This test expects to load a symbol file using the load method of gem5's
SymbolTable class, and then to search through it for a given symbol or
address.
Unfortunately, the type of file it expects to load has a format where
each line is of the form:
0x00000000, symbol_name
where the numerical part is the address of the symbol, and the part
after the comma is the symbol name. I have not been able to find any
tool which outputs a symbol file in this format, or any tool for
inspecting an existing object file which will output symbols in this
format. I looked at objdump, objcopy, nm, and the map file format output
by gnu's linker. nm has 3 different output formats, none of which match.
Usually when working with ELF files, one would just generate a new ELF
file which only had debugging information like the symbol table, and
then strip the symbols out of the original.
Since this file format seems to have been invented from thin air, there
isn't really a good way to generate a canonical file to test the loading
code against, nor is being able to load this obscure format likely to be
useful to anybody. If someone *did* want to load an external symbol
table, they would use the ELF loader and not this.
This CL deletes both this test, and the loading code in SymbolTable.
Change-Id: I20402e3f35e54d1e186a92d9c83d1c06ec86bf7d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40620
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The 32-bit POWER reference test binary was removed in c1ebdf66f
(as a nasty surprise for POWER users).
The remaining platforms split between two approaches:
MIPS rebuilds "hello" from source.
This fails for two reasons:
1) The trivial reason is that on POWER make abends due to no makefile.
2) The more fundamental reason is that gem5 is not completely bug-free
(especially the Decoder on POWER in this case), therefore regression
testing is only possible if we have not just some hello program, but
a very particular bit sequence to serve as an immutable reference.
ARM and X86 follow the reference-bit-sequence approach. POWER will
be consistent with same. Including the sha1 for hello32,
77b27b67393311546e768b5ff35202490bad71aa, as a simple immutability
assurance. I have also renamed hello to hello32 in anticipation to
merge Sandipan's e52dbcb.
Change-Id: I77ef31349c9e50b987c6f58bb23324844527366d
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40635
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Pratik Sampat <pratik.r.sampat@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The default type for VPtr is now void, and the void partial
specialization of VPtr is basically just a fancy container for Addr. Its
purpose is to distinguish guest addresses from actual uint64_t-s in the
signature of simcalls so that types which are purposefully 64 bits will
stay that way, and addresses will scale to the size of pointers in the
target ABI.
Change-Id: I71e2201f5917005861ba678c6675dbcbaa0965b3
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40497
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
This type is primarily used to determine the size of a pointer when
using that ABI, similar to the uintptr_t type, but also less directly
to determine the "native" size of the ABI. For instance, for 32 bit ARM
ABIs, it should be defined as uint32_t since that's both the size of a
uintptr_t, and, less directly, the size of a 32 bit ARM register and
"naturally" sized types in that ABI.
This type can be used by the VPtr template to retrieve its actual value
from a simcall's parameters. In general, when accepting or returning a
pointer or address in a simcall, the VPtr template should be used so
that it's managed correctly by GuestABI. Addr will be treated as a
uint64_t allways which will be incorrect for 32 bit ABIs.
Change-Id: I3af046917387541d6faff96a21a1f1dbf7317e06
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40496
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Although they provide the exact same behavior, the params
created in the tests did not have the type expected by the
internal safe cast.
The following error was triggered:
storage.test.debug: build/NULL/base/cast.hh:47: T safe_cast(U)
[with T = const Stats::SampleStor::Params*;
U = const Stats::StorageParams*]:
Assertion `ret' failed.
Change-Id: I4f2ba51f3ccdb44589e61f235997245e7d9bf3c9
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40555
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
These files were originally used to provide a more gtest like mechanism
for the UnitTest executables, many of which didn't actually test
anything. With the definitions in those files, the tests could check
whether their expectations were met, and either pass or fail without a
human having to inspect the output and knowing what output to expect.
Change-Id: Ie0601391b994859eb544b37201333838fa3ba02a
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40618
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
This "UnitTest" was really not a unit test, it was a timing utility for
measuring the performance of gem5's cprintf implementation. The name was
misleading, but more than that, it was linked against all of gem5 which
created a approximately 1.5 gigabyte binary for what is a very small
program.
Instead, the new version of cprintftime, which has the same
functionality as the old version, weighs in at a svelte 500k with debug
information.
This also trims down the number of misleading "UnitTest" entries to 3,
getting us closer to the point where we can eliminate that type of
entity entirely.
