The config option HAVE_CAPSTONE is added in the previous [1] and
the Kconfig options should be sync with it.
[1] https://github.com/gem5/gem5/pull/494
Change-Id: Id83718bc825f53d87d37d6ac930b96371209bdb3
The CL updates the Kconfig:
1. Replace the USE_NULL_ISA with BUILD_ISA
2. The USE_XXX_ISAs are depends on BUILD_ISA
3. If the BUILD_ISA is set, at least one of USE_XXX_ISAs must be set
4. Refactor the USE_KVM option
Change-Id: I2a600dea9fb671263b0191c46c5790ebbe91a7b8
These are not yet consumed by anything, but convert all the settings
from SCons variables to Kconfig variables.
If you have existing SConsopts files which need to be converted, you
should take a look at KCONFIG.md to learn about how kconfig is used in
gem5. You should decide if any variables need to be available to C++ or
kconfig itself, and whether those are options which should be detected
automatically, or should be up to the user. Options which should be
measured automatically should still be in SConsopts files, while user
facing options should be added to new or existing Kconfig files.
Generally, make sure you're storing c++/kconfig visible options in
env['CONF'][...]. Also remove references to sticky_vars since persistent
options should now be handled with kconfig, and export_vars since
everything in env['CONF'] is now exported automatically.
Switch SCons/gem5 to use Kconfig for configuration, except EXTRAS which
is still a sticky SCons variable. This is necessary because EXTRAS also
controls what config options exist. If it came from Kconfig itself, then
there would be a circular dependency. This dependency could
theoretically be handled by reparsing the Kconfig when EXTRAS
directories were added or removed, but that would be complicated, and
isn't supported by kconfiglib. It wouldn't be worth the significant
effort it would take to add it, just to use Kconfig more purely.
Change-Id: I29ab1940b2d7b0e6635a490452d05befe5b4a2c9
The AtomicWait event was not being woken up properly due to the
numPending count in the TBE not being decremented. This patch decrements
the count when Data is returned. Since that moves to a base state, the
TBE should no longer be needed.
Additionally added a transition which stalls and wait when an AtomicWait
occurs while in WI state so that it retries.
Change-Id: Ic8bfc700f9df3f95bea0799121898926a23d8163
When restoring checkpoints for certain applications, gem5 tries to
create new doorbells with a pre-existing queue ID and simulation crashes
shortly after. This commit adds existing IDs to the GPU device's used
VMID map so that new doorbells are aware of existing queue IDs and use a
new ID. This ensures that queue IDs are unique after checkpoint
restoration
When restoring checkpoints for certain applications, gem5 tries to
create new doorbells with a pre-existing queue ID and simulation crashes
shortly after. This commit checkpoints the existing VMID map so that any
new doorbells after restoration use a unique queue ID
Change-Id: I9bf89a2769db26ceab4441634ff2da936eea6d6f
https://github.com/gem5/gem5/pull/386 included two cases in
"src/dev/reg_bank.hh" where `std:: min` was used to compare a an integer
of type `size_t` and another of type `Addr`. This cause an error on my
Apple Silicon Mac as this is a comparison between an "unsigned long"
and an "unsigned long long" which (at least on my setup) was not
permitted. To fix this issue the `reg_size` was changed from `size_t` to
`Addr`, as well as it the types of the values it was derived from and
the variable used to hold the return from the `std::min` calls.
Change-Id: I31e9c04a8e0327d4f6f5390bc5a743c629db4746
When restoring checkpoints for certain applications, gem5 tries to
create new doorbells with a pre-existing queue ID and simulation crashes
shortly after. This commit adds existing IDs to the GPU device's used
VMID map so that new doorbells are aware of existing queue IDs and use a
new ID. This ensures that queue IDs are unique after checkpoint
restoration
Change-Id: I9bf89a2769db26ceab4441634ff2da936eea6d6f
This pull request contains a set of small patches which fix some bugs in
the gem5 prefetchers, and aligns out-of-the box prefetcher performance
more closely with that which a typical user would expect.
