These are not yet consumed by anything, but convert all the settings
from SCons variables to Kconfig variables.
If you have existing SConsopts files which need to be converted, you
should take a look at KCONFIG.md to learn about how kconfig is used in
gem5. You should decide if any variables need to be available to C++ or
kconfig itself, and whether those are options which should be detected
automatically, or should be up to the user. Options which should be
measured automatically should still be in SConsopts files, while user
facing options should be added to new or existing Kconfig files.
Generally, make sure you're storing c++/kconfig visible options in
env['CONF'][...]. Also remove references to sticky_vars since persistent
options should now be handled with kconfig, and export_vars since
everything in env['CONF'] is now exported automatically.
Switch SCons/gem5 to use Kconfig for configuration, except EXTRAS which
is still a sticky SCons variable. This is necessary because EXTRAS also
controls what config options exist. If it came from Kconfig itself, then
there would be a circular dependency. This dependency could
theoretically be handled by reparsing the Kconfig when EXTRAS
directories were added or removed, but that would be complicated, and
isn't supported by kconfiglib. It wouldn't be worth the significant
effort it would take to add it, just to use Kconfig more purely.
Change-Id: I29ab1940b2d7b0e6635a490452d05befe5b4a2c9
Augmenting Datablock and WriteMask to support optional arg to
distinguish between return and no return. In the case of atomic no
return requests, log entries should not be created when performing the
atomic.
Change-Id: Ic3112834742f4058a7aa155d25ccc4c014b60199a
Augmenting the DataBlock class with a change log structure to
record the effects of atomic operations on a data block and
service these changes if the atomic operations require return
values.
Although the operations are atomic, the coalescer need not
send unique memory requests for each operation. Atomic
operations within a wavefront to the same address are now
coalesced into a single memory request. The response of this
request carries all the necessary information to provide the
requesting lanes unique values as a result of their individual
atomic operations. This helps reduce contention for request
and response queues in simulation.
Previously, only the final value of the datablock after all
atomic ops to the same address was visible to the requesting
waves. This change corrects this behavior by allowing each wave
to see the effect of this individual atomic op is a return value
is necessary.
Change-Id: I639bea943afd317e45f8fa3bff7689f6b8df9395
Clang Version 14 throws a warning "use of bitwise '&/|' with boolean
operands" for cases where bitwise operations are used where boolean
operations are intended.
This occurred in "WriteMast.hh", "data.isa", and "decode.cc" where
boolean values were being compared using the bitwise operands. While
bitwise operations are equivalent, they have been changed to boolean
operations in this patch to avoid the clang-14 warning.
Change-Id: Ic7583e13a325661712c75c8e1b234c4878832352
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/64172
Reviewed-by: Tom Rollet <tom.rollet@huawei.com>
Reviewed-by: Kunal Pai <kunpai@ucdavis.edu>
Maintainer: Bobby Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
This makes what are configuration and what are internal SCons variables
explicit and separate, and makes it unnecessary to call out what
variables to export to C++.
These variables will also be plumbed into and out of kconfiglib in later
changes.
Change-Id: Iaf5e098d7404af06285c421dbdf8ef4171b3f001
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/56892
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Remove the line "For use for simulation and test purposes only" in files
were AMD is the only copyright holder listed in the header. This happens
to be the case for all files where this line exists, removing it
completely from gem5.
Change-Id: I623f266b002f564301b28774f49081099cfc60fd
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/53943
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
These were not caught by the previous patches because
the grep used ignored:
- anonymous structures
(e.g., "struct {")
- opening braces without leading spaces
(e.g., "struct Name{"),
- weird chars in auto-generation files
(e.g., "struct $name {").
- extra characters after the opening brace.
(e.g., "struct Name { // Comment")
- typedefs (note that this is not caught by the verifier)
(e.g., "typedef struct Name {")
Most of this has been fixed be grepping structures
with the following regex:
grep -nrE --exclude-dir=systemc \
"^ *(typedef)* *(struct|class|enum|union) [^{]*{$" src/
The following makes sure that "struct{" is captured:
grep -nrE --exclude-dir=systemc \
"^ *(struct|class|enum|union){" src/
To find cases that contain a comment after the
opening brace:
grep -nrE --exclude-dir=systemc \
"^ *(struct|class|enum|union)[^{]*{\s*//" src/
Change-Id: I9f822bed628d13b1a09ccd6059373aff63a8d7bd
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/43505
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The systemc dir was not included in this fix.
