Replace instances of "GCN3" with Vega. Remove gfx801 and gfx803. Rename
FIJI to Vega and Carrizo to Raven.
Using misc since there is not enough room to fit all the tags.
Change-Id: Ibafc939d49a69be9068107a906e878408c7a5891
This is matching what we are already doing in the starter_fs.py script
Change-Id: I50239050be9bd151a607ec892f8dd9322b24040b
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
The RFC is defaulted to a size of 0 which removes it completely. To use
the RFC set the --register-file-cache-size to a non-zero multiple of
two. In addition, rfc_pipe_length may be altered to increase or decrease
RFC latency benefit.
The RFC is defaulted to a size of 0 which removes it completely. To use
the RFC set the --register-file-cache-size to a non-zero multiple of
two. In addition, rfc_pipe_length may be altrered to increase or
decrease RFC latency benefit.
Change-Id: I6f5bf5b750eb64155fbc8c8343e9feadce5c9f79
The args.cpu_type is not a type but a string so the isinstance checking
will always fail and an assertion will always be thrown
A cherry-pick of #684 to develop
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Co-authored-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
After removing `get_runtime_isa`, the `send_evicts` function in the ruby
configs assumes that there is an ISA built. This change short-circuits
that logic if the current build is the NULL (none) ISA.
Change-Id: I75fefe3d70649b636b983c4d2145c63a9e1342f7
Signed-off-by: Jason Lowe-Power <jason@lowepower.com>
configs/ruby/Ruby.py fails when `DerivO3CPU` is not compiled into the
gem5 binary. The `isinstance` check fails. This fix addds a guard.
Change-Id: I1e5503ab18ec94683056c6eb28cebeda6632ae8e
1. Fix the wrong ISA detect of get_isa function
2. Fix the typo ObjectLIst.cpu_list
3. Fix missing PageTableWalkerCache
4. Fix the invalid default cpu_type paramter
Change-Id: I217ea8da8a6d8e712743a5b32c4c0669216ce6c4
`get_runtime_isa()` has been deprecated for some time. It is a leftover
piece of code from when gem5 was compiled to a single ISA and that ISA
used to configure the simulated system to use that ISA. Since multi-ISA
compilations are possible, `get_runtime_isa()` should not be used.
Unless the gem5 binary is compiled to a single ISA, a failure will
occur.
The new proceedure for specify which ISA to use is by the setting of the
correct `BaseCPU` implementation. E.g., `X86SimpleTimingCPU` of
`ArmO3CPU`.
This patch removes the remaining `get_runtime_isa()` instances and
removes the function itself. The `SimpleCore` class has been updated to
allow for it's CPU factory to return a class, needed by scripts in
"configs/common".
The deprecated functionality in the standard library, which allowed for
the specifying of an ISA when setting up a processor and/or core has
also been removed. Setting an ISA is now manditory.
Fixes#216.
- updated the x86-npb-benchmarks.py to use npb workloads and suites.
The suites and workloads are not in the database are also waiting
feedback. I am attaching the JSON file here.
[npb_workloads_suite.json](https://github.com/gem5/gem5/files/13431116/npb_workloads_suite.json)
To run the x86-npb-benchmarks.py script use the
GEM5_RESOURCE_JSON_APPEND env variable. The full command is:
```
GEM5_RESOURCE_JSON_APPEND=[path to npb_workloads_suite.json] ./build/X86/gem5.opt configs/example/gem5_library/x86-npb-benchmarks.py --benchmark [benchmark]
```
Change-Id: I248e6452ea4122e9260e34e4368847660edae577
This patch adds supports for using the "classic" prefetchers with ruby
cache controllers.
This pull request includes a few commits making the changes in this
order:
- Refactor decouples the classic cache and prefetchers interfaces
- Extras probes for later integration with ruby
- General ruby-side support
- Adds support for the CHI protocol
Commit [mem-ruby: support prefetcher in CHI
protocol](2bdb65653b)
may be used as example on how to add support for other protocols.
JIRA issues that may be related to this pull request:
https://gem5.atlassian.net/browse/GEM5-457https://gem5.atlassian.net/browse/GEM5-1112
Remove the prefetch_on_access and prefetch_on_pf_hit from BaseCache.
BasePrefetch no longer expects this params to exist in the parent.
Configurations that set these parameter using the cache object were
fixed.
Change-Id: I9ab6a545eaf930ee41ebda74e2b6b8bad0ca35a7
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Recent breaking changes in the DRAMSys API require user code to be
updated. These updates have been applied to the gem5 integration.