The performance patches have been tested with an out-of-the-box
(untuned) Stride prefetcher configuration against a set of SPEC 2017
SimPoints, and show a modest IPC uplift across the board, with no IPC
degradation.
The new defaults were identified as part of work on gem5 prefetchers
undertaken by Nikolaos Kyparissas while on internship at Arm.
The comp_anr parameter is currently unused. Both parameters (comp_wu and
comp_anr) are set to false by default
Change-Id: If09567504540dbee082191d46fcd53f1363d819f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Currently, the GPU SQC (L1I$) and TCP (L1D$) have a performance bug
where they do not behave correctly when multiple requests to the same
cache line overlap one another. The intended behavior is that if the
first request that arrives at the Ruby code for the SQC/TCP misses, it
should send a request to the GPU TCC (L2$). If any requests to the
same cache line occur while this first request is pending, they should
wait locally at the L1 in the MSHRs (TBEs) until the first request has
returned. At that point they can be serviced, and assuming the line
has not been evicted, they should hit.
For example, in the following test (on 1 GPU thread, in 1 WG):
load Arr[0]
load Arr[1]
load Arr[2]
The expected behavior (confirmed via profiling on real GPUs) is that
we should get 1 miss (Arr[0]) and 2 hits (Arr[1], Arr[2]) for such a
program.
However, the current support in the VIPER SQC/TCP code does not model
this correctly. Instead it lets all 3 concurrent requests go straight
through to the TCC instead of stopping the Arr[1] and Arr[2] requests
locally while Arr[0] is serviced. This causes all 3 requests to be
classified as misses.
To resolve this, this patch adds support into the SQC/TCP code to
prevent subsequent, concurrent requests to a pending cache line from
being
sent in parallel with the original one. To do this, we add an
additional transient state (IV) to indicate that a load is pending to
this cache line. If a subsequent request of any kind to the same cache
line occurs while this load is pending, the requests are put on the
local wait buffer and woken up when the first request returns to the
SQC/TCP. Likewise, when the first load is returned to the SQC/TCP, it
transitions from IV --> V.
As part of this support, additional transitions were also added to
account for corner cases such as what happens when the line is evicted
by another request that maps to the same set index while the first load
is pending (the line is immediately given to the new request, and when
the load returns it completes, wakes up any pending requests to the same
line, but does not attempt to change the state of the line) and how GPU
bypassing loads and stores should interact with the pending requests
(they are forced to wait if they reach the L1 after the pending,
non-bypassing load; but if they reach the L1 before the non-bypassing
load then they make sure not to change the state of the line from IV if
they return before the non-bypassing load).
As part of this change, we also move the MSHR behavior from internally
in the GPUCoalescer for loads to the Ruby code (like all other
requests). This is important to get correct hits and misses in stats
and other prints, since the GPUCoalescer MSHR behavior assumes all
requests serviced out of its MSHR also miss if the original request to
that line missed.
Although the SQC does not support stores, the TCP does. Thus,
we could have applied a similar change to the GPU stores at the TCP.
However, since the TCP support assumes write-through caches and does not
attempt to allocate space in the TCP, we elected not to add this support
since it seems to run contrary to the intended behavior (i.e., the
intended behavior seems to be that writes just bypass the TCP and thus
should not need to wait for another write to the same cache line to
complete).
Additionally, making these changes introduced issues with deadlocks at
the TCC. Specifically, some Pannotia applications have accesses to the
same cache line where some of the accesses are GLC (i.e., they bypass
the GPU L1 cache) and others are non-GLC (i.e., they want to be cached
in the GPU L1 cache). We have support already per CU in the above code.
However, the problem here is that these requests are coming from
different CUs and happening concurrently (seemingly because different
WGs are at different points in the kernel around the same time).