First it was identified that there were only occurrences
at 0, 1, 2 and 3 levels of indentation (and a single
occurrence of 2 and 3 spaces), using:
grep -nrE --exclude-dir=systemc \
"^ *struct [A-Za-z].* {$" src/
Then the following commands were run to replace:
<indent level>struct X ... {
by:
<indent level>struct X ...
<indent level>{
Level 0:
grep -nrl --exclude-dir=systemc
"^struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^struct ([A-Za-z].*) \{$/struct \1\n\{/g'
Level 1:
grep -nrl --exclude-dir=systemc \
"^ struct [A-Za-z].* {$" src/ | \
xargs sed -Ei \
's/^ struct ([A-Za-z].*) \{$/ struct \1\n \{/g'
and so on.
Change-Id: I362ef58c86912dabdd272c7debb8d25d587cd455
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39017
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch add a new Ruby cache coherence protocol based on Arm' AMBA5
CHI specification. The CHI protocol defines and implements two state
machine types:
- Cache_Controller: generic cache controller that can be configured as:
- Top-level L1 I/D cache
- A intermediate level (L2, L3, ...) private or shared cache
- A CHI home node (i.e. the point of coherence of the system and
has the global directory)
- A DMA requester
- Memory_Controller: implements a CHI slave node and interfaces with
gem5 memory controller. This controller has the functionality of a
Directory_Controller on the other Ruby protocols, except it doesn't
have a directory.
The Cache_Controller has multiple cache allocation/deallocation
parameters to control the clusivity with respect to upstream caches.
Allocation can be completely disabled to use Cache_Controller as a
DMA requester or as a home node without a shared LLC.
The standard configuration file configs/ruby/CHI.py provides a
'create_system' compatible with configs/example/fs.py and
configs/example/se.py and creates a system with private L1/L2 caches
per core and a shared LLC at the home nodes. Different cache topologies
can be defined by modifying 'create_system' or by creating custom
scripts using the structures defined in configs/ruby/CHI.py.
This patch also includes the 'CustomMesh' topology script to be used
with CHI. CustomMesh generates a 2D mesh topology with the placement
of components manually defined in a separate configuration file using
the --noc-config parameter.
The example in configs/example/noc_config/2x4.yaml creates a simple 2x4
mesh. For example, to run a SE mode simulation, with 4 cores,
4 mem ctnrls, and 4 home nodes (L3 caches):
build/ARM/gem5.opt configs/example/se.py \
--cmd 'tests/test-progs/hello/bin/arm/linux/hello' \
--ruby --num-cpus=4 --num-dirs=4 --num-l3caches=4 \
--topology=CustomMesh --noc-config=configs/example/noc_config/2x4.yaml
If one doesn't care about the component placement on the interconnect,
the 'Crossbar' and 'Pt2Pt' may be used and they do not require the
--noc-config option.
Additional authors:
Joshua Randall <joshua.randall@arm.com>
Pedro Benedicte <pedro.benedicteillescas@arm.com>
Tuan Ta <tuan.ta2@arm.com>
JIRA: https://gem5.atlassian.net/browse/GEM5-908
Change-Id: I856524b0afd30842194190f5bd69e7e6ded906b0
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/42563
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Added mapAddressToDownstreamMachine that may be used by the protocols
to map an address to different target donwstream controller of the same
type.
These functions do not use the global mapping provided by the network
and map addresses to one of the controllers specified in the
downstream_destinations parameter.
This change facilitates reusing the same cache state-machine/controllers
to model different levels of the cache hierarchy.
Change-Id: I9a202e9461e0d2f16ed232ff8b60bbde2d15570d
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31415
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Messages may be enqueued and be ready in the same cycle.
Using this feature may introduce nondeterminism in the protocol and
should be used in specific cases. A case study is to avoid needing an
additional cycle for internal protocol triggers (e.g. the All_Acks
event in src/mem/ruby/protocol/MOESI_CMP_directory-L2cache.sm).
To mitigate modeling mistakes, the 'allow_zero_latency' parameter must
be set for a MessageBuffer where this behavior is acceptable.
