In order to fix several regression failures [1] the master/slave
terminology in src/cpu/BaseCPU.py was reintroduced [2].
This patch is addressing the issue by providing 2 different
ways of connecting cpu ports:
*) connectBus: The method assumes an object with a bus interface is
passed as an argument, therefore it tries to bind cpu ports to the
bus.mem_side_ports and bus.cpu_side_ports
*) connectAllPorts: No assumption on the port owning device is made.
The method simply accepts ports as arguments which will be directly
connected to the peer cpu ports
This will be used for example by ruby Sequencers
[1]: https://gem5.atlassian.net/browse/GEM5-775
[2]: https://gem5-review.googlesource.com/c/public/gem5/+/34495
Change-Id: I715ab8471621d6e5eb36731d7eaefbedf9663a71
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/52584
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
The prior example config for FS fails SMP boot on the KVMX86CPU.
These updates incorporate logic x86-boot-tests/system/
[system.py|run_exit.py] as well as configs/example/arm/
fs_bigLITTLE.py to enable both single processor and SMP boot.
Each KVM VM now uses its own eventq and a non-zero sim_quantum.
Change-Id: I9c73a2f6f2ca604aecd31f45570423c58f85020f
Signed-off-by: Kevin Loughlin <kevlough@umich.edu>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/41602
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This patch updates Ruby configuration scripts to use the functions
defined in the RubySequencer python object to connect to cpu ports.
Only the protocol-agnostic scripts were updated. Scripts that assume
a specific protocol (e.g. configs/example/apu_se.py, gpu tests, etc)
and scripts in which the obj connected to the RubySequencer is not a
BaseCPU (e.g. the tests scripts) were not changed as they require a
non-standard port wireup.
Change-Id: I1e931ff0fc93f393cb36fbb8769ea4b48e1a1e86
Signed-off-by: Tiago Mück <tiago.muck@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/31418
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
fs.py warns when an Arm platform is being created without a DTB file,
if the platform does not support the automatic creation of a DTB.
Updated the list of supported platforms with recent additions in order
to remove incorrect and potentially confusing warnings.
Change-Id: I549124a1afbc36e313f614dccab17973582bc3f7
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/30575
Tested-by: kokoro <noreply+kokoro@google.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Information about what kernel to load and how to load it was built
into the System object and its subclasses. That overloaded the System
object and made it responsible for too many things, and also was
somewhat awkward when working with SE mode which doesn't have a kernel.
This change extracts the kernel and information related to it from the
System object and puts into into a OsKernel or Workload object.
Currently the idea of a "Workload" to run and a kernel are a bit
muddled, an unfortunate carry-over from the original code. It's also an
implication of trying not to make too sweeping of a change, and to
minimize the number of times configs need to change, ie avoiding
creating a "kernel" parameter which would shortly thereafter be
renamed to "workload".
In future changes, the ideas of a kernel and a workload will be
disentangled, and workloads will be expanded to include emulated
operating systems which shephard and contain Process-es for syscall
emulation.
This change was originally split into pieces to make reviewing it
easier. Those reviews are here:
https: //gem5-review.googlesource.com/c/public/gem5/+/22243
https: //gem5-review.googlesource.com/c/public/gem5/+/24144
https: //gem5-review.googlesource.com/c/public/gem5/+/24145
https: //gem5-review.googlesource.com/c/public/gem5/+/24146
https: //gem5-review.googlesource.com/c/public/gem5/+/24147
https: //gem5-review.googlesource.com/c/public/gem5/+/24286
Change-Id: Ia3d863db276a023b6a2c7ee7a656d8142ff75589
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/26466
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Gabe Black <gabeblack@google.com>
Tested-by: kokoro <noreply+kokoro@google.com>
All ISAs except SPARC can now take multiple disk images by passing
the --disk-image option multiple times.
Before this patch, several ISAs automatically mounted a secondary disk
called "linux-bigswap2.img", which had to be in M5_PATH even if the end
user did not want more than one disk. This was the case for for example
for X86 but not ARM.
This change was done to:
* allow ARM to have a second disk image in fs.py, which was not possible,
and allow other ISAs like X86 and ARM to take any number of disk images
* provide a simpler, more intuitive CLI interface that does not require
magic disk images to be present in M5_PATH to work for ISAs such as X86.
