This file helps map committers' ids to a canonical name and email. This
is useful for tracking the same committer over time.
I've done my best to map the ids manually. I've tried to choose current
institutions/emails for the people that I personally know, but I am sure
to have missed many. Feel free to correct your own!
Change-Id: I17d57368a2ecb056025a6dabef37485ec5ce6aa9
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29672
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
fs.py warns when an Arm platform is being created without a DTB file,
if the platform does not support the automatic creation of a DTB.
Updated the list of supported platforms with recent additions in order
to remove incorrect and potentially confusing warnings.
Change-Id: I549124a1afbc36e313f614dccab17973582bc3f7
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30575
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
This commit implements SelfHosted Debug Software step as is defined in
Armv8 Reference manual chapter D2.
+ decoder.hh/cc/isa: Checks the software step bit in order to skip the instruction
before its decode.
+ faults.hh/cc: implemented SoftwareStep exception and proper modification
of spsr during the invoke of other exceptions
+ isa.cc: Set debug mask if needed during cpsr modification
+ tlb.cc: Checks if software step is in ACTIVE state to avoid trigger
breakpoint or watchpoint exception
+ self_debug.hh/cc: Implementation of State change and ss bit based during eret.
+ types.hh: Define sofware step flags like step, load or stepped to check the different flags
that triggering software step should use for the ISS code.
+ pseudo.hh/isa: Triggers the sofware step esception after decode.
+ static_inst.cc: Call debugExceptionReturnsSS durint eret routine.
Change-Id: I3a64507c64842c34c76ad7f6daa5f4306bd55d2c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30617
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adds support for device memories in the system and RubySystem classes.
Devices may register memory ranges with the system class and packets
which originate from the device MasterID will update the device memory
in Ruby. In RubySystem functional access is updated to keep the packets
within the Ruby network they originated from.
Change-Id: I47850df1dc1994485d471ccd9da89e8d88eb0d20
JIRA: https://gem5.atlassian.net/browse/GEM5-470
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29653
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This commit makes it possible to make invocations such as:
gem5.opt se.py --stats-root 'system.cpu[:].dtb' --stats-root 'system.membus'
When --stats-root is given, only stats that are under any of the root
SimObjects get dumped. E.g. the above invocation would dump stats such as:
system.cpu0.dtb.walker.pwrStateResidencyTicks::UNDEFINED
system.cpu1.dtb.walker.pwrStateResidencyTicks::UNDEFINED
system.membus.pwrStateResidencyTicks::UNDEFINED
system.membus.trans_dist::ReadReq
but not for example `system.clk_domain.clock`.
If the --stats-root is given, only new stats as defined at:
Idc8ff448b9f70a796427b4a5231e7371485130b4 get dumped, and old ones are
ignored. The commits following that one have done some initial conversion
work, but many stats are still in the old format.
Change-Id: Iadaef26edf9a678b39f774515600884fbaeec497
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28628
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change includes ArmV8 SelfDebug Watchpoint implementation
as is described in Armv8 Reference manual D2/G2
The changes specific descriptions are as follow:
+ ArmISA.py: Enable up to 16 DBGWn registers
+ isa.cc: Include in setMiscReg specific cases for DBGWCn registers enable bit
+ miscregs_types.hh: Define DBGWC bitwise types
+ miscregs.hh/cc: Definition of watchpoint registers and its initialization
+ tlb.cc: Call for watchpoint entry point on tlb translation for dtlb.
+ fault.cc/hh: Definition/implementation of Watchpoint exception and
modification on DataAbort Exception accordingly to handle
AArch32 Watchpoint exceptions.
+ types.hh: Exception Code for watchpoint.
+ self_debug.cc/hh: Watchpoint check and comparison. Definition and
implementation of all the watchpoint auxiliar functions.
Change-Id: If275e4df0d28918dd887ab78166e653da875310a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28589
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
This change accidentally left out a "break" which gcc found and
complained about.
arch-arm: Implementation of Hardware Breakpoint exception
This change adds in the break based on the assumption that the function
should not fall through that case to the next.