This changes also updates the Consumer to schedule events according to
this new behavior. The original implementation would not schedule a new
wakeup event if the wakeup for the Consumer had already been executed
in that cycle.
Additional authors:
- Tuan Ta <tuan.ta2@arm.com>
Change-Id: Ib194e7b4b4ee4b06da1baea17c0eb743f650dfdd
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31255
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This upgrades the garnet model to support HeteroGarnet
1) Static and dynamic multi-freq domains in network
2) Support for CDC
3) Separate links for each message class
4) Separate linkwidth for each message class
5) Support for SerDes
Change-Id: I6d00e3b5cb3745e849d221066cb46b2138c47871
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/32597
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Adding getter and setter methods for getting and setting the atomic ops
in the WriteMask class. This allows for message types with WriteMasks to
get or set the atomic ops without explicitly modifying the constructor
for the message type. This will beused by the DMASequencer which uses the
SequencerMsg type where the constructor is auto generated via SLICC.
Change-Id: I71787d294c1b89547618e9a13e386b65bb3e1021
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31474
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The RubyPrefetcher uses makeNextStrideAddress() with
a negative stride to find prefetched address.
The type of this expression is:
uint64_t + uint32_t * int;
This gives wrong result due to implicit conversion.
Fix this with static cast and it works correctly:
uint64_t + int * int;
Change-Id: I36e17e00d5c66c3699fe1d5b287971225a162d04
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31314
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Previously, with HSAIL, we were guaranteed by the HSA specification
that the GPU will never issue unaligned accesses. However, now
that we are directly running GCN this is no longer true.
Accordingly, this commit adds support for unaligned accesses.
Moreover, to reduce the replication of nearly identical
code for the different request types, I also added new helper
functions that are called by all the different memory request
producing instruction types in op_encodings.hh.
Adding support for unaligned instructions requires changing
the statusBitVector used to track the status of the memory
requests for each lane from a bit per lane to an int per lane.
This is necessary because an unaligned access may span multiple
cache lines. In the worst case, each lane may span multiple
cache lines. There are corresponding changes in the files that
use the statusBitVector.
Change-Id: I319bf2f0f644083e98ca546d2bfe68cf87a5f967
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/29920
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
makeLineAddress function uses m_block_size_bits to create
masked addresses. m_block_size_bits is used to specify
cache, directory, and memory controller interleaving,
and it can be larger than the cache line size.
To generate addresses that can align with the cache line
rather than the interleaving granularity, a version of
makeLineAddress is created to specify bits that need to
be masked.
Change-Id: I06deec4949da7fa46f1d6f7575334f18ee61c786
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28135
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Onur Kayıran <onur.kayiran@amd.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Add NUMBER_BITS_PER_SET environment variable to control
the size of the bitmask in Set.hh (default=64).
Necessary for configs which require >64 instances of a given
machine type. This can be set in the build_opts file, e.g.
by adding the following line:
NUMBER_BITS_PER_SET = <number>
Change-Id: I314a3cadca8ce975fcf4a60d9022494751688e88
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18968
Reviewed-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Standardize all header guards in the mem directory according to the most
frequent patterns. In general they have the form:
mem: __FOLDER_TREE_FILE_NAME_HH__
ruby: __FOLDER_TREE_FILENAME_HH__
Change-Id: I983853e292deb302becf151bf0e970057dc24774
Reviewed-on: https://gem5-review.googlesource.com/7881
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
These files aren't a collection of miscellaneous stuff, they're the
definition of the Logger interface, and a few utility macros for
calling into that interface (panic, warn, etc.).
Change-Id: I84267ac3f45896a83c0ef027f8f19c5e9a5667d1
Reviewed-on: https://gem5-review.googlesource.com/6226
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>
Result of running 'hg m5style --skip-all --fix-control -a' to get
rid of '== true' comparisons, plus trivial manual edits to get
rid of '== false'/'== False' comparisons.
Left a couple of explicit comparisons in where they didn't seem
unreasonable:
invalid boolean comparison in src/arch/mips/interrupts.cc:155
>> DPRINTF(Interrupt, "Interrupts OnCpuTimerINterrupt(tc) == true\n");<<
invalid boolean comparison in src/unittest/unittest.hh:110
>> "EXPECT_FALSE(" #expr ")", (expr) == false)<<
