This changeset allows setting a variable for interleaving.
That value is used together with the number of directories to
calculate numa_high_bit, which is in turn used to set up
cache, directory, and memory controller interleaving.
A similar approach is used to set xor_low_bit, and calculate
xor_high_bit for address hashing.
Change-Id: Ia342c77c59ca2e3438db218b5c399c3373618320
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28134
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch properly sets the access permissions in all controllers.
'Busy' was used for all transient states, which is incorrect in lots of
cases when we still hold a valid copy of the line and are able to handle
a functional read.
In the L2 controller these states were split to differentiate the access
permissions:
IFGXX -> IFGXX, IFGXXD
IGMO -> IGMO, IGMOU
IGMIOF -> IGMIOF, IGMIOFD
Same for the dir. controller:
IS -> IS, IS_M
MM -> MM, MM_M
The dir. controllers also has the states WBI/WBS for lines that have
been queued for a writeback. In these states we hold the data in the TBE
for replying to functional reads until the memory acks the write and we
move to I or S.
Other minor changes includes updated debug messages and asserts.
Change-Id: Ie4f6eac3b4d2641ec91ac6b168a0a017f61c0d6f
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/21927
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Pouya Fotouhi <pfotouhi@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Calls to queueMemoryRead and queueMemoryWrite do not consider the size
of the queue between ruby directories and DRAMCtrl which causes infinite
buffering in the queued port between the two. This adds a MessageBuffer
in between which uses enqueues in SLICC and is therefore size checked
before any SLICC transaction pushing to the buffer can occur, removing
the infinite buffering between the two.
Change-Id: Iedb9070844e4f6c8532a9c914d126105ec98d0bc
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/27427
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
Add support in Ruby to use all replacement policies in Classic.
Furthermore, if new replacement policies are added to the
Classic system, the Ruby system will recognize new policies
without any other changes in Ruby system. The following list
all the major changes:
* Make Ruby cache entries (AbstractCacheEntry) inherit from
Classic cache entries (ReplaceableEntry). By doing this,
replacement policies can use cache entries from Ruby caches.
AccessPermission and print function are moved from
AbstractEntry to AbstractCacheEntry, so AbstractEntry is no
longer needed.
* DirectoryMemory and all SLICC files are changed to use
AbstractCacheEntry as their cache entry interface. So do the
python files in mem/slicc/ast which check the entry
interface.
* "main='false'" argument is added to the protocol files where
the DirectoryEntry is defined. This change helps
differentiate DirectoryEntry from CacheEntry because they are
both the instances of AbstractCacheEntry now.
* Use BaseReplacementPolicy in Ruby caches instead of
AbstractReplacementPolicy so that Ruby caches will recognize
the replacement policies from Classic.
* Add getLastAccess() and useOccupancy() function to Classic
system so that Ruby caches can use them. Move lastTouchTick
to ReplacementData struct because it's needed by
getLastAccess() to return the correct value.
* Add a 2-dimensional array of ReplacementData in Ruby caches
to store information for different replacement policies. Note
that, unlike Classic caches, where policy information is
stored in cache entries, the policy information needs to be
stored in a new 2-dimensional array. This is due to Ruby
caches deleting the cache entry every time the corresponding
cache line get evicted.
Change-Id: Idff6fdd2102a552c103e9d5f31f779aae052943f
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/20879
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Adding an option to enable DRAM low-power states. The low power
states can have a significant impact on application performance
(sim_ticks) on the order of 2-3x, especially for compute-gpu apps.
The options allows for it to easily be enabled/disabled to compare
performance numbers. The option is disabled by default.
Change-Id: Ib9bddbb792a1a6a4afb5339003472ff8f00a5859
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18548
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch updates the FileSystemConfig so it works with more kinds of
config scripts (e.g., the Learning gem5 scripts).
There are 4 main changes:
- Added system as a parameter to the config_filesystem function so the
function can search the system for the number of CPUs instead of relying
on options from Options.py
- Instead of calling redirect_paths everywhere config_filesystem is
used, now it is implicitly called.
- Cleaned up the Ruby scripts a bit to remove redundant calls to
config_filesystem
- Added a config_filesystem call to the Ruby Learning gem5 script
(currently the only Learning gem5 script that requires it).
In the future, I think it would be better to move the config_filesystem
call into simulate.py, probably into the instantiate function. I tried to
use the per-CPU configuration parameters instead of options from
Options.py, but that's not possible until after the SimObject params
have been finalized in instantiate.
Change-Id: Ie6501a7435cfb3ac9d2b45be3722388b34063b1e
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18848
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Tested-by: kokoro <noreply+kokoro@google.com>
Removed the icache/dcache hit latency parameters from the Sequencer.
They were replaced by the mandatory queue enqueue latency that is now
defined by the top-level cache controller. By default, the latency is
defined by the mandatory_queue_latency parameter. When the latency
depends on specific protocol states or on the request type, the protocol
may override the mandatoryQueueLatency function.
Change-Id: I72e57a7ea49501ef81dc7f591bef14134274647c
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18413
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
L1 controller selects the L2 to message based on the assigned address
ranges instead of explicitly interleaving bits in the L1 controller. This
simplifies the L1 controller implementation a bit and allows for more
flexibility when changing the address->controller mapping.