Linux does not need that secondary image to boot correctly, so it is
more friendly to support a minimal setup that requires the least amount
of binaries to boot, and let supply the second image manually only if
they need it.
* make fs.py --disk-image work more similarly across all ISAs
SPARC was left with a single disk only because its setup was a bit more
complex and would require further testing.
Change-Id: I8b6e08ae6daf0a5b6cd1d57d285a9677f01eb7ad
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/23671
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Tested-by: kokoro <noreply+kokoro@google.com>
It is *not* true that a kernel is required in FS mode. For example,
in SPARC, gem5 is set up to run actual system firmware which will load
a kernel from the disk image. Other systems can run in a bare metal
mode where they also have no kernel.
If a configuration requires a kernel, it should check for it in C++
where there context lives, not globally in fs.py.
Change-Id: Ib094c29474c248f866bd08d4f975648a2c707a19
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/24284
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
9p allows the guest Linux kernel to mount a host directory into the guest.
This allows to very easily modify test programs after a run at the end of
boot, without the need to re-insert the changes into a disk image.
It is enabled on both fs.py and fs_bigLITTLE.py with the --vio-9p
option.
Adapted from code originally present on the wiki: http://gem5.org/WA-gem5
As documented in the CLI option help, the current setup requires the guest
to know the full path to the host share, which is annoying, but overcoming
that would require actually parsing a bit of the protocol rather than just
forwarding everything to diod.
Change-Id: Iaeb1ed185dccfa8332fe6657a54e7550f64230eb
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/22831
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Kernel was being set using a placeholder and then assigned the
correct value. This would generate the following error if the
placeholder file did not exist:
'IOError: Can't find file <placeholder> on path'
This patch follows the same directions of commit
12eca7ac04 and removes the default
values, forcing the user to properly configure the kernel.
Change-Id: I0eb45d12eda6b6efe9a3fe118996b640844a7b34
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/11850
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Python 2.7 used to return lists for operations such as map and range,
this has changed in Python 3. To make the configs Python 3 compliant,
add explicit conversions from iterators to lists where needed, replace
xrange with range, and fix changes to exec syntax.
This change doesn't fix import paths since that might require us to
restructure the configs slightly.
Change-Id: Idcea8482b286779fc98b4e144ca8f54069c08024
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/16002
Reviewed-by: Gabe Black <gabeblack@google.com>
The AtomicSimpleCPU used to be able to access memory directly to speed
up simulation if no caches are used. This is fine as long as no
switching between CPU models is required. In order to switch to a new
CPU model that requires caches, we currently need to checkpoint the
system and restore it into a new configuration. The new
'atomic_noncaching' memory mode provides a solution that avoids this
issue since caches are bypassed in this mode. This changeset removes
the old fastmem option from the AtomicSimpleCPU and introduces a new
CPU, NonCachingSimpleCPU, which derives from the AtomicSimpleCPU.
The NonCachingSimpleCPU uses the same mechanism as the AtomicSimpleCPU
used to use when accessing memory in when fastmem was enabled.
This changeset also introduces a new switcheroo test that tests
switching between a NonCachingSimpleCPU and a TimingSimpleCPU with
caches.
Change-Id: If01893f9b37528b14f530c11ce6f53c097582c21
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12419
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Both se.py and fs.py need to check if a CPU is a KVM CPU. This is
somewhat involved since CPUs can be disabled at compile time. Enable
better code reuse by moving it to the CpuConfig module.
Change-Id: I47b1512ecb62e757399a407a0e41be83b9f83be3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/12418
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Prior to this changeset the bootloader rom (instantiated as a
SimpleMemory) in ruby Arm systems was treated as an IO device and it
was fronted by a DMA controller. This changeset moves the bootloader
rom and adds it to the system as another memory with a dedicated
directory controller.
Change-Id: I094fed031cdef7f77a939d94f948d967b349b7e0
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/8741
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
We have not added the --generate-dtb option for non-ARM systems and
hence this case becomes dead code. It also leads to error on non-ARM
systems as is tries to access a non existent field.