Change-Id: Id30d094f2844e948fe67e820c89412f8667aaa52
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40617
Maintainer: Gabe Black <gabe.black@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
That tag was intended to mark an Executable subclass as abstract, aka
only suitable for using as bases for other Executable subclasses and not
for direct instantiation. The only place it was used was the base
Executable class however, and that class is actually directly useful
when setting up a generic executable from other gem5 sources.
Change-Id: I70204b63c03bb45bf21b8c312a7b8581be5e0cab
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40616
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Daniel Carvalho <odanrc@yahoo.com.br>
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
This DPRINTF accesses the ExtMachInst typed machInst member of the
StaticInst class, and so is ISA dependent. Move the DPRINTF to where the
instructions are actually decoded where that type doesn't have to be
disambiguated.
Also, this change makes this DPRINTF more accurate, since microops are
not really "decoded" when they are extracted from a macroop. The process
of unpacking them to feed into the rest of the CPU should be fairly
trivial, so really they're just being retrieved. With the DPRINTF in
this new position, it will only trigger when an instruction is actually
decoded from memory.
Change-Id: I14145165b93bb004057a729fa7909cd2d3d34d29
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40099
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The only way to allocate fixed sized arrays which will definitely be big
enough for all source/destination registers for a given instruction is
to track the maximum number of each at compile time, and then size the
arrays appropriately. That creates a point of centralization which
prevents breaking up decoder and instruction definitions into more
modular pieces, and if multiple ISAs are ever built at once, would
require coordination between all ISAs, and wasting memory for most of
them.
The dynamic allocation overhead is minimized by allocating the storage
for all variable arrays in one chunk, and then placing the arrays there
using placement new. There is still some overhead, although less than it
might be otherwise.
Change-Id: Id2c42869cba944deb97da01ca9e0e70186e22532
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/38384
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Per the AMD64 Architecture Programming Manual:
The size of the count register (CX, ECX, or RCX) depends on the
address-size attribute of the JrCXZ instruction. Therefore, JRCXZ can
only be executed in 64-bit mode
and
In 64-bit mode, the operand size defaults to 64 bits. The processor
sign-extends the 8-bit displacement value to 64 bits before adding it
to the RIP.
This patch also renames the instruction from JRCX to JRCXZ to match the
language in the programming manual.
Change-Id: Id55147d0602ff41ad6aaef483bef722ff56cae62
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40195
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
We compile GCN3_X86 for the 'quick' tests, as a substitute for X86. We
compile X86 as part of our nightly tests, along with the running of the
'long' tests. This leads to a needless duplicate compilation of the X86
isa during our nightly tests. Therefore, this commit removes GCN3_X86
for the 'long' tests (only the x86 boot tests are affected).
Change-Id: Ifd8aaf0e7b8178c588ace33b27671d4ba9b353ed
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40415
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Reviewed-by: Matt Sinclair <mattdsinclair@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Matt Sinclair <mattdsinclair@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Add an "All" compound debug flag, which encapsulates all
debug flags.
Since this is the broadest compound flag, allowing users
to include it would imply in extremely generic includes.
Moreover, it is highly unlikely that any correct C++ code
would ever use all debug flags. Therefore, a header file
for this flag is not generated to force users to directly
include only the debug flags they need.
Change-Id: If40f2f708be1495fa2b2380266164d5d44d7cffa
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39077
Tested-by: kokoro <noreply+kokoro@google.com>
Reviewed-by: Nathanael Premillieu <nathanael.premillieu@huawei.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
This takes the place of direct access to the machInst field as used in
the MinorCPU model which makes the incorrect assumption that it can
arbitrarily treat the ExtMachInst as an integer, and that masking in a
certain way can meaningfully classify what the instruction will do.
Because that assumption is not correct in general, that had been
ifdef-ed out in most ISAs except ARM, and for the other ISAs the value
was simply set to zero.
Change-Id: I8ac05e65475edc3ccc044afdff09490e2c05ba07
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40098
Reviewed-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Giacomo Travaglini <giacomo.travaglini@arm.com>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Create unit tests for the stats storage types. As a side effect
storage-related classes have been moved to separate files.
HistStor's grow_up, grow_out, and grow_convert have been made
private and renamed to comply with gem5's naming convention
and make grow_convert match its grow_up counterpart (growDown)
which is more suitable for its expected behavior.
The params declarations have been moved to be close to their
storage class' constructor.
