Apply the gem5 namespace to the codebase.
Some anonymous namespaces could theoretically be removed,
but since this change's main goal was to keep conflicts
at a minimum, it was decided not to modify much the
general shape of the files.
A few missing comments of the form "// namespace X" that
occurred before the newly added "} // namespace gem5"
have been added for consistency.
std out should not be included in the gem5 namespace, so
they weren't.
ProtoMessage has not been included in the gem5 namespace,
since I'm not familiar with how proto works.
Regarding the SystemC files, although they belong to gem5,
they actually perform integration between gem5 and SystemC;
therefore, it deserved its own separate namespace.
Files that are automatically generated have been included
in the gem5 namespace.
The .isa files currently are limited to a single namespace.
This limitation should be later removed to make it easier
to accomodate a better API.
Regarding the files in util, gem5:: was prepended where
suitable. Notice that this patch was tested as much as
possible given that most of these were already not
previously compiling.
Change-Id: Ia53d404ec79c46edaa98f654e23bc3b0e179fe2d
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/46323
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Tested-by: kokoro <noreply+kokoro@google.com>
As part of recent decisions regarding namespace
naming conventions, all namespaces will be changed
to snake case.
sim_clock::Int became sim_clock::as_int.
"as_int" was chosen because "int" is a reserved
keyword, and this namespace acts as a selector of
how to read the internal variables.
Another possibility to resolve this would be to
remove the namespaces "Float" and "Int" and use
unions instead.
Change-Id: I65f47608d2212424bed1731c7f53d242d5a7d89a
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/45436
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Hoa Nguyen <hoanguyen@ucdavis.edu>
Maintainer: Gabe Black <gabe.black@gmail.com>
The create() method on Params structs usually instantiate SimObjects
using a constructor which takes the Params struct as a parameter
somehow. There has been a lot of needless variation in how that was
done, making it annoying to pass Params down to base classes. Some of
the different forms were:
const Params &
Params &
Params *
const Params *
Params const*
This change goes through and fixes up every constructor and every
create() method to use the const Params & form. We use a reference
because the Params struct should never be null. We use const because
neither the create method nor the consuming object should modify the
record of the parameters as they came in from the config. That would
make consuming them not idempotent, and make it impossible to tell what
the actual simulation configuration was since it would change from any
user visible form (config script, config.ini, dot pdf output).
Change-Id: I77453cba52fdcfd5f4eec92dfb0bddb5a9945f31
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/35938
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Made DRAMCtrl a ClockedObject, with DRAMInterface
defined as an AbstractMemory. The address
ranges are now defined per interface. Currently
the model only includes a DRAMInterface but this
can be expanded for other media types.
The controller object includes a parameter to the
interface, which is setup when gem5 is configured.
Change-Id: I6a368b845d574a713c7196c5671188ca8c1dc5e8
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/28968
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The data rate is used by the drampower lib to estimate the power
consumption of the DRAM Core. Previously, we used the formula:
burst_cycles = divCeil(p->tBURST_MAX, p->tCK);
data_rate = p->burst_length / burst_cycles;
to derive the data_rate. However, under certain configurations this
formula computes the wrong result due to rounding errors. This patch
simplifies the way we derive the data_rate by passing the value of the
DRAM parameter beats_per_clock.
Change-Id: Ic8cd35bb4641d9c0a704675d2672a6fe4f4ec13e
Signed-off-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Wendy Elsasser <wendy.elsasser@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30056
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
This change includes:
1) Verify available command bandwidth
2) Add support for multi-cycle commands
3) Add new timing parameters
4) Add ability to interleave bursts
5) Add LPDDR5 configurations
The DRAM controller historically does not verify contention on the
command bus and if there is adaquate command bandwidth to issue a
new command. As memory technologies evolve, multiple cycles are becoming
a requirement for some commands. Depending on the burst length, this
can stress the command bandwidth. A check was added to verify command
issue does not exceed a maximum value within a defined window. The
default window is a burst, with the maximum value defined based on the
burst length and media clocking characteristics. When the command bandwidth
is exceeded, commands will be shifted to subsequent burst windows.
Added support for multi-cycle commands, specifically Activate, which
requires a larger address width as capacities grow. Additionally,
added support for multi-cycle Read / Write bursts for low power
DRAM cases in which additional CLK synchronization may be required
to run at higher speeds.
To support emerging memories, added the following new timing parameters.
1) tPPD -- Precharge-to-Precharge delay
2) tAAD -- Max delay between Activate-1 and Activate-2 commands
I/O data rates are continuing to increase for DRAM but the core frequency
is still fairly stagnant for many technologies. As we increase the burst
length, either the core prefetch needs to increase (for a seamless burst)
or the burst will be transferred with gaps on the data bus. To support
the latter case, added the ability to interleave 2 bursts across bank
groups.
Using the changes above, added an initial set of LPDDR5 configurations.
Change-Id: I1b14fed221350e6e403f7cbf089fe6c7f033c181
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26236
Reviewed-by: Matthew Poremba <matthew.poremba@amd.com>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: Gem5 Cloud Project GCB service account <345032938727@cloudbuild.gserviceaccount.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch adds a first cut GDDR5 config to accommodate the users
combining gem5 and GPUSim. The config is based on a SK Hynix
datasheet, and the Nvidia GTX580 specification. Someone from the
GPUSim user-camp should tweak the default page-policy and static
frontend and backend latencies.
This patch adds a class to wrap DRAMPower Library in gem5.
This class initiates an object of class MemorySpecification
of the DRAMPower Library, passes the parameters from DRAMCtrl.py
to this object and creates an object of drampower library using
the memory specification.
