gets rid of the big mass of #if-s around headers and around the
code which creates an object file.
As a nice side bonus, this also means that in addition to supporting
multiple OS/arch combinations simultaneously, the object file loader
could support multiple ISAs simultaneously as well, since each could
load and set up its object file loaders indepedently and without the
base process classes knowledge/involvement.
Change-Id: I0a19ad06e30e9062a96d27f00b66756eb3a595ba
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18631
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
54c77aa055 introduced a bug which manifests as cyclical
dependency on a member initialization for the Process
class.
The current working directory (cwd) parameter is passed into
Process to initialize both the target and host versions of the
cwd. (The target and host versions may differ if the faux
filesystem is used.) The host cwd init invoked methods which
rely on the host cwd already being initialized. To avoid the
bug, the code will now rely on using the targets cwd version,
but will issue checks against the redirect paths.
Change-Id: I4ab644a3e00737dbf249f5d6faf20a26ceb04248
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18448
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Then cast to the ISA specific type when necessary. This removes
(mostly) an ISA specific aspect to some of the interfaces. The ISA
specific version of the kernel stats still needs to be constructed and
stored in a few places which means that kernel_stats.hh still needs to
be a switching arch header, for instance.
In the future, I'd like to make the kernel its own object like the
Process objects in SE mode, and then it would be able to instantiate
and maintain its own stats.
Change-Id: I8309d49019124f6bea1482aaea5b5b34e8c97433
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18429
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The AuxVector type has a bunch of accessors which just give access to
the underlying variables through references. We might as well just make
those members accessible directly.
Also, the AuxVector doesn't need to handle endianness flips itself. We
can tell the byteswap mechanism how to flip an AuxVector, and let it
handle that for us.
This gets rid of the entire .cc file which was complicated by trying
to both hide the ISA specific endianness translations, and instantiate
templated functions in a .cc.
Change-Id: I433cd61e73e0b067b6d628fba31be4a4ec1c4cf0
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18373
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
These selected their behavior based on ifdefs and had to be disabled
when on the NULL ISA. The versions which take an explicit endianness
have been renamed to just read/write instead of readGtoH and writeHtoG
since the direction of the translation is obvious from context.
Change-Id: I6cfbfda6c4481962d442d3370534e50532d41814
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18372
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
MemObject doesn't provide anything beyond its base ClockedObject any
more, so this change removes it from most inheritance hierarchies.
Occasionally MemObject is replaced with SimObject when I was fairly
confident that the extra functionality of ClockedObject wasn't needed.
Change-Id: Ic014ab61e56402e62548e8c831eb16e26523fdce
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18289
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
This change introduces the concept of a faux-filesystem.
The faux-filesystem creates a directory structure in m5out
(or whatever output dir the user specifies) where system calls
may be redirected.
This is useful to avoid non-determinism when reading files
with varying path names (e.g., variations from run-to-run if
the simulation is scheduled on a cluster where paths may change).
Also, this changeset allows circumventing host pseudofiles which
have information specific to the host processor (such as cache
hierarchy or processor information). Bypassing host pseudofiles
can be useful when executing runtimes in the absence of an
operating system kernel since runtimes may try to query standard
files (i.e. /proc or /sys) which are not relevant to an
application executing in syscall emulation mode.
Change-Id: I90821b3b403168b904a662fa98b85def1628621c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12119
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This changeset enables clone to work with X86KvmCPU model, which
will allow running multi-threaded applications at near hardware
speeds. Even though the application is multi-threaded, the KvmCPU
model uses one event queue, therefore, only one hardware thread
will be used, through KVM, to simulate multiple application threads.
Change-Id: I2b2a7b1edb1c56eeb9c4fa0553cd236029cd53f8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18268
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These are now pure virtual methods which more specialized port
subclasses will need to implement. The SlavePort class implements them
by ignoring them and then providing parallel functions for the
MasterPort to call. The MasterPort's methods do basically what they
did before, except now bind() uses dynamic cast to check if its peer
is of the appropriate type and also to convert it into that type before
connecting to it.
Change-Id: I0948799bc954acaebf371e6b6612cee1d3023bc4
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/17038
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
There are some cases, specifically when running systemc, that it's
necessary to exit the simulation loop immediately rather than finishing
running events scheduled for the current Tick. When running under
sc_main, sc_stop and sc_pause return control to sc_main which can
happen immediately. When running without sc_main, control needs to
return to the python config script which needs to happen through a
global exit event.
