All ISAs except SPARC can now take multiple disk images by passing
the --disk-image option multiple times.
Before this patch, several ISAs automatically mounted a secondary disk
called "linux-bigswap2.img", which had to be in M5_PATH even if the end
user did not want more than one disk. This was the case for for example
for X86 but not ARM.
This change was done to:
* allow ARM to have a second disk image in fs.py, which was not possible,
and allow other ISAs like X86 and ARM to take any number of disk images
* provide a simpler, more intuitive CLI interface that does not require
magic disk images to be present in M5_PATH to work for ISAs such as X86.
Linux does not need that secondary image to boot correctly, so it is
more friendly to support a minimal setup that requires the least amount
of binaries to boot, and let supply the second image manually only if
they need it.
* make fs.py --disk-image work more similarly across all ISAs
SPARC was left with a single disk only because its setup was a bit more
complex and would require further testing.
Change-Id: I8b6e08ae6daf0a5b6cd1d57d285a9677f01eb7ad
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23671
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Other scripts (like se.py) blindly try to apply the indirect predictor
if one is set. Because this option defaults to something, there's no
way (as far as I know) to purposefully select nothing, and so the
simulator crashes. Users shouldn't have to proactively prevent gem5
from killing itself regardless, so the default was changed to "None".
Change-Id: Ic3382b8065442d6705b1c6a656646598d9d5c322
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23360
Reviewed-by: Ciro Santilli <ciro.santilli@arm.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
9p allows the guest Linux kernel to mount a host directory into the guest.
This allows to very easily modify test programs after a run at the end of
boot, without the need to re-insert the changes into a disk image.
It is enabled on both fs.py and fs_bigLITTLE.py with the --vio-9p
option.
Adapted from code originally present on the wiki: http://gem5.org/WA-gem5
As documented in the CLI option help, the current setup requires the guest
to know the full path to the host share, which is annoying, but overcoming
that would require actually parsing a bit of the protocol rather than just
forwarding everything to diod.
Change-Id: Iaeb1ed185dccfa8332fe6657a54e7550f64230eb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22831
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This is the second step towards being able to run dynamically linked
applications when the guest ISA != than host ISA.
Once the guest interpreter is loaded to memory, we are able to redirect
shared object loads through the redirectPath interface.
How do we load the guest interpreter?
The elf file is for example asking for the /lib/ld-linux-aarch64.so
interpreter.
That would point to a valid dynamic linker/loader if guest ISA == host
ISA, but if we are running on X86 we should point to the guest
(aarch64 in the example) toolchain wherever it is installed.
This patch is adding the --interp-dir option to point to the parent
folder of the guest /lib in the host fs.
Change-Id: Id27b97c060008d2e847776a49323d45c8809a27f
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23066
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This is the first step towards being able to run dynamically linked
applications when the guest ISA != than host ISA.
(Like running a arm application on x86)
By using the --redirects command line option it is possible to specify
via CLI a set of path redirections to be used in SE mode.
This is needed when running a dynamically linked binary in
SE mode in a guest ISA different than the host. The linker will look
for SOs (e.g. libc.so) in /lib/, but will only find the host libraries.
With this option we can redirect to the guest toolchain/file system.
Usage:
gem5.opt [example script]
--redirects /dir1=/path/to/host/dir1 \
--redirects /dir2=/path/to/host/dir2
Change-Id: I558838be2ad6802891707e9a1cc454786859db15
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23065
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adding an option to enable DRAM low-power states. The low power
states can have a significant impact on application performance
(sim_ticks) on the order of 2-3x, especially for compute-gpu apps.
The options allows for it to easily be enabled/disabled to compare
performance numbers. The option is disabled by default.
Change-Id: Ib9bddbb792a1a6a4afb5339003472ff8f00a5859
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18548
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This change introduces the concept of a faux-filesystem.
The faux-filesystem creates a directory structure in m5out
(or whatever output dir the user specifies) where system calls
may be redirected.
This is useful to avoid non-determinism when reading files
with varying path names (e.g., variations from run-to-run if
the simulation is scheduled on a cluster where paths may change).
Also, this changeset allows circumventing host pseudofiles which
have information specific to the host processor (such as cache
hierarchy or processor information). Bypassing host pseudofiles
can be useful when executing runtimes in the absence of an
operating system kernel since runtimes may try to query standard
files (i.e. /proc or /sys) which are not relevant to an
application executing in syscall emulation mode.
Change-Id: I90821b3b403168b904a662fa98b85def1628621c
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/12119
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Python 2.7 used to return lists for operations such as map and range,
this has changed in Python 3. To make the configs Python 3 compliant,
add explicit conversions from iterators to lists where needed, replace
xrange with range, and fix changes to exec syntax.
This change doesn't fix import paths since that might require us to
restructure the configs slightly.
Change-Id: Idcea8482b286779fc98b4e144ca8f54069c08024
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16002
Reviewed-by: Gabe Black <gabeblack@google.com>
The option allows to set SimObject params from the CLI.