Change-Id: Ia926bd0c61efa275bc5e3864b8a9c3ffb7aa3cb5
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/7801
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Equips the fs.py config routine with an extra commandline option
--generate-dtb that will generate a dtb file automatically before
running the simulation. Only works with ARM systems and gives a warning
if the simulated system is not of --machine-type VExpress_GEM5_V1.
Change-Id: I7766e5459fd9bec2245de83cef103091ebaf7229
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/5968
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Ruby has no support for atomic_noncaching accesses, which prevents using
it with kvm-cpu. This patch fixes this by directly forwarding atomic
requests from the ruby port/sequencer to the corresponding directory
based on the destination address of the packet.
Change-Id: I0b4928bfda44fd9e5e48583c51d1ea422800da2d
Reviewed-on: https://gem5-review.googlesource.com/5601
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Bradford Beckmann <brad.beckmann@amd.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Bradford Beckmann <brad.beckmann@amd.com>
A KVM VM is typically a child of the System object already, but for
solving future issues with configuration graph resolution, the most
logical way to keep track of this object is for it to be an actual
parameter of the System object.
Change-Id: I965ded22203ff8667db9ca02de0042ff1c772220
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Bugfix for Elastic Traces
This patch fixes the bug when elastic traces are used:
build/ARM/gem5.opt \
configs/example/fs.py \
--cpu-type=arm_detailed \
--num-cpu=1 \
--mem-type=SimpleMemory \
--mem-size=512MB \
--mem-channels=1 \
--caches \
--elastic-trace-en \
--data-trace-file=data.proto.gz \
--inst-trace-file=inst.proto.gz \
--machine-type=VExpress_EMM \
--dtb-filename=vexpress.aarch32.ll_20131205.0-gem5.1cpu.dtb \
--kernel=vmlinux.aarch32.ll_20131205.0-gem5 \
--disk-image=linux-aarch32-ael.img
NameError: global name 'CpuConfig' is not defined
Signed-off by: Jason Lowe-Power <jason@lowepower.com>
Continue along the same line as the recent patch that made the
Ruby-related config scripts Python packages and make also the
configs/common directory a package.
All affected config scripts are updated (hopefully).
Note that this change makes it apparent that the current organisation
and naming of the config directory and its subdirectories is rather
chaotic. We mix scripts that are directly invoked with scripts that
merely contain convenience functions. While it is not addressed in
this patch we should follow up with a re-organisation of the
config structure, and renaming of some of the packages.
This patch moves the addition of network options into the Ruby module
to avoid the regressions all having to add it explicitly. Doing this
exposes an issue in our current config system though, namely the fact
that addtoPath is relative to the Python script being executed. Since
both example and regression scripts use the Ruby module we would end
up with two different (relative) paths being added. Instead we take a
first step at turning the config modules into Python packages, simply
by adding a __init__.py in the configs/ruby, configs/topologies and
configs/network subdirectories.
As a result, we can now add the top-level configs directory to the
Python search path, and then use the package names in the various
modules. The example scripts are also updated, and the messy
path-deducing variations in the scripts are unified.
Add initial support for creating an ARM system with a Ruby-based
memory system. This support is currently experimental and limited to
the new VExpress_GEM5_V1 platform.
Change-Id: I36baeb68b0d891e34ea46aafe17b5e55217b4bfa
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Brad Beckmann <brad.beckmann@amd.com>
This patch adds changes to the configuration scripts to support elastic
tracing and replay.
The patch adds a command line option to enable elastic tracing in SE mode
and FS mode. When enabled the Elastic Trace cpu probe is attached to O3CPU
and a few O3 CPU parameters are tuned. The Elastic Trace probe writes out
both instruction fetch and data dependency traces. The patch also enables
configuring the TraceCPU to replay traces using the SE and FS script.
The replay run is designed to resume from checkpoint using atomic cpu to
restore state keeping it consistent with FS run flow. It then switches to
TraceCPU to replay the input traces.
This patch enables modeling a complete Hybrid Memory Cube (HMC) device. It
highly reuses the existing components in gem5's general memory system with some
small modifications. This changeset requires additional patches to model a
complete HMC device.
Committed by: Nilay Vaish <nilay@cs.wisc.edu>