This causes a problem because our support at the TCC for the TBEs
overwrites the information about the GPU bypassing bits (SLC, GLC) every
time. The problem is when the second (non-GLC) load reaches the TCC, it
overwrites the SLC/GLC information for the first (GLC) load. Thus, when
the the first load returns from the directory/memory, it no longer has
the GLC bit set, which causes an assert failure at the TCP.
After talking with other developers, it was decided the best way handle
this and attempt to model real hardware more closely was to move the
point at which requests are put to sleep on the wakeup buffer from the
TCC to the directory. Accordingly, this patch includes support for that
-- now when multiple loads (bypassing or non-bypassing) from different
CUs reach the directory, all but the first one will be forced to wait
there until the first one completes, then will be woken up and
performed. This required updating the WTRequestor information at the
TCC to pass the information about what CU performed the original request
for loads as well (otherwise since the TBE can be updated by multiple
pending loads, we can't tell where to send the final result to). Thus,
I changed the field to be named CURequestor instead of WTRequestor since
it is now used for more than stores. Moreover, I also updated the
directory to take this new field and the GLC information from incoming
TCC requests and then pass that information back to the TCC on the
response -- without doing this, because the TBE can be updated by
multiple pending, concurrent requests we cannot determine if this memory
request was a bypassing or non-bypassing request. Finally, these
changes introduced a lot of additional contention and protocol stalls at
the directory, so this patch converted all directory uses of z_stall to
instead put requests on the wakeup buffer (and wake them up when the
current request completes) instead. Without this, protocol stalls cause
many applications to deadlock at the directory.
However, this exposed another issue at the TCC: other applications
(e.g., HACC) have a mix of atomics and non-atomics to the same cache
line in the same kernel. Since the TCC transitions to the A state when
an atomic arrives. For example, after the first pending load returns to
the TCC from the directory, which causes the TCC state to become V, but
when there are still other pending loads at the TCC. This causes invalid
transition errors at the TCC when those pending loads return, because
the A state thinks they are atomics and decrements the pending atomic
count (plus the loads are never sent to the TCP as returning loads).
This patch fixes this by changing the TCC TBEs to model the number of
pending requests, and not allowing atomics to be issued from the TCC
until all prior, pending non-atomic requests have returned.
Change-Id: I37f8bda9f8277f2355bca5ef3610f6b63ce93563
- resources field in workload now supports a dict with resources id and
version.
- Older workload JSON are still supported but added a deprecation waring
This commit optimizes the address generation logic in the strided
prefetcher by introducing the following changes
(d is the degree of the prefetcher)
* Evaluate the fixed prefetch_stride only once (and not d-times)
* Replace 2d multiplications (d * prefetch_stride and distance *
prefetch_stride) with additions by updating the new base prefetch
address while looping
Change-Id: I49c52333fc4c7071ac3d73443f2ae07bfcd5b8e4
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
Reviewed-by: Tiberiu Bucur <tiberiu.bucur@arm.com>
The Stride Prefetcher will skip this number of strides ahead of the
first identified prefetch, then generate `degree` prefetches at
`stride` intervals. A value of zero indicates no skip (i.e. start
prefetching from the next identified prefetch address).
This parameter can be used to increase the timeliness of prefetches by
starting to prefetch far enough ahead of the demand stream to cover
the memory system latency.
[Richard Cooper <richard.cooper@arm.com>:
- Added detail to commit comment and `distance` Param documentation.
- Changed `distance` Param from `Param.Int` to `Param.Unsigned`.
]
Change-Id: I6c4e744079b53a7b804d8eab93b0f07b566f0c08
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Signed-off-by: Richard Cooper <richard.cooper@arm.com>
Currently, the GPU SQC (L1I$) and TCP (L1D$) have a performance bug
where they do not behave correctly when multiple requests to the same
cache line overlap one another. The intended behavior is that if the
first request that arrives at the Ruby code for the SQC/TCP misses, it
should send a request to the GPU TCC (L2$). If any requests to the
same cache line occur while this first request is pending, they should
wait locally at the L1 in the MSHRs (TBEs) until the first request has
returned. At that point they can be serviced, and assuming the line
has not been evicted, they should hit.