Furthermore, as DRAMSys started to use CMake dependency management,
it is no longer sensible to maintain two separate build systems for
DRAMSys. The use of the DRAMSys integration in gem5 will therefore
from now on require that CMake is installed on the target machine.
Additionally, support for snapshots have been implemented into DRAMSys
and coupled with gem5's checkpointing API.
Added a resource constraint, AtomicALUOperation, to GLC atomics
performed in the TCC.
The resource constraint uses a new class, ALUFreeList array. The class
assumes the following:
- There are a fixed number of atomic ALU pipelines
- While a new cache line can be processed in each pipeline each cycle,
if a cache line is currently going through a pipeline, it can't be
processed again until it's finished
Two configuration parameters have been used to tune this behavior:
- tcc-num-atomic-alus corresponds to the number of atomic ALU pipelines
- atomic-alu-latency corresponds to the latency of atomic ALU pipelines
Change-Id: I25bdde7dafc3877590bb6536efdf57b8c540a939
This change updates the gem5 SST bridge to call m5.instantiate()
in the gem5 config script instead of in the SST component. This
allows more flexibility for the gem5-SST setup, as we can now write
traffic generators using the bridge.
Change-Id: I510a8c15f8fb00bdbdd60dafa2d9f5ad011e48f2
Signed-off-by: Kaustav Goswami <kggoswami@ucdavis.edu>
The return address stack (RAS) is restructured to be a separate SimObject.
This enables disabling the RAS and better separation of the functionality.
Furthermore, easier statistics and debugging.
Change-Id: I8aacf7d4c8e308165d0e7e15bc5a5d0df77f8192
Signed-off-by: David Schall <david.schall@ed.ac.uk>
PR #367 adds an option to configs/ruby/GPU_VIPER.py that was not added
to the corresponding dGPU equal for GPUFS and thus all GPUFS runs are
failing. Fixed in this patch.
Added checks to ensure that atomics are not performed in the TCC when it
is configured as a write-through cache. Also added SLC bit overwrite to
ensure directory preforms atomics when there is a write-through TCC.
Change-Id: I4514e6c8022aeb7785f2c59871cd9acec8161ed8
Add a --no-kvm-perf option to disable KVM perf counters for GPUFS
scripts. This is useful for users who have KVM enabled but configured
with more restrictive settings, which seems to be the default in newer
Linux distros.
Change-Id: I7508113d0f7c74deb21ea7b2770522885a0ec822
This change updates the gem5 SST Bridge to use SST 13.0.0. Changes are
made to replace SimpleMem class to StandardMem class as SimpleMem will
be deprecated in SST 14 and above. In addition, the translator.hh is
updated to translate more types of gem5 packets. A new parameter `ports`
was added on SST's side when invoking the gem5 component which does not
require recompiling the gem5 component whenever a new outgoing bridge is
added in a gem5 config.
This change updates the gem5 SST Bridge to use SST 13.0.0. Changes
are made to replace SimpleMem class to StandardMem class as
SimpleMem will be deprecated in SST 14 and above. In addition, the
translator.hh is updated to translate more types of gem5 packets.
A new parameter `ports` was added on SST's side when invoking the
gem5 component which does not require recompiling the gem5
component whenever a new outgoing bridge is added in a gem5 config.
Change-Id: I45f0013bc35d088df0aa5a71951422cabab4d7f7
Signed-off-by: Kaustav Goswami <kggoswami@ucdavis.edu>
Earlier, GPU checkpointing was working only if a checkpoint was created
before the first kernel execution. This pull request adds support to
checkpoint in-between any two kernel calls. It does so by doing the
following.
- Adds flush support in the GPU_VIPER protocol
- Adds flush support in the GPUCoalescer
- Updates cache recorder to use the GPUCoalescer during simulation
cooldown and cache warmup times.
This `mkdir` is problematic as it doesn't create the directory
recursively. This casues errors if `dir` is `X/Y/Z` and both `Y` and `Z`
has not been created. An error will be returned (`No such file or
directory`).
This issue was fixed with: https://github.com/gem5/gem5/pull/263. The
checkpointing code already recursively creates directories as needed.
Ergo was can remove this `mkdir` statement.
Current [TraceCPU
documentation](https://www.gem5.org/documentation/general_docs/cpu_models/TraceCPU)
still references the deprecated **se.py/fs.py** scripts for elastic
trace generation (script paths are also outdated).
With this PR we provide a simpler Arm based elastic trace generation
script that can
be used out of the box by a user or that can be extended as needed.
This `mkdir` is problematic as it doesn't create the directory
recursively. This casues errors if `dir` is `X/Y/Z` and both `Y` and `Z`
has not been created. An error will be returned (`No such file or
directory`).