Change-Id: Id728a0c9a504d1b6d231d3fe1e7c5ece05d3ac4d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30654
Reviewed-by: Jordi Vaquero <jordi.vaquero@metempsy.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The alignment spaces in stats.txt takes up a lot of space and increases
simulation time, this commit adds the option to disable them with:
--stats-file stats.txt?spaces=False
Sample old lines with ?desc=False:
system.cpu.op_class::FloatMultAcc 0 0.00% 65.92%
system.cpu.op_class::FloatDiv 0 0.00% 65.92%
Sample new lines with ?desc=False;spaces=False:
system.cpu.op_class::FloatMultAcc 0 0.00% 65.92%
system.cpu.op_class::FloatDiv 0 0.00% 65.92%
On a 1000 dumpstats m5op loop spaces=False reduces:
* size: from 38MB to 20MB
* time: from 4.5s to 3.5s
Change-Id: Ib738b996b5646c329094cf61aaa1d977e844e759
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28627
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This code implementes hardware breakpoint exception as part of
software debug explained in ARMv8 reference manual ChapterD2.
+ ArmISA.py: Modify register to allow up to 15 Breakpoint registers
+ Sconscript: Add new file self_debug
+ faults.cc/hh: Defintion and implementation of HardwareBreakpoint
exception inheriting ArmFault.
+ isa.cc/hh: ArmISA contains now an attribute pointing to the SelfDebug
object that will be used to be access SelfDebug infrastructure
Added special cases for setMiscReg to cache debug enable bits.
+ miscregs.hh/cc: Definition and initialization of DBGDCn and DBGDVn
registers.
+ tlb.cc/hh: We include the access to check for breakpoint instruction as
part of the tlb translation process, checking if it comes from a
fetch in the itlb
+ types.hh: Definition of new bitwise register types.
+ utility.cc/hh: Definition and implementation of auxiliar functions for
the selfDebug.
+ self_debug.hh/cc: Main files that include the implemenattion of
breakpoint checks, selfdebug enable and auxiliar functions.
Change-Id: I0e2a4be7f778de560c512253a9148da61e3e7e7a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27967
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Currently, when an instruction has an operand that reads a const
value, it goes thru the same readMiscReg() api call as other
misc registers (real HW registers, not constant values). There
is an issue, however, when casting from the const values (which are
32b) to higher precision values, like 64b.
This change creates a separate, templated function call to the GPU's
ISA state that will return the correct type.
Change-Id: I41965ebeeed20bb70e919fce5ad94d957b3af802
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29927
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This fixes conditions that perform a redundant check to
see if an unsigned value is greater than or equal to
zero. With gcc 10.x, this generates the following error
because of implicit usage of the "-Werror=type-limits"
flag.
"comparison of unsigned expression in '>= 0' is always true"
Change-Id: Ib1a88035ef5fba410d18de0adf614db4bc634faf
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30474
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch sets the faulting flag in atomic, timing, minor and o3 CPU
models.
It also fixes the minor/timing CPU models which were not respecting the
ExecFaulting flag. This is now checked before calling dump() on the
tracing object, to bring it in line with the other CPU models.
Change-Id: I9c7b64cc5605596eb7fcf25fdecaeac5c4b5e3d7
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30135
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch adds a faulting flag to InstRecord.
This allows tracers to identify that the traced instruction has
faulted, when ExecFaulting is enabled. It can be set with
InstRecord::setFaulting() and read with Instrecord::getFaulting().
Change-Id: I390392d59de930533eab101e96dc4d3c76500748
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30134
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
We already provide to the user the CCFLAGS_EXTRA, LDFLAGS_EXTRA
variables to pass flags to scons when compiling/linking gem5.
Those variables are not passed to the marshal object.
We add an extra pair:
MARSHAL_CCFLAGS_EXTRA, MARSHAL_LDFLAGS_EXTRA
to add flag injection capabilities to the marshal object.
The patch is also renaming base_py_env to marshal_env.
This happens for 2 reasons:
1) At the moment the marshal compilation is the only task
making use of the base python environment.
2) Consistency with the EXTRA variable names added with this patch.
I could have named them as BASE_XXFLAGS_EXTRA, but it seems too much
generic and users might be confused by that, as they might think
the BASE_XXFLAGS_EXTRA is a subset of the XXFLAGS_EXTRA so that
setting it will affect gem5 compilation as well.
Change-Id: I3e420caa897059455ff8f35462db2b38da050e93
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30016
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