For example, in the following test (on 1 GPU thread, in 1 WG):
load Arr[0]
load Arr[1]
load Arr[2]
The expected behavior (confirmed via profiling on real GPUs) is that
we should get 1 miss (Arr[0]) and 2 hits (Arr[1], Arr[2]) for such a
program.
However, the current support in the VIPER SQC/TCP code does not model
this correctly. Instead it lets all 3 concurrent requests go straight
through to the TCC instead of stopping the Arr[1] and Arr[2] requests
locally while Arr[0] is serviced. This causes all 3 requests to be
classified as misses.
To resolve this, this patch adds support into the SQC/TCP code to
prevent subsequent, concurrent requests to a pending cache line from being
sent in parallel with the original one. To do this, we add an
additional transient state (IV) to indicate that a load is pending to
this cache line. If a subsequent request of any kind to the same cache
line occurs while this load is pending, the requests are put on the
local wait buffer and woken up when the first request returns to the
SQC/TCP. Likewise, when the first load is returned to the SQC/TCP, it
transitions from IV --> V.
As part of this support, additional transitions were also added to
account for corner cases such as what happens when the line is evicted
by another request that maps to the same set index while the first load
is pending (the line is immediately given to the new request, and when
the load returns it completes, wakes up any pending requests to the same
line, but does not attempt to change the state of the line) and how GPU
bypassing loads and stores should interact with the pending requests
(they are forced to wait if they reach the L1 after the pending,
non-bypassing load; but if they reach the L1 before the non-bypassing
load then they make sure not to change the state of the line from IV if
they return before the non-bypassing load).
As part of this change, we also move the MSHR behavior from internally
in the GPUCoalescer for loads to the Ruby code (like all other
requests). This is important to get correct hits and misses in stats
and other prints, since the GPUCoalescer MSHR behavior assumes all
requests serviced out of its MSHR also miss if the original request to
that line missed.
Although the SQC does not support stores, the TCP does. Thus,
we could have applied a similar change to the GPU stores at the TCP.
However, since the TCP support assumes write-through caches and does not
attempt to allocate space in the TCP, we elected not to add this support
since it seems to run contrary to the intended behavior (i.e., the
intended behavior seems to be that writes just bypass the TCP and thus
should not need to wait for another write to the same cache line to
complete).
Additionally, making these changes introduced issues with deadlocks at
the TCC. Specifically, some Pannotia applications have accesses to the
same cache line where some of the accesses are GLC (i.e., they bypass
the GPU L1 cache) and others are non-GLC (i.e., they want to be cached
in the GPU L1 cache). We have support already per CU in the above code.
However, the problem here is that these requests are coming from
different CUs and happening concurrently (seemingly because different
WGs are at different points in the kernel around the same time).
This causes a problem because our support at the TCC for the TBEs
overwrites the information about the GPU bypassing bits (SLC, GLC) every
time. The problem is when the second (non-GLC) load reaches the TCC, it
overwrites the SLC/GLC information for the first (GLC) load. Thus, when
the the first load returns from the directory/memory, it no longer has
the GLC bit set, which causes an assert failure at the TCP.