The existing config scripts have a large number of options that simply set
a single SimObject parameter, and many still are not exposed.
This commit allows users to pass arbitrary parameters from the command
line to prevent the need for this kind of trivial option.
Change-Id: Ic4bd36948aca4998d2eaf6369c85d3668efa3944
Reviewed-on: https://gem5-review.googlesource.com/c/12985
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
The AtomicSimpleCPU used to be able to access memory directly to speed
up simulation if no caches are used. This is fine as long as no
switching between CPU models is required. In order to switch to a new
CPU model that requires caches, we currently need to checkpoint the
system and restore it into a new configuration. The new
'atomic_noncaching' memory mode provides a solution that avoids this
issue since caches are bypassed in this mode. This changeset removes
the old fastmem option from the AtomicSimpleCPU and introduces a new
CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU.
The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU
used to use when accessing memory in when fastmem was enabled.
This changeset also introduces a new switcheroo test that tests
switching between a NonCachingSimpleCPU and a TimingSimpleCPU with
caches.
Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12419
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Equips the fs.py config routine with an extra commandline option
--generate-dtb that will generate a dtb file automatically before
running the simulation. Only works with ARM systems and gives a warning
if the simulated system is not of --machine-type VExpress_GEM5_V1.
Change-Id: I7766e5459fd9bec2245de83cef103091ebaf7229
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5968
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
This was added for backwards compatability, but it adds a decent amount
of complexity.
The table below shows what CPU class name to use in place of a given
alias.
+==========+========================================================+
| Alias | CPU class |
+==========+========================================================+
| timing | TimingSimpleCPU |
| atomic | AtomicSimpleCPU |
| minor | MinorCPU |
| detailed | DrivO3CPU |
| kvm | ArmKvmCPU, ArmV8KvmCPU or X86KvmCPU, depending on arch |
| trace | TraceCPU |
+==========+========================================================+
Change-Id: I251c4f64b7869c6b64dd25b36967ae240f01ef08
Reviewed-on: https://gem5-review.googlesource.com/2940
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Names of DRAM configurations were updated to reflect both
the channel and device data width.
Previous naming format was:
<DEVICE_TYPE>_<DATA_RATE>_<CHANNEL_WIDTH>
The following nomenclature is now used:
<DEVICE_TYPE>_<DATA_RATE>_<n>x<w>
where n = The number of devices per rank on the channel
x = Device width
Total channel width can be calculated by n*w
Example:
A 64-bit DDR4, 2400 channel consisting of 4-bit devices:
n = 16
w = 4
The resulting configuration name is:
DDR4_2400_16x4
Updated scripts to match new naming convention.
Added unique configurations for DDR4 for:
1) 16x4
2) 8x8
3) 4x16
Change-Id: Ibd7f763b7248835c624309143cb9fc29d56a69d1
Reviewed-by: Radhika Jagtap <radhika.jagtap@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
This patch adds the ability for an application to request dist-gem5 to begin/
end synchronization using an m5 op. When toggling on sync, all nodes agree
on the next sync point based on the maximum of all nodes' ticks. CPUs are
suspended until the sync point to avoid sending network messages until sync has
been enabled. Toggling off sync acts like a global execution barrier, where
all CPUs are disabled until every node reaches the toggle off point. This
avoids tricky situations such as one node hitting a toggle off followed by a
toggle on before the other nodes hit the first toggle off.
This patch breaks out the most basic configuration options into a set
of base options, to allow them to be used also by scripts that do not
involve any ISA, and thus no actual CPUs or devices.
The patch also fixes a few modules so that they can be imported in a
NULL build, and avoid dragging in FSConfig every time Options is
imported.
This patch adds changes to the configuration scripts to support elastic
tracing and replay.
The patch adds a command line option to enable elastic tracing in SE mode
and FS mode. When enabled the Elastic Trace cpu probe is attached to O3CPU
and a few O3 CPU parameters are tuned. The Elastic Trace probe writes out
both instruction fetch and data dependency traces. The patch also enables
configuring the TraceCPU to replay traces using the SE and FS script.
The replay run is designed to resume from checkpoint using atomic cpu to
restore state keeping it consistent with FS run flow. It then switches to
TraceCPU to replay the input traces.
Add support for automatically discover available platforms. The
Python-side uses functionality similar to what we use when
auto-detecting available CPU models. The machine IDs have been updated
to match the platform configurations. If there isn't a matching
machine ID, the configuration scripts default to -1 which Linux uses
for device tree only platforms.
Transaction Level Modeling (TLM2.0) is widely used in industry for creating
virtual platforms (IEEE 1666 SystemC). This patch contains a standard compliant
implementation of an external gem5 port, that enables the usage of gem5 as a
TLM initiator component in SystemC based virtual platforms. Both TLM coding
paradigms loosely timed (b_transport) and aproximately timed (nb_transport) are
supported.