Change-Id: Ie67999bb977566939432a5045f65dbd2da81816a
Signed-off-by: Tiago Muck <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/18410
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Python 2.7 used to return lists for operations such as map and range,
this has changed in Python 3. To make the configs Python 3 compliant,
add explicit conversions from iterators to lists where needed, replace
xrange with range, and fix changes to exec syntax.
This change doesn't fix import paths since that might require us to
restructure the configs slightly.
Change-Id: Idcea8482b286779fc98b4e144ca8f54069c08024
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16002
Reviewed-by: Gabe Black <gabeblack@google.com>
In Ruby, for every directory we create one memory controller for every
range in the memory ranges. Previously the memory controllers and the
directories created their address ranges independently and as a result
a mismatch was possible. In fact, we assinged an interleaved address
range with hasing for the memory controllers while the corresponding
directories would be assigned the same interleaved address range
without hashing.
This change uses the address range of the memory controllers to
populate the list of address ranges for the corresponding directory
and avoid bugs due to code duplication.
Change-Id: I1e321c81a254199e5aaa9f3b81f4a4642c60a67a
Reviewed-on: https://gem5-review.googlesource.com/12318
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Prior to this changeset the bootloader rom (instantiated as a
SimpleMemory) in ruby Arm systems was treated as an IO device and it
was fronted by a DMA controller. This changeset moves the bootloader
rom and adds it to the system as another memory with a dedicated
directory controller.
Change-Id: I094fed031cdef7f77a939d94f948d967b349b7e0
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
ARM systems require local exclusive monitors for the implementation of
synchronization primitives between processors. A ruby memory system
needs to forward invalidations to the local exclusive monitors to
to correctly determine their state.
Change-Id: I7bc4d0f2a5be0f4e36a25c87aa4a81a3f086fb3c
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2904
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Previously the directory covered a flat address range that always
started from address 0. This change adds a vector of address ranges
with interleaving and hashing that each directory keeps track of and
the necessary flexibility to support systems with non continuous
memory ranges.
Change-Id: I6ea1c629bdf4c5137b7d9c89dbaf6c826adfd977
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2903
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Continue along the same line as the recent patch that made the
Ruby-related config scripts Python packages and make also the
configs/common directory a package.
All affected config scripts are updated (hopefully).
Note that this change makes it apparent that the current organisation
and naming of the config directory and its subdirectories is rather
chaotic. We mix scripts that are directly invoked with scripts that
merely contain convenience functions. While it is not addressed in
this patch we should follow up with a re-organisation of the
config structure, and renaming of some of the packages.
This patch moves the addition of network options into the Ruby module
to avoid the regressions all having to add it explicitly. Doing this
exposes an issue in our current config system though, namely the fact
that addtoPath is relative to the Python script being executed. Since
both example and regression scripts use the Ruby module we would end
up with two different (relative) paths being added. Instead we take a
first step at turning the config modules into Python packages, simply
by adding a __init__.py in the configs/ruby, configs/topologies and
configs/network subdirectories.
As a result, we can now add the top-level configs directory to the
Python search path, and then use the package names in the various
modules. The example scripts are also updated, and the messy
path-deducing variations in the scripts are unified.
Over the past 6 years, we realized that the protocol is essentially used
to run the garnet network in a standalone manner, and feed standard synthetic
traffic patterns through it.
Add support for using KVM to accelerate APU simulations. The intended use
case is to fast-forward through runtime initialization until the first
kernel launch.
There are cases where we want to put boot ROMs on the PIO bus. Ruby
currently doesn't support functional accesses to such memories since
functional accesses are always assumed to go to physical memory. Add
the required support for routing functional accesses to the PIO bus.
Change-Id: Ia5b0fcbe87b9642bfd6ff98a55f71909d1a804e3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brad Beckmann <brad.beckmann@amd.com>
Reviewed-by: Michael LeBeane <michael.lebeane@amd.com>
This patch allows the ruby random tester to use ruby ports that may only
support instr or data requests. This patch is similar to a previous changeset
(8932:1b2c17565ac8) that was unfortunately broken by subsequent changesets.
This current patch implements the support in a more straight-forward way.
Since retries are now tested when running the ruby random tester, this patch
splits up the retry and drain check behavior so that RubyPort children, such
as the GPUCoalescer, can perform those operations correctly without having to
duplicate code. Finally, the patch also includes better DPRINTFs for
debugging the tester.
We no longer use the C library based random number generator: random().
Instead we use the C++ library provided rng. So setting the random seed for
the RubySystem class has no effect. Hence the variable and the corresponding
option are being dropped.
This patch serves to avoid name clashes with the classic cache. For
some reason having two 'SimObject' files with the same name creates
problems.
--HG--
rename : src/mem/ruby/structures/Cache.py => src/mem/ruby/structures/RubyCache.py
We no longer use the C library based random number generator: random().
Instead we use the C++ library provided rng. So setting the random seed for
the RubySystem class has no effect. Hence the variable and the corresponding
option are being dropped.