After talking with other developers, it was decided the best way handle
this and attempt to model real hardware more closely was to move the
point at which requests are put to sleep on the wakeup buffer from the
TCC to the directory. Accordingly, this patch includes support for that
-- now when multiple loads (bypassing or non-bypassing) from different
CUs reach the directory, all but the first one will be forced to wait
there until the first one completes, then will be woken up and
performed. This required updating the WTRequestor information at the
TCC to pass the information about what CU performed the original request
for loads as well (otherwise since the TBE can be updated by multiple
pending loads, we can't tell where to send the final result to). Thus,
I changed the field to be named CURequestor instead of WTRequestor since
it is now used for more than stores. Moreover, I also updated the
directory to take this new field and the GLC information from incoming
TCC requests and then pass that information back to the TCC on the
response -- without doing this, because the TBE can be updated by
multiple pending, concurrent requests we cannot determine if this memory
request was a bypassing or non-bypassing request. Finally, these
changes introduced a lot of additional contention and protocol stalls at
the directory, so this patch converted all directory uses of z_stall to
instead put requests on the wakeup buffer (and wake them up when the
current request completes) instead. Without this, protocol stalls cause
many applications to deadlock at the directory.
However, this exposed another issue at the TCC: other applications
(e.g., HACC) have a mix of atomics and non-atomics to the same cache
line in the same kernel. Since the TCC transitions to the A state when
an atomic arrives. For example, after the first pending load returns to
the TCC from the directory, which causes the TCC state to become V, but
when there are still other pending loads at the TCC. This causes invalid
transition errors at the TCC when those pending loads return, because
the A state thinks they are atomics and decrements the pending atomic
count (plus the loads are never sent to the TCP as returning loads).
This patch fixes this by changing the TCC TBEs to model the number of
pending requests, and not allowing atomics to be issued from the TCC
until all prior, pending non-atomic requests have returned.
Change-Id: I37f8bda9f8277f2355bca5ef3610f6b63ce93563
The current GPU TCP (L1D$) Ruby SLICC code had a bug where a GPU
load that wants to bypass the L1D$ (e.g., GLC or SLC bit was set)
but the line is in Invalid when that request arrives, results in
a non-bypassing load being sent to the GPU TCC (L2$) instead of
a bypassing load.
This issue was not caught by currently nightly or weekly tests,
because the tests do not test for correctness in terms of hits
and misses in the caches. However, tests for these corner cases
expose this issue.
To fix, this, this patch removes the check that the entry is valid
when deciding what to do with a bypassing GPU load -- since the
TCP Ruby code has transitions for bypassing loads in both I and V,
we can simply call the LoadBypassEvict event in both cases and the
appropriate transition will handle the bypassing load given the
cache line's current state in the TCP.
Change-Id: Ia224cefdf56b4318b2bcbd0bed995fc8d3b62a14
Print extra logs for the full/partial read/write access to the registers
through the register bank. The debug flag is empty by default and would
not print anything.
Test: run unittest of dev/reg_bank.test.xml to check the behavior would
not affect the original functionality.
run gem5 with debug flags and use m5term to poke on registers.
mtvec.mode is extended in the new riscv proposal, like fast interrupt.
This change moves that part from Fault class to ISA class for
extendable.
Ref: https://github.com/riscv/riscv-fast-interrupt
Since returned data is not needed for AtomicNoReturn and Store memory
requests, the coalescer need not spend time writing in dummy data for
packets of these types.
Change-Id: Ie669e8c2a3bf44b5b0c290f62c49c5d4876a9a6a
Recent breaking changes in the DRAMSys API require user code to be
updated. These updates have been applied to the gem5 integration.
Furthermore, as DRAMSys started to use CMake dependency management,
it is no longer sensible to maintain two separate build systems for
DRAMSys. The use of the DRAMSys integration in gem5 will therefore
from now on require that CMake is installed on the target machine.
Additionally, support for snapshots have been implemented into DRAMSys
and coupled with gem5's checkpointing API.
This commit fixes a violation of the TLM2.0 protocol as well as a
bug regarding back-pressure:
- In the BEGIN_REQ phase, transaction objects are required to set
their response status to TLM_INCOMPLETE_RESPONSE. This was not
the case in the packet2payload function that converts gem5 packets
to TLM2.0 generic payloads.