Since sc_pause and sc_stop are supposed to stop simulation without
necessarily letting all the events at the current time run, we need
a way to schedule an exit event with a very high priority (rather than
a very low priority).
This change adds a new exitSimLoopNow function which does that, and
adds a new constructor to the GlobalSimLoopExitEvent which uses that
priority.
Also, a couple of cruft functions from the sim events are removed.
Change-Id: Icfbec17fb10f98084a75740acd839dbf4096fbb3
Reviewed-on: https://gem5-review.googlesource.com/c/16444
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
The importer in Python 3 doesn't like the way we import SimObjects
from the global namespace. Convert the existing SimObject declarations
to import from m5.objects. As a side-effect, this makes these files
consistent with configuration files.
Change-Id: I11153502b430822130722839e1fa767b82a027aa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15981
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
The approach we currently use to register our native modules doesn't
work on Python 3. Convert the code to use the Python inittab instead
of the old ad-hoc method.
Change-Id: I961f8a33993c621473732faeaab955a882769a4b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/15979
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
This patch implements FUTEX_WAKE_OP operation in the futex syscall.
Below is its description:
int futex(int *uaddr, int futex_op, int val,
const struct timespec *timeout,
int *uaddr2, int val3);
This operation was added to support some user-space use cases where more
than one futex must be handled at the same time. The most notable
example is the implementation of pthread_cond_signal(3), which requires
operations on two futexes, the one used to implement the mutex and the
one used in the implementation of the wait queue associated with the
condition variable. FUTEX_WAKE_OP allows such cases to be implemented
without leading to high rates of contention and context switching.
Reference: http://man7.org/linux/man-pages/man2/futex.2.html
Change-Id: I215f3c2a7bdc6374e5dfe06ee721c76933a10f2d
Reviewed-on: https://gem5-review.googlesource.com/c/9630
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This patch supports FUTEX_CMP_REQUEUE operation. Below is its
description from Linux man page:
futex syscall: int futex(int *uaddr, int futex_op, int val,
const struct timespec *timeout,
int *uaddr2, int val3);
This operation first checks whether the location uaddr still contains
the value val3. If not, the operation fails with the error EAGAIN.
Otherwise, the operation wakes up a maximum of val waiters that are
waiting on the futex at uaddr. If there are more than val waiters, then
the remaining waiters are removed from the wait queue of the source
futex at uaddr and added to the wait queue of the target futex at
uaddr2. The val2 argument specifies an upper limit on the number of
waiters that are requeued to the futex at uaddr2.
Reference: http://man7.org/linux/man-pages/man2/futex.2.html
Change-Id: I6d2ebd19a935b656d19d8342f7ab450c0d2031f4
Reviewed-on: https://gem5-review.googlesource.com/c/9629
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
When a thread calls exit_group, in addition to halting the thread
itself, it needs to halt all other threads in its group (i.e., threads
sharing the same thread group ID). This patch enables threads to do
that.
Change-Id: Ib2e158fb27cf98843f177a64a2d643b1bbc94d03
Reviewed-on: https://gem5-review.googlesource.com/c/9623
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
This patch adds support for two operations in futex system call:
FUTEX_WAIT_BITSET and FUTEX_WAKE_BITSET. The two operations are used to
selectively wake up a certain thread waiting on a futex variable.
Basically each thread waiting on a futex variable is associated with a
bitset that is checked when another thread tries to wake up all threads
waiting on the futex variable.
Change-Id: I2300e53b144d8fae226423fa2efb0238c1d93ef9
Reviewed-on: https://gem5-review.googlesource.com/c/9621
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>
When a thread executed an exit syscall in SE mode, the thread context
was removed immediately in the same cycle, which left inflight squash
operations and trap event incomplete. The problem happened when a new
thread was assigned to the CPU later. The new thread started with some
incomplete transactions of the previous thread (e.g., squashing). This
problem could cause incorrect execution flow for the new thread (i.e.,
pc was not reset properly at the exit point), deadlock (i.e., some
stage-to-stage signals were not reset) and incorrect rename map between
logical and physical registers.
This patch adds a new state called 'Halting' to the thread context and
defers removing thread context from a CPU until a trap event initiated
by an exit syscall execution is processed. This patch also makes sure
that the removal of a thread context happens after all inflight
transactions of the to-be-removed thread in the pipeline complete.
Change-Id: If7ef1462fb8864e22b45371ee7ae67e2a5ad38b8
Reviewed-on: https://gem5-review.googlesource.com/c/8184
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