HistStor has a explicit condition stating that there must be
at least 2 buckets.
Added documentation!
Fixed grow_convert so that it yields consistent histograms.
Previously buckets could not fully intersect, so doubling their
bucket size would make them steal contents innaproprietly. For
example, the neighbors [-6,-2[, [-2,2[, [2,6[, when doubled,
become [-12,-4[, [-4,4[, [4,12[; however, since the individual
values are not stored, it is impossible to know how to populate
the middle bucket with its neighbor's partial contents.
This fix forces the middle bucket of a storage to have its lower
bound at 0, solving the partial intersection issue.
Change-Id: Idb063e3dbda3cce3a8969e347660143162146eb9
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/25425
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Debug flags are flags that aid with debugging by printing
relevant information when enabled. Debug-formatting flags
define how the debug flags will print the information.
Although a viability, this patch does not support declaring
compound format flags.
As a side effect, now debug flags and debug-formatting flags
are printed in different lists, when using --debug-help.
Change-Id: Ieae68745276218cf4e9c1d37d7bf3bd1f19709ae
Signed-off-by: Daniel R. Carvalho <odanrc@yahoo.com.br>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39076
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
The `file_from_index` function throws a UnicodeDecodeError if a modified
file targetted for style-checking (i.e. source-code) cannot be decoded
using `.decode("utf-8")`.
This check throws an error informing the user a submitted file must be
utf-8 encoded if this case arises.
Change-Id: I2361017f2e7413ed60f897d2301f2e4c7995dd76
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40015
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
Previously if binary blobs were modified the pre-commit hook attempted
to run style-checks on the binary, causing an error when attempting to
decode to utf-8. This commit runs a check on each file to ensure it has
a valid source-code extension prior to running style checks. If a file
does not have a valid extension style checks are not run.
Change-Id: Id1263cac0d6c190ad1a3d67720b3f373e0e42234
Issue-on: https://gem5.atlassian.net/browse/GEM5-903
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/39795
Reviewed-by: Jason Lowe-Power <power.jg@gmail.com>
Maintainer: Jason Lowe-Power <power.jg@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
We currently run regressions with the following command line
./main.py run [...] <directory>
Where <directory> is the positional argument pointing to the tests root
directory: Testlib will walk through the directory and load every
testsuite it encounters in its path.
./main.py run [...] <directory1> <directory2> ...
Allowing testlib to load tests from multiple directories will make it
possible to load out of tree regressions (living in an EXTRAS repository
for example)
JIRA: https://gem5.atlassian.net/browse/GEM5-905
Change-Id: I802d8753a18f4dfb00347252f031b5438e9be672
Signed-off-by: Giacomo Travaglini <giacomo.travaglini@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40136
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
The current tests included don't require boost header to work. Remove
the dependency. This also gets rid of the warning message generated by
the latest boost headers.
Tested by running systemC tests:
src/systemc/tests/verify.py --update-json \
--filter-file=src/systemc/tests/working.filt -j 56 build/ARM/
Change-Id: I9d3bfe145597335abdf24f2de85ed3c0708aea27
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40315
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
This should help reduce warning spew when building with newer compilers.
The pybind11::module type has been renamed pybind11::module_ to avoid
conflicts with c++20 modules, according to the pybind11 changelog, so
this CL also updates gem5 source to use the new type. There is
supposedly an alias pybind11::module which is for compatibility, but we
still get linker errors without changing to pybind11::module_.
Change-Id: I0acb36215b33e3a713866baec43f5af630c356ee
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40255
Maintainer: Bobby R. Bruce <bbruce@ucdavis.edu>
Reviewed-by: Bobby R. Bruce <bbruce@ucdavis.edu>
Tested-by: kokoro <noreply+kokoro@google.com>
Previously we use attribute and event for communication between gem5
SimObject to systemC fastmodel sc_module. Creating a base class allows us
to perform casting once and get all the interface required. Also,
instead of warning on attribute not found, we should make simulator
panic if the sc_module does not provide the interface we need.
Change-Id: I91e1036cb792d556dfc4010e7a0f138b1519b079
Reviewed-on: https://gem5-review.googlesource.com/c/public/gem5/+/40277
Reviewed-by: Gabe Black <gabe.black@gmail.com>
Maintainer: Gabe Black <gabe.black@gmail.com>
Tested-by: kokoro <noreply+kokoro@google.com>