- When the target applies back-pressure to the initiator, an assert
condition was triggered as soon as the response is retried. The
cause of this was an unintentional nullptr-access into a map.
Augmenting Datablock and WriteMask to support optional arg to
distinguish between return and no return. In the case of atomic no
return requests, log entries should not be created when performing the
atomic.
Change-Id: Ic3112834742f4058a7aa155d25ccc4c014b60199a
Added a resource constraint, AtomicALUOperation, to GLC atomics
performed in the TCC.
The resource constraint uses a new class, ALUFreeList array. The class
assumes the following:
- There are a fixed number of atomic ALU pipelines
- While a new cache line can be processed in each pipeline each cycle,
if a cache line is currently going through a pipeline, it can't be
processed again until it's finished
Two configuration parameters have been used to tune this behavior:
- tcc-num-atomic-alus corresponds to the number of atomic ALU pipelines
- atomic-alu-latency corresponds to the latency of atomic ALU pipelines
Change-Id: I25bdde7dafc3877590bb6536efdf57b8c540a939
pkt->req->isCacheMaintenance() would not include a check
for clean eviction before notifying the prefetcher,
causing gem5 to crash.
Change-Id: I1d082a87a3908b1ed46c5d632d45d8b09950b382
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Update the default prefetch options to achieve out-of-the box
prefetcher performance closer to that which a typical user would
expect. Configurations that set these parameters explicitly will be
unaffected.
The new defaults were identified as part of work on gem5 prefetchers
undertaken by Nikolaos Kyparissas while on internship at Arm.
Change-Id: Id63868c7c8f00ee15a0b09a6550780a45ae67e55
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Prefetch queue entries were being squashed by comparing the address
of each queued prefetch against the block address of the demand
access. Only prefetches that happen to fall on a cache-line block
boundary would be squashed.
This patch converts the prefetch addresses to block addresses before
comparison.
Change-Id: I55ecb4919e94ad314b91c7795bba257c550b1528
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This reverts gem5#133, the temporary work-around for gem5#131, allowing
both SLC and GLC atomic requests to be made in the GPU tester.
The underlying issues behind gem5#131 have been resolved by gem5#367 and
gem5#397.
mem-ruby, gpu-compute: fix formatting of TCC
Fix several not properly indented prints and extraneous extra lines in
the SLICC code for the GPU TCC (L2 cache).
mem-ruby, gpu-compute: fix typo in GPU coalescer deadlock print
The GPU Coalescer's deadlock print did not previously print a newline at
the end of each deadlock, which caused confusion when there were
multiple deadlocks as each deadlock print would appear to go with the
address after it. This patch fixes this issue.
gpu-compute: Fix typo with GPUTLB print
Print was not properly ending in a newline, which caused confusion when
looking a trace with GPUTLB enabled. This fixes that.
mem-ruby, gpu-compute: fix GPU SQC/TCP Ruby formatting
Fix several not properly indented prints and extraneous extra lines in
the SLICC code for the GPU SQC (L1I$) and TCP (L1D$).
Symbol type is part of the info provided by an ELF object's symtab.
It indicates whether a symbol is a file symbol, or a function symbol,
etc.
This chain of commits introduces a way to only load function symbols
to the gem5's symbol table. The RISC-V BootloaderKernelWorkload now
loads only function symbols from the bootloader and the kernel binaries
by default.
arch-riscv: Fix implementation of CMO extension instructions
This change introduces a template for store instruction's mem access.
The new template is called CacheBlockBasedStore.
The reasons for not reusing the current Store's mem access template
are as follows,
- The CMO extension instructions operate on cache block size
granularity,
while regular load/store instructions operate on data of size 64 bits or
fewer.