Compared to the original patch a TLM memory manager was added. Furthermore, the
transaction object was removed and for each TLM payload a PacketPointer that
points to the original gem5 packet is added as an TLM extension. For event
handling single events are now created.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
This patch adds an example configuration in ext/sst/tests/ that allows
an SST/gem5 instance to simulate a 4-core AArch64 system with SST's
memHierarchy components providing all the caches and memories.
When using gem5 as a slave simulator, it will not advance the
clock on its own and depends on the master simulator calling
simulate(). This new option lets us use the Python scripts
to do all the configuration while stopping short of actually
simulating anything.
This patch enables users to speficy --os-type on the command
line. This option is used to take specific actions for an OS type,
such as changing the kernel command line. This patch is part of the
Android KitKat enablement.
This patch gives the user direct influence over the number of DRAM
ranks to make it easier to tune the memory density without affecting
the bandwidth (previously the only means of scaling the device count
was through the number of channels).
The patch also adds some basic sanity checks to ensure that the number
of ranks is a power of two (since we rely on bit slices in the address
decoding).
This patch adds the --memchecker option, to denote that a MemChecker
should be instantiated for the system. The exact usage of the MemChecker
depends on the system configuration.
For now CacheConfig.py makes use of the option, adding MemCheckerMonitor
instances between CPUs and D-Caches.
Note, however, that currently this only provides limited checking on a
running system; other parts of the system, such as I/O devices are not
monitored, and may cause warnings to be issued by the monitor.
More documentation at http://gem5.org/Simpoints
Steps to profile, generate, and use SimPoints with gem5:
1. To profile workload and generate SimPoint BBV file, use the
following option:
--simpoint-profile --simpoint-interval <interval length>
Requires single Atomic CPU and fastmem.
<interval length> is in number of instructions.
2. Generate SimPoint analysis using SimPoint 3.2 from UCSD.
(SimPoint 3.2 not included with this flow.)
3. To take gem5 checkpoints based on SimPoint analysis, use the
following option:
--take-simpoint-checkpoint=<simpoint file path>,<weight file
path>,<interval length>,<warmup length>
<simpoint file> and <weight file> is generated by SimPoint analysis
tool from UCSD. SimPoint 3.2 format expected. <interval length> and
<warmup length> are in number of instructions.
4. To resume from gem5 SimPoint checkpoints, use the following option:
--restore-simpoint-checkpoint -r <N> --checkpoint-dir <simpoint
checkpoint path>
<N> is (SimPoint index + 1). E.g., "-r 1" will resume from SimPoint
#0.
Both options accept template which will, through python string formatting,
have "mem", "disk", and "script" values substituted in from the mdesc.
Additional values can be used on a case by case basis by passing them as
keyword arguments to the fillInCmdLine function. That makes it possible to
have specialized parameters for a particular ISA, for instance.
The first option lets you specify the template directly, and the other lets
you specify a file which has the template in it.
This changes the default ARM system to a Versatile Express-like system that supports
2GB of memory and PCI devices and updates the default kernels/file-systems for
AArch64 ARM systems (64-bit) to support up to 32GB of memory and PCI devices. Some
platforms that are no longer supported have been pruned from the configuration files.
In addition a set of 64-bit ARM regressions have been added to the regression system.
Adds the parameter --num-work-ids to Options.py and reads the parameter
into the System params in Simulation.py. This parameter enables setting
the number of possible work items to different than 16. Support for this
parameter already exists in src/sim/System.py, so this changeset only
affects the Python config files.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
Make the default memory type DDR3-1600 x64, and use the open-adaptive
page policy. This change is aiming to ensure that users by default are
using a realistic memory system.
Note: AArch64 and AArch32 interworking is not supported. If you use an AArch64
kernel you are restricted to AArch64 user-mode binaries. This will be addressed
in a later patch.
Note: Virtualization is only supported in AArch32 mode. This will also be fixed
in a later patch.
Contributors:
Giacomo Gabrielli (TrustZone, LPAE, system-level AArch64, AArch64 NEON, validation)
Thomas Grocutt (AArch32 Virtualization, AArch64 FP, validation)
Mbou Eyole (AArch64 NEON, validation)
Ali Saidi (AArch64 Linux support, code integration, validation)
Edmund Grimley-Evans (AArch64 FP)
William Wang (AArch64 Linux support)
Rene De Jong (AArch64 Linux support, performance opt.)
Matt Horsnell (AArch64 MP, validation)
Matt Evans (device models, code integration, validation)
Chris Adeniyi-Jones (AArch64 syscall-emulation)
Prakash Ramrakhyani (validation)
Dam Sunwoo (validation)
Chander Sudanthi (validation)
Stephan Diestelhorst (validation)
Andreas Hansson (code integration, performance opt.)
Eric Van Hensbergen (performance opt.)
Gabe Black
This Python script generates an ARM DS-5 Streamline .apc project based
on gem5 run. To successfully convert, the gem5 runs needs to be run
with the context-switch-based stats dump option enabled (The guest
kernel also needs to be patched to allow gem5 interrogate its task
information.) See help for more information.