This issue was fixed with: https://github.com/gem5/gem5/pull/263. The
checkpointing code already recursively creates directories as needed.
Ergo was can remove this `mkdir` statement.
Change-Id: Ibae38267c8ee1eba76d7834367aa1c54013365bc
The new script will automatically use the newly
defined O3_ARM_v7a_3_Etrace CPU to run a simple SE simulation while
generating elastic trace files.
The script is based on starter_se.py, but contains the following
limitations:
1) No L2 cache as it might affect computational delay calculations
2) Supporting SimpleMemory only with minimal memory latency
There restrictions were imported by the existing elastic trace
generation logic in the common library (collected by grepping
elastic_trace_en) [1][2][3]
Example usage:
build/ARM/gem5.opt configs/example/arm/etrace_se.py \
--inst-trace-file [INSTRUCTION TRACE] \
--data-trace-file [DATA TRACE] \
[WORKLOAD]
[1]: https://github.com/gem5/gem5/blob/stable/\
configs/common/MemConfig.py#L191
[2]: https://github.com/gem5/gem5/blob/stable/\
configs/common/MemConfig.py#L232
[3]: https://github.com/gem5/gem5/blob/stable/\
configs/common/CacheConfig.py#L130
Change-Id: I021fc84fa101113c5c2f0737d50a930bb4750f76
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
According to the original paper [1] the elastic trace generation process
requires a cpu with a big number of entries in the ROB, LQ and SQ, so
that there are no stalls due to resource limitation.
At the moment these numbers are copy pasted from the
CpuConfig.config_etrace method [2].
[1]: https://ieeexplore.ieee.org/document/7818336
[2]: https://github.com/gem5/gem5/blob/stable/\
configs/common/CpuConfig.py#L40
Change-Id: I00fde49e5420e420a4eddb7b49de4b74360348c9
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
We define a new parent (ClusterSystem) to model a system
with one or more cpu clusters within it.
The idea is to make this new base class reusable by SE
systems/scripts as well (like starter_se.py)
Change-Id: I1398d773813db565f6ad5ce62cb4c022cb12a55a
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-by: Richard Cooper <richard.cooper@arm.com>
- A new abstract BTB class is created to enable different BTB
implementations. The new BTB class gets its own parameter
and stats.
- An enum is added to differentiate branch instruction types.
This enum is used to enhance statistics and BPU management.
- The existing BTB is moved into `simple_btb` as default.
- An additional function is added to store the static instruction in
the BTB. This function is used for the decoupled front-end.
- Update configs to match new BTB parameters.
Change-Id: I99b29a19a1b57e59ea2b188ed7d62a8b79426529
Signed-off-by: David Schall <david.schall@ed.ac.uk>
Added a new feature to CHI protocol (in collaboration with @tiagormk).
Here is the Jira Ticket
[https://gem5.atlassian.net/browse/GEM5-1326](https://gem5.atlassian.net/browse/GEM5-1326
). As described in CHI specs, far atomic transactions enable remote
execution of Atomic Memory Operations. This pull request incorporates
several changes:
* Fix Arm ISA definition of Swap instructions. These instructions should
return an operand, so their ISA definition should be Return Operation.
* Enable AMOs in Ruby Mem Test to verify that AMOs work
* Enable near and far AMO in the Cache Controler of CHI
Three configuration parameters have been used to tune this behavior:
* policy_type: sets the atomic policy to one of the described in [our
paper](https://dl.acm.org/doi/10.1145/3579371.3589065)
* atomic_op_latency: simulates the AMO ALU operation latency
* comp_anr: configures the Atomic No return transaction to split
CompDBIDResp into two different messages DBIDResp and Comp
Previously, the L1, L2 number of banks and L2 latencies were not
configurable through command line arguments. This commit adds support to
configure them through the arguments '--tcp-num-banks' for number of
banks in L1, '--tcc-num-banks' for number of banks in L2, and
'--tcc-tag-access-latency', and '--tcc-data-access-latency'
Change-Id: Ie3b713ead16865fd7120e2d809ebfa56b69bc4a1
Introduce far atomic operations in CHI protocol.
Three configuration parameters have been used to tune this behavior:
policy_type: sets the atomic policy to one of the described in our paper
atomic_op_latency: simulates the AMO ALU operation latency
comp_anr: configures the Atomic No return transaction to split
CompDBIDResp into two different messages DBIDResp and Comp
Change-Id: I087afad9ad9fcb9df42d72893c9e32ad5a5eb478
GPUFS+KVM simulations automatically enable AVX. This commit adds a
command line option to disable AVX if its not needed for a GPUFS
simulation.
Change-Id: Ic22592767dbdca86f3718eca9c837a8e29b6b781