- The writeMemAtomicLE/writeMemTimingLE interfaces do not allow passing
nullptr as data. However, CPUs in gem5 rely on (data == NULL) to detect
CACHE_BLOCK_ZERO instructions. Setting `Mem = 0;` to `uint64_t Mem;`
does not solve the problem as the reference is allocated and thus,
it's always true that `&Mem != NULL`. This change uses the
writeMemAtomic/writeMemTiming interfaces instead.
- Per CMO v1.0.1, the instructions in the spec do not generate
address misaligned faults.
- The CMO extension instructions do not use IMM.
---
arch-riscv: Fix generateDisassembly for Store with 1 source reg
Currently, store instructions are assumed to have two source registers.
However, since we are supporting the RISC-V CMO instructions, which
are Store instructions in gem5 but they only have one source register.
This change allows printing disassembly of Store instructions with
one source register.
---
arch-riscv: Make Zicbom/Zicboz extensions optional in FS mode
Currently, we're enable Zicbom/Zicboz by default. Since those
extensions might be buggy as they are not well-tested, making
those entensions optional allows running simulation where
the performance implication of the instructions do not matter.
Effectively, by turning off the extensions, we simply remove
those extensions from the device tree, so the OS would not
use them. It doesn't prohibit the userspace application to
use those instructions, however.
---
arch-riscv: Add all supporting Z extensions to RISC-V isa string
mem-ruby: update RubyRequest print to include GPU fields
The print function used for RubyRequests did not include the GPU
specific fields (for the GLC and SLC bits, which are cache modifiers
that specify what level of the memory hierarchy a request should be
performed at). This causes confusion when the GPU Ruby SLICC code prints
out RubyRequest messages, since important fields are missing.
Thus this commit adds that support. Since these fields are already part
of the RubyRequest class, and are always 0 for non-GPU requests, it
should not affect other components beyond slightly longer prints.
Change-Id: I31c9122b82dfa2c6415ce25d225ea82cb35c7333
Made the following changes to fix the behavior of GLC atomics in a WB
L2:
- Stored atomic write mask in TBE For GLC atomics on an invalid line
that bypass to the directory, but have their atomics performed on the
return path.
- Replaced !presentOrAvail() check for bypassing atomics to directory
(which will then be performed on return path), with check for invalid
line state.
- Replaced wdb_writeDirtyBytes action used when performing atomics with
owm_orWriteMask action that doesn't write from invalid atomic request
data block
- Fixed atomic return path actions
Change-Id: I6a406c313d2f9c88cd75bfe39187ef94ce84098f
Previously the GPU L1 I$ (SQC) was not updating the MRU information on
hits in the SQC. This commit resolves that by adding support to the
appropriate Ruby transition.
Previously, opening a config file (such as
`configs/example/hmc_hello.py`) containing non-ASCII characters causes
UnicodeDecodeError.
Also switch to use more an more idiomatic context manager for handling
files.
Change-Id: Ia39cbe2c420e9c94f3a84af459b7e5f4d9718d14
An integer division in the compression:Base:getSize() was being done,
which led to rounding down instead of up.
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
The print function used for RubyRequests did not include the GPU
specific fields (for the GLC and SLC bits, which are cache modifiers
that specify what level of the memory hierarchy a request should be
performed at). This causes confusion when the GPU Ruby SLICC code
prints out RubyRequest messages, since important fields are missing.
Thus this commit adds that support. Since these fields are already
part of the RubyRequest class, and are always 0 for non-GPU requests,
it should not affect other components beyond slightly longer prints.
Change-Id: I31c9122b82dfa2c6415ce25d225ea82cb35c7333
- resources field in workload now supports a dict with resources id
and version.
- Older workload JSON are still supported but added a deprecation waring
Change-Id: I137dbb99799a5294e84ce7d5d914f05e4cfe9e00
GPR allocation is using fields in the AMD kernel code structure which
are not backwards compatible and are not populated in more recent
compiler versions. Use the granulated fields instead which is enfored to
be backwards compatible.
Change-Id: I718716226f5dbeb08369d5365d5e85b029027932
